Du bist nicht angemeldet.

#1 04.06.2020 16:16:57

LotosKaiser04
Mitglied

Arch Linux mit XFCE lädt langsam.

Hallo, ich habe heute mein Arch wieder neu aufgesetzt und immer wen ich den Login über Lightdm abgeschlossen habe erscheint mein Hintergrund und erst nach sehr langer Zeit XFCE mit der Leiste kannz ruckartig.
Bei dem Arch was ich vorher hatte und dem jetztigen Kalli Linux alls zweite Distro geht das unter 2 Sekunden. Aber bei Arch dauert das mindestens 4.
Hat jemand eine Idde?
Meine Vermutung ist das Lightdm sehr lange braucht da XFCE ganz schnell dann nach einiger Zeit kommt.
Vielen Dank für die Hilfe!

Offline

#2 04.06.2020 17:45:16

schard
Moderator

Re: Arch Linux mit XFCE lädt langsam.

Zeig mal deine /var/log/Xorg.0.log.
Sowie folgende Dateien aus deinem $HOME Ordner: .xfce4-session.verbose-log, .xfce4-session.verbose-log.last

Offline

#3 04.06.2020 17:50:59

LotosKaiser04
Mitglied

Re: Arch Linux mit XFCE lädt langsam.

Danke für die schnelle Antwort!

Hier ist die Log Datei:

[     6.035] 
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[     6.035] Build Operating System: Linux Arch Linux
[     6.035] Current Operating System: Linux PC-Alex 5.4.43-1-lts #1 SMP Wed, 27 May 2020 23:42:34 +0000 x86_64
[     6.035] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=837d3794-3075-4c24-94bf-35475e67f68a rw loglevel=3 quiet
[     6.035] Build Date: 05 May 2020  05:08:17AM
[     6.035]  
[     6.035] Current version of pixman: 0.40.0
[     6.035] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     6.035] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.035] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun  4 17:33:23 2020
[     6.042] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.045] (==) No Layout section.  Using the first Screen section.
[     6.045] (==) No screen section available. Using defaults.
[     6.045] (**) |-->Screen "Default Screen Section" (0)
[     6.045] (**) |   |-->Monitor "<default monitor>"
[     6.046] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     6.046] (==) Automatically adding devices
[     6.046] (==) Automatically enabling devices
[     6.046] (==) Automatically adding GPU devices
[     6.046] (==) Automatically binding GPU devices
[     6.046] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     6.048] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     6.048] 	Entry deleted from font path.
[     6.048] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[     6.048] 	Entry deleted from font path.
[     6.048] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     6.048] 	Entry deleted from font path.
[     6.048] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     6.048] 	Entry deleted from font path.
[     6.048] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     6.048] 	Entry deleted from font path.
[     6.048] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     6.048] 	Entry deleted from font path.
[     6.048] (==) FontPath set to:
	
[     6.048] (==) ModulePath set to "/usr/lib/xorg/modules"
[     6.048] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     6.048] (II) Module ABI versions:
[     6.048] 	X.Org ANSI C Emulation: 0.4
[     6.048] 	X.Org Video Driver: 24.1
[     6.048] 	X.Org XInput driver : 24.1
[     6.048] 	X.Org Server Extension : 10.0
[     6.048] (++) using VT number 7

