Dirk schrieb
Die Usergruppen sind (vorerst) egal.
...
Oder du legst sauber eine neue Gruppe an, und fügst da die User hinzu die Zugriff haben sollen.
Ahja 😉
So sieht das bei mir aus:
lsusb
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 8087:07dc Intel Corp.
Bus 002 Device 008: ID 04d9:a131 Holtek Semiconductor, Inc.
Bus 002 Device 007: ID 1ea7:1006 SHARKOON Technologies GmbH
Bus 002 Device 011: ID 0c4b:0501 Reiner SCT Kartensysteme GmbH cyberJack RFID comfort dual interface smartcard reader
Bus 002 Device 010: ID 152e:2507 LG (HLDS) PL-2507 IDE Controller
Bus 002 Device 002: ID 0424:2514 Microchip Technology, Inc. (formerly SMSC) USB 2.0 Hub
Bus 002 Device 005: ID 1c7a:0603 LighTuning Technology Inc. EgisTec_ES603
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsusb -t
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/14p, 480M
|__ Port 6: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 10, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 4: Dev 8, If 2, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 8, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 8, If 3, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 4: Dev 8, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 2: Dev 11, If 0, Class=Vendor Specific Class, Driver=, 12M
|__ Port 3: Dev 7, If 1, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 3: Dev 7, If 0, Class=Human Interface Device, Driver=usbhid, 12M
|__ Port 7: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
|__ Port 7: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 11: Dev 5, If 0, Class=Vendor Specific Class, Driver=, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
ls -al /dev/bus/usb/002/011
crw-rw-r-- 1 root root 189, 138 11. Mai 17:40 /dev/bus/usb/002/011
Bringt dem TO jetzt alles nix, allerdings habe ich keine udev-Regeln jemals für das Gerät angelegt oder eine Gruppe dafür bemühen müssen.