[     6.048] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     6.049] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.050] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     6.051] (--) PCI:*(1@0:0:0) 10de:1c82:1458:3763 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[     6.051] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     6.051] (II) LoadModule: "glx"
[     6.054] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.080] (II) Module glx: vendor="X.Org Foundation"
[     6.080] 	compiled for 1.20.8, module version = 1.0.0
[     6.080] 	ABI class: X.Org Server Extension, version 10.0
[     6.080] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[     6.080] 	loading driver: nvidia
[     6.080] (==) Matched nvidia as autoconfigured driver 0
[     6.080] (==) Matched nouveau as autoconfigured driver 1
[     6.080] (==) Matched nv as autoconfigured driver 2
[     6.080] (==) Matched modesetting as autoconfigured driver 3
[     6.080] (==) Matched fbdev as autoconfigured driver 4
[     6.080] (==) Matched vesa as autoconfigured driver 5
[     6.080] (==) Assigned the driver to the xf86ConfigLayout
[     6.080] (II) LoadModule: "nvidia"
[     6.080] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     6.094] (II) Module nvidia: vendor="NVIDIA Corporation"
[     6.094] 	compiled for 1.6.99.901, module version = 1.0.0
[     6.094] 	Module class: X.Org Video Driver
[     6.096] (II) LoadModule: "nouveau"
[     6.097] (WW) Warning, couldn't open module nouveau
[     6.097] (EE) Failed to load module "nouveau" (module does not exist, 0)
[     6.097] (II) LoadModule: "nv"
[     6.097] (WW) Warning, couldn't open module nv
[     6.097] (EE) Failed to load module "nv" (module does not exist, 0)
[     6.097] (II) LoadModule: "modesetting"
[     6.097] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     6.104] (II) Module modesetting: vendor="X.Org Foundation"
[     6.104] 	compiled for 1.20.8, module version = 1.20.8
[     6.104] 	Module class: X.Org Video Driver
[     6.104] 	ABI class: X.Org Video Driver, version 24.1
[     6.104] (II) LoadModule: "fbdev"
[     6.104] (WW) Warning, couldn't open module fbdev
[     6.104] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     6.104] (II) LoadModule: "vesa"
[     6.105] (WW) Warning, couldn't open module vesa
[     6.105] (EE) Failed to load module "vesa" (module does not exist, 0)
[     6.106] (II) NVIDIA dlloader X Driver  440.82  Wed Apr  1 19:50:17 UTC 2020
[     6.106] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     6.107] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     6.111] (II) Loading sub module "fb"
[     6.111] (II) LoadModule: "fb"
[     6.111] (II) Loading /usr/lib/xorg/modules/libfb.so
[     6.114] (II) Module fb: vendor="X.Org Foundation"
[     6.114] 	compiled for 1.20.8, module version = 1.0.0
[     6.114] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.114] (II) Loading sub module "wfb"
[     6.114] (II) LoadModule: "wfb"
[     6.114] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     6.116] (II) Module wfb: vendor="X.Org Foundation"
[     6.116] 	compiled for 1.20.8, module version = 1.0.0
[     6.116] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.116] (II) Loading sub module "ramdac"
[     6.116] (II) LoadModule: "ramdac"
[     6.116] (II) Module "ramdac" already built-in
[     6.118] (WW) Falling back to old probe method for modesetting
[     6.118] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     6.118] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[     6.118] (==) NVIDIA(0): RGB weight 888
[     6.118] (==) NVIDIA(0): Default visual is TrueColor
[     6.118] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.119] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[     6.119] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[     6.119] (**) NVIDIA(0): Enabling 2D acceleration
[     6.119] (II) Loading sub module "glxserver_nvidia"
[     6.119] (II) LoadModule: "glxserver_nvidia"
[     6.119] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[     6.224] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[     6.224] 	compiled for 1.6.99.901, module version = 1.0.0
[     6.224] 	Module class: X.Org Server Extension
[     6.225] (II) NVIDIA GLX Module  440.82  Wed Apr  1 19:47:36 UTC 2020
[     6.228] (II) NVIDIA: The X server supports PRIME Render Offload.
[     7.068] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     7.068] (--) NVIDIA(0):     DFP-0 (boot)
[     7.068] (--) NVIDIA(0):     DFP-1
[     7.068] (--) NVIDIA(0):     DFP-2
[     7.068] (--) NVIDIA(0):     DFP-3
[     7.069] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 Ti (GP107-A) at PCI:1:0:0 (GPU-0)
[     7.069] (--) NVIDIA(0): Memory: 4194304 kBytes
[     7.069] (--) NVIDIA(0): VideoBIOS: 86.07.42.00.99
[     7.069] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     7.084] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[     7.084] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[     7.084] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[     7.084] (--) NVIDIA(GPU-0): 
[     7.114] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): connected
[     7.114] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): Internal TMDS
[     7.114] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[     7.114] (--) NVIDIA(GPU-0): 
[     7.114] (--) NVIDIA(GPU-0): DFP-2: disconnected
[     7.114] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[     7.114] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[     7.114] (--) NVIDIA(GPU-0): 
[     7.114] (--) NVIDIA(GPU-0): DFP-3: disconnected
[     7.114] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[     7.114] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[     7.114] (--) NVIDIA(GPU-0): 
[     7.122] (==) NVIDIA(0): 
[     7.122] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[     7.122] (==) NVIDIA(0):     will be used as the requested mode.
[     7.122] (==) NVIDIA(0): 
[     7.122] (II) NVIDIA(0): Validated MetaModes:
[     7.122] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[     7.122] (II) NVIDIA(0): Virtual screen size determined to be 3360 x 1080
[     7.126] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[     7.126] (--) NVIDIA(0):     option
[     7.126] (II) UnloadModule: "modesetting"
[     7.126] (II) Unloading modesetting
[     7.126] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[     7.126] (II) NVIDIA:     access.
[     7.128] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     7.128] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     7.128] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     7.128] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     7.128] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     7.128] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     7.128] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     7.128] (II) NVIDIA(0):     Config Options in the README.
[     7.151] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[     7.226] (==) NVIDIA(0): Disabling shared memory pixmaps
[     7.226] (==) NVIDIA(0): Backing store enabled
[     7.226] (==) NVIDIA(0): Silken mouse disabled
[     7.227] (==) NVIDIA(0): DPMS enabled
[     7.227] (II) Loading sub module "dri2"
[     7.227] (II) LoadModule: "dri2"
[     7.227] (II) Module "dri2" already built-in
[     7.227] (II) NVIDIA(0): [DRI2] Setup complete
[     7.227] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     7.229] (II) Initializing extension Generic Event Extension
[     7.229] (II) Initializing extension SHAPE
[     7.229] (II) Initializing extension MIT-SHM
[     7.229] (II) Initializing extension XInputExtension
[     7.229] (II) Initializing extension XTEST
[     7.229] (II) Initializing extension BIG-REQUESTS
[     7.229] (II) Initializing extension SYNC
[     7.229] (II) Initializing extension XKEYBOARD
[     7.229] (II) Initializing extension XC-MISC
[     7.229] (II) Initializing extension SECURITY
[     7.229] (II) Initializing extension XFIXES
[     7.229] (II) Initializing extension RENDER
[     7.230] (II) Initializing extension RANDR
[     7.230] (II) Initializing extension COMPOSITE
[     7.230] (II) Initializing extension DAMAGE
[     7.230] (II) Initializing extension MIT-SCREEN-SAVER
[     7.230] (II) Initializing extension DOUBLE-BUFFER
[     7.230] (II) Initializing extension RECORD
[     7.230] (II) Initializing extension DPMS
[     7.230] (II) Initializing extension Present
[     7.230] (II) Initializing extension DRI3
[     7.230] (II) Initializing extension X-Resource
[     7.230] (II) Initializing extension XVideo
[     7.230] (II) Initializing extension XVideo-MotionCompensation
[     7.230] (II) Initializing extension GLX
[     7.230] (II) Initializing extension GLX
[     7.231] (II) Indirect GLX disabled.
[     7.231] (II) GLX: Another vendor is already registered for screen 0
[     7.231] (II) Initializing extension XFree86-VidModeExtension
[     7.231] (II) Initializing extension XFree86-DGA
[     7.231] (II) Initializing extension XFree86-DRI
[     7.231] (II) Initializing extension DRI2
[     7.231] (II) Initializing extension NV-GLX
[     7.231] (II) Initializing extension NV-CONTROL
[     7.231] (II) Initializing extension XINERAMA
[     7.313] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     7.313] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     7.313] (II) LoadModule: "libinput"
[     7.313] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     7.318] (II) Module libinput: vendor="X.Org Foundation"
[     7.318] 	compiled for 1.20.8, module version = 0.30.0
[     7.318] 	Module class: X.Org XInput Driver
[     7.318] 	ABI class: X.Org XInput driver, version 24.1
[     7.318] (II) Using input driver 'libinput' for 'Power Button'
[     7.318] (**) Power Button: always reports core events
[     7.318] (**) Option "Device" "/dev/input/event1"
[     7.318] (**) Option "_source" "server/udev"
[     7.324] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     7.324] (II) event1  - Power Button: device is a keyboard
[     7.324] (II) event1  - Power Button: device removed
[     7.383] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[     7.383] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     7.385] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     7.385] (II) event1  - Power Button: device is a keyboard
[     7.386] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     7.386] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     7.386] (II) Using input driver 'libinput' for 'Power Button'
[     7.386] (**) Power Button: always reports core events
[     7.386] (**) Option "Device" "/dev/input/event0"
[     7.386] (**) Option "_source" "server/udev"
[     7.387] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     7.387] (II) event0  - Power Button: device is a keyboard
[     7.388] (II) event0  - Power Button: device removed
[     7.433] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     7.433] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     7.435] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     7.435] (II) event0  - Power Button: device is a keyboard
[     7.436] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[     7.436] (II) No input driver specified, ignoring this device.
[     7.436] (II) This device may have been added with another device file.
[     7.437] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[     7.437] (II) No input driver specified, ignoring this device.
[     7.437] (II) This device may have been added with another device file.
[     7.437] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[     7.437] (II) No input driver specified, ignoring this device.
[     7.437] (II) This device may have been added with another device file.
[     7.438] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[     7.438] (II) No input driver specified, ignoring this device.
[     7.438] (II) This device may have been added with another device file.
[     7.438] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
[     7.438] (II) No input driver specified, ignoring this device.
[     7.438] (II) This device may have been added with another device file.
[     7.439] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
[     7.439] (II) No input driver specified, ignoring this device.
[     7.439] (II) This device may have been added with another device file.
[     7.439] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event12)
[     7.439] (II) No input driver specified, ignoring this device.
[     7.439] (II) This device may have been added with another device file.
[     7.440] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event13)
[     7.440] (II) No input driver specified, ignoring this device.
[     7.440] (II) This device may have been added with another device file.
[     7.441] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event2)
[     7.441] (**) Logitech Gaming Mouse G502: Applying InputClass "libinput pointer catchall"
[     7.441] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502'
[     7.441] (**) Logitech Gaming Mouse G502: always reports core events
[     7.441] (**) Option "Device" "/dev/input/event2"
[     7.441] (**) Option "_source" "server/udev"
[     7.505] (II) event2  - Logitech Gaming Mouse G502: is tagged by udev as: Mouse
[     7.506] (II) event2  - Logitech Gaming Mouse G502: device is a pointer
[     7.506] (II) event2  - Logitech Gaming Mouse G502: device removed
[     7.603] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:046D:C07D.0001/input/input2/event2"
[     7.603] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: MOUSE, id 8)
[     7.603] (**) Option "AccelerationScheme" "none"
[     7.603] (**) Logitech Gaming Mouse G502: (accel) selected scheme none/0
[     7.603] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000
[     7.603] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4
[     7.675] (II) event2  - Logitech Gaming Mouse G502: is tagged by udev as: Mouse
[     7.676] (II) event2  - Logitech Gaming Mouse G502: device is a pointer
[     7.677] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/mouse0)
[     7.677] (II) No input driver specified, ignoring this device.
[     7.677] (II) This device may have been added with another device file.
[     7.678] (II) config/udev: Adding input device Logitech Gaming Mouse G502 Keyboard (/dev/input/event3)
[     7.678] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall"
[     7.678] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Keyboard'
[     7.678] (**) Logitech Gaming Mouse G502 Keyboard: always reports core events
[     7.678] (**) Option "Device" "/dev/input/event3"
[     7.678] (**) Option "_source" "server/udev"
[     7.680] (II) event3  - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard
[     7.681] (II) event3  - Logitech Gaming Mouse G502 Keyboard: device is a keyboard
[     7.681] (II) event3  - Logitech Gaming Mouse G502 Keyboard: device removed
[     7.743] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:046D:C07D.0002/input/input3/event3"
[     7.743] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Keyboard" (type: KEYBOARD, id 9)
[     7.746] (II) event3  - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard
[     7.746] (II) event3  - Logitech Gaming Mouse G502 Keyboard: device is a keyboard
[     7.747] (II) config/udev: Adding input device Logitech Gaming Mouse G502 Consumer Control (/dev/input/event4)
[     7.748] (**) Logitech Gaming Mouse G502 Consumer Control: Applying InputClass "libinput keyboard catchall"
[     7.748] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Consumer Control'
[     7.748] (**) Logitech Gaming Mouse G502 Consumer Control: always reports core events
[     7.748] (**) Option "Device" "/dev/input/event4"
[     7.748] (**) Option "_source" "server/udev"
[     7.750] (II) event4  - Logitech Gaming Mouse G502 Consumer Control: is tagged by udev as: Keyboard
[     7.750] (II) event4  - Logitech Gaming Mouse G502 Consumer Control: device is a keyboard
[     7.750] (II) event4  - Logitech Gaming Mouse G502 Consumer Control: device removed
[     7.793] (II) libinput: Logitech Gaming Mouse G502 Consumer Control: needs a virtual subdevice
[     7.793] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:046D:C07D.0002/input/input4/event4"
[     7.793] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Consumer Control" (type: MOUSE, id 10)
[     7.793] (**) Option "AccelerationScheme" "none"
[     7.793] (**) Logitech Gaming Mouse G502 Consumer Control: (accel) selected scheme none/0
[     7.793] (**) Logitech Gaming Mouse G502 Consumer Control: (accel) acceleration factor: 2.000
[     7.793] (**) Logitech Gaming Mouse G502 Consumer Control: (accel) acceleration threshold: 4
[     7.796] (II) event4  - Logitech Gaming Mouse G502 Consumer Control: is tagged by udev as: Keyboard
[     7.796] (II) event4  - Logitech Gaming Mouse G502 Consumer Control: device is a keyboard
[     7.797] (II) config/udev: Adding input device Logitech Gaming Mouse G502 System Control (/dev/input/event5)
[     7.797] (**) Logitech Gaming Mouse G502 System Control: Applying InputClass "libinput keyboard catchall"
[     7.797] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 System Control'
[     7.797] (**) Logitech Gaming Mouse G502 System Control: always reports core events
[     7.797] (**) Option "Device" "/dev/input/event5"
[     7.797] (**) Option "_source" "server/udev"
[     7.800] (II) event5  - Logitech Gaming Mouse G502 System Control: is tagged by udev as: Keyboard
[     7.800] (II) event5  - Logitech Gaming Mouse G502 System Control: device is a keyboard
[     7.800] (II) event5  - Logitech Gaming Mouse G502 System Control: device removed
[     7.833] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:046D:C07D.0002/input/input5/event5"
[     7.833] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 System Control" (type: KEYBOARD, id 11)
[     7.836] (II) event5  - Logitech Gaming Mouse G502 System Control: is tagged by udev as: Keyboard
[     7.836] (II) event5  - Logitech Gaming Mouse G502 System Control: device is a keyboard
[     7.837] (II) config/udev: Adding input device Logitech Gaming Keyboard G105 (/dev/input/event6)
[     7.837] (**) Logitech Gaming Keyboard G105: Applying InputClass "libinput keyboard catchall"
[     7.837] (II) Using input driver 'libinput' for 'Logitech Gaming Keyboard G105'
[     7.837] (**) Logitech Gaming Keyboard G105: always reports core events
[     7.837] (**) Option "Device" "/dev/input/event6"
[     7.837] (**) Option "_source" "server/udev"
[     7.840] (II) event6  - Logitech Gaming Keyboard G105: is tagged by udev as: Keyboard
[     7.840] (II) event6  - Logitech Gaming Keyboard G105: device is a keyboard
[     7.840] (II) event6  - Logitech Gaming Keyboard G105: device removed
[     7.893] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.4/3-1.4:1.0/0003:046D:C248.0003/input/input8/event6"
[     7.893] (II) XINPUT: Adding extended input device "Logitech Gaming Keyboard G105" (type: KEYBOARD, id 12)
[     7.896] (II) event6  - Logitech Gaming Keyboard G105: is tagged by udev as: Keyboard
[     7.896] (II) event6  - Logitech Gaming Keyboard G105: device is a keyboard
[     7.897] (II) config/udev: Adding input device Logitech Gaming Keyboard G105 Consumer Control (/dev/input/event7)
[     7.897] (**) Logitech Gaming Keyboard G105 Consumer Control: Applying InputClass "libinput keyboard catchall"
[     7.897] (II) Using input driver 'libinput' for 'Logitech Gaming Keyboard G105 Consumer Control'
[     7.897] (**) Logitech Gaming Keyboard G105 Consumer Control: always reports core events
[     7.897] (**) Option "Device" "/dev/input/event7"
[     7.897] (**) Option "_source" "server/udev"
[     7.900] (II) event7  - Logitech Gaming Keyboard G105 Consumer Control: is tagged by udev as: Keyboard
[     7.900] (II) event7  - Logitech Gaming Keyboard G105 Consumer Control: device is a keyboard
[     7.900] (II) event7  - Logitech Gaming Keyboard G105 Consumer Control: device removed
[     8.013] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:046D:C248.0004/input/input9/event7"
[     8.013] (II) XINPUT: Adding extended input device "Logitech Gaming Keyboard G105 Consumer Control" (type: KEYBOARD, id 13)
[     8.016] (II) event7  - Logitech Gaming Keyboard G105 Consumer Control: is tagged by udev as: Keyboard
[     8.016] (II) event7  - Logitech Gaming Keyboard G105 Consumer Control: device is a keyboard
[     8.017] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event14)
[     8.017] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     8.017] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[     8.017] (**) Eee PC WMI hotkeys: always reports core events
[     8.017] (**) Option "Device" "/dev/input/event14"
[     8.017] (**) Option "_source" "server/udev"
[     8.018] (II) event14 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[     8.018] (II) event14 - Eee PC WMI hotkeys: device is a keyboard
[     8.019] (II) event14 - Eee PC WMI hotkeys: device removed
[     8.103] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input17/event14"
[     8.103] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 14)
[     8.105] (II) event14 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[     8.105] (II) event14 - Eee PC WMI hotkeys: device is a keyboard
[     8.106] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[     8.106] (II) No input driver specified, ignoring this device.
[     8.106] (II) This device may have been added with another device file.
[     8.112] (**) Logitech Gaming Mouse G502 Consumer Control: Applying InputClass "libinput keyboard catchall"
[     8.112] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Consumer Control'
[     8.112] (**) Logitech Gaming Mouse G502 Consumer Control: always reports core events
[     8.112] (**) Option "Device" "/dev/input/event4"
[     8.112] (**) Option "_source" "_driver/libinput"
[     8.112] (II) libinput: Logitech Gaming Mouse G502 Consumer Control: is a virtual subdevice
[     8.112] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:046D:C07D.0002/input/input4/event4"
[     8.112] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Consumer Control" (type: KEYBOARD, id 15)
[     8.113] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[     8.113] (II) No input driver specified, ignoring this device.
[     8.113] (II) This device may have been added with another device file.
[     8.114] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[     8.114] (II) No input driver specified, ignoring this device.
[     8.114] (II) This device may have been added with another device file.
[     8.114] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17)
[     8.114] (II) No input driver specified, ignoring this device.
[     8.114] (II) This device may have been added with another device file.
[    13.044] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[    13.044] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[    13.044] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[    13.044] (--) NVIDIA(GPU-0): 
[    13.073] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): connected
[    13.073] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): Internal TMDS
[    13.073] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[    13.073] (--) NVIDIA(GPU-0): 
[    13.073] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    13.073] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[    13.073] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[    13.073] (--) NVIDIA(GPU-0): 
[    13.074] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    13.074] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[    13.074] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[    13.074] (--) NVIDIA(GPU-0): 

Und xfce4-session.verbose-log, .xfce4-session.verbose-log.last existieren nicht.

Offline

#4 04.06.2020 20:21:25

nudelholz
Gast

Re: Arch Linux mit XFCE lädt langsam.

Hi,
-In der log lese ich was von nvidia und nouveau sowie nv. Welchen hast du nun installiert? Bzw. Welchen Treiber willst du denn nutzen, nvidia oder nouveau? Falls du den nvidia Treiber willst installiere nvidia-dkms (bei mir tukkert damit auch eine 1050ti).

-was hast du alles an *.conf Dateien in /etc/X11/xorg.conf.d? Prüf dort bitte, ob da eine Datei mit Section "Device" und Eintrag Driver ist.

#5 05.06.2020 09:24:27

LotosKaiser04
Mitglied

Re: Arch Linux mit XFCE lädt langsam.

Hallo ich benutze die Treiber von Nvidia da nouveau nur Probleme gemacht hat. Diese hab ich aber auch wieder deinstalliert und momentan garnicht installiert,
Unter dem Ordner /etc/X11/xorg.conf.d sind keine Datein, aber müsste nvidia-xconfig die nicht anlegen?

Offline

#6 15.06.2020 15:28:46

LotosKaiser04
Mitglied

Re: Arch Linux mit XFCE lädt langsam.

Hat jemand eine Idee? Ich hab das Problem immer noch nicht gelöst bekommen.

Offline

#7 17.06.2020 20:42:59

Nick_0278
Mitglied

Re: Arch Linux mit XFCE lädt langsam.

Du meinst, dass du aktuell *keinen* Grafiktreiber installiert hast?

Wenn du kannst würde mir jetzt als einziges einfallen testweise mal KDE oder GNOME zu installieren.

Offline

#8 18.06.2020 18:50:29

LotosKaiser04
Mitglied

Re: Arch Linux mit XFCE lädt langsam.

Doch ich hab den Treiber von Nvidia da wie gesagt nouveau nicht funktioniert.

Offline

#9 19.06.2020 00:59:28

stefanhusmann
Moderator

Re: Arch Linux mit XFCE lädt langsam.

LotosKaiser04 schrieb:

Hat jemand eine Idee? Ich hab das Problem immer noch nicht gelöst bekommen.

Doch, oben hatte schon jemand eine Idee (nvidia-dkms installieren). Du hast nicht geschrieben, dass du dies irgendwie berücksichtigt oder ausprobiert hättest.

LotosKaiser04 schrieb:

Doch ich hab den Treiber von Nvidia da wie gesagt nouveau nicht funktioniert.

Du hast aber in dem Post geschrieben, dass du die Nvidia-Treiber denistalliert hast. Daher die Verwirrung.

LotosKaiser04 schrieb:

Unter dem Ordner /etc/X11/xorg.conf.d sind keine Datein, aber müsste nvidia-xconfig die nicht anlegen?

Wenn ich mich richtig erinnere, tut nvdia-config genau das nicht, sondern erzeugt nur eine xorg.conf. Ich nutze allerdings nouveau und auch nicht testen, da meine Graphikkarte zu alt ist.

Offline

#10 20.06.2020 07:54:55

LotosKaiser04
Mitglied

Re: Arch Linux mit XFCE lädt langsam.

Danke für die Hilfe! Ich habe Arch neu Aufgesetzt und hatte nur die Nvidia Treiber installiert und es hat funktioniert!

Offline

Schnellantwort auf dieses Thema

Schreibe deinen Beitrag und versende ihn
Deine Antwort

Fußzeile des Forums