Du bist nicht angemeldet.

#1 16.04.2020 22:34:00

Zeke
Mitglied

USB Microfon geht nicht

Hallo,

vielleicht kann mir jemand helfen. Und war habe ich mein Jabra USB Headset eingesteckt, welches auch von pavucontrol erkannt wird, jedoch funktioniert das Mikrofon nicht, obwohl es ausgewählt ist.
Ich finde einfach keine Lösung dafür. Auf mute ist es nicht.
Danke.

Offline

#2 16.04.2020 23:42:25

Dirk
Moderator

Re: USB Microfon geht nicht

Wichtige Informationen (Name des Headsets, Ausgabe von dmesg nach dem Einstecken, Name des Programms in dem es nicht funktioniert, etc.) fehlen leider, daher nur Rätselraten.

Hast du einfach in pavucontrol mal unter „Eingabegeräte“ den Regler hoch gedreht? Weit über „Basis“ oder „100%“? Und womit willst du das Mikrofon aufnehmen? Eventuell ist es in der entsprechenden Anwendung nicht ausgewählt.

Offline

#3 17.04.2020 07:16:33

Zeke
Mitglied

Re: USB Microfon geht nicht

Modell: Jabra BIZ 2400 II
dmesg:

[    0.000000] Linux version 5.6.3-arch1-1 (linux@archlinux) (gcc version 9.3.0 (Arch Linux 9.3.0-1)) #1 SMP PREEMPT Wed, 08 Apr 2020 07:47:16 +0000
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e65fca54-9e18-4b86-8251-148f121305c2 rw
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d922afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d922b000-0x00000000d9939fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d993a000-0x00000000d9a84fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9a85000-0x00000000d9e24fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d9e25000-0x00000000da4aefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000da4af000-0x00000000da4affff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da4b0000-0x00000000da4f2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da4f3000-0x00000000dad65fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dad66000-0x00000000daff1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000daff2000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Dell Inc. Vostro 270s  /0XFWHV       , BIOS A09 11/22/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3293.614 MHz processor
[    0.001670] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001672] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001678] last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[    0.001682] MTRR default type: uncachable
[    0.001682] MTRR fixed ranges enabled:
[    0.001683]   00000-9FFFF write-back
[    0.001684]   A0000-BFFFF uncachable
[    0.001685]   C0000-CFFFF write-protect
[    0.001685]   D0000-E7FFF uncachable
[    0.001686]   E8000-FFFFF write-protect
[    0.001686] MTRR variable ranges enabled:
[    0.001688]   0 base 000000000 mask E00000000 write-back
[    0.001689]   1 base 200000000 mask FE0000000 write-back
[    0.001689]   2 base 0E0000000 mask FE0000000 uncachable
[    0.001690]   3 base 0DC000000 mask FFC000000 uncachable
[    0.001691]   4 base 0DB800000 mask FFF800000 uncachable
[    0.001691]   5 base 21F000000 mask FFF000000 uncachable
[    0.001692]   6 base 21E800000 mask FFF800000 uncachable
[    0.001693]   7 base 21E600000 mask FFFE00000 uncachable
[    0.001693]   8 disabled
[    0.001694]   9 disabled
[    0.002080] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002285] total RAM covered: 8094M
[    0.002501] Found optimal setting for mtrr clean up
[    0.002502]  gran_size: 64K 	chunk_size: 128M 	num_reg: 10  	lose cover RAM: 0G
[    0.002837] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[    0.002840] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.010757] found SMP MP-table at [mem 0x000fdb20-0x000fdb2f]
[    0.026894] check: Scanning 1 areas for low memory corruption
[    0.026899] BRK [0x16a01000, 0x16a01fff] PGTABLE
[    0.026901] BRK [0x16a02000, 0x16a02fff] PGTABLE
[    0.026902] BRK [0x16a03000, 0x16a03fff] PGTABLE
[    0.026920] BRK [0x16a04000, 0x16a04fff] PGTABLE
[    0.026922] BRK [0x16a05000, 0x16a05fff] PGTABLE
[    0.026974] BRK [0x16a06000, 0x16a06fff] PGTABLE
[    0.027020] BRK [0x16a07000, 0x16a07fff] PGTABLE
[    0.027021] BRK [0x16a08000, 0x16a08fff] PGTABLE
[    0.027074] BRK [0x16a09000, 0x16a09fff] PGTABLE
[    0.027088] BRK [0x16a0a000, 0x16a0afff] PGTABLE
[    0.027119] BRK [0x16a0b000, 0x16a0bfff] PGTABLE
[    0.027179] BRK [0x16a0c000, 0x16a0cfff] PGTABLE
[    0.027454] RAMDISK: [mem 0x35d35000-0x36e91fff]
[    0.027458] ACPI: Early table checksum verification disabled
[    0.027461] ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL  )
[    0.027463] ACPI: XSDT 0x00000000D9E16080 00007C (v01 DELL   WN09     01072009 AMI  00010013)
[    0.027468] ACPI: FACP 0x00000000D9E1FB68 00010C (v05 DELL   WN09     01072009 AMI  00010013)
[    0.027473] ACPI: DSDT 0x00000000D9E16190 0099D1 (v02 DELL   WN09     00000000 INTL 20051117)
[    0.027475] ACPI: FACS 0x00000000D9E23080 000040
[    0.027477] ACPI: APIC 0x00000000D9E1FC78 000072 (v03 DELL   WN09     01072009 AMI  00010013)
[    0.027479] ACPI: FPDT 0x00000000D9E1FCF0 000044 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.027482] ACPI: MCFG 0x00000000D9E1FD38 00003C (v01 DELL   WN09     01072009 MSFT 00000097)
[    0.027484] ACPI: SLIC 0x00000000D9E1FD78 000176 (v01 DELL   WN09     01072009 AMI  00010013)
[    0.027486] ACPI: HPET 0x00000000D9E1FEF0 000038 (v01 DELL   WN09     01072009 AMI. 00000005)
[    0.027488] ACPI: SSDT 0x00000000D9E1FF28 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.027491] ACPI: MSDM 0x00000000D9E20298 000055 (v03 DELL   WN09     01072009 AMI  00010013)
[    0.027493] ACPI: SSDT 0x00000000D9E202F0 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.027495] ACPI: SSDT 0x00000000D9E20CA0 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.027498] ACPI: ASF! 0x00000000D9E21738 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.027505] ACPI: Local APIC address 0xfee00000
[    0.027571] No NUMA configuration found
[    0.027572] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
[    0.027575] NODE_DATA(0) allocated [mem 0x21e5f5000-0x21e5f8fff]
[    0.027595] Zone ranges:
[    0.027596]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.027597]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.027598]   Normal   [mem 0x0000000100000000-0x000000021e5fffff]
[    0.027598]   Device   empty
[    0.027599] Movable zone start for each node
[    0.027600] Early memory node ranges
[    0.027600]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.027601]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.027602]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.027602]   node   0: [mem 0x0000000040005000-0x00000000d922afff]
[    0.027603]   node   0: [mem 0x00000000d993a000-0x00000000d9a84fff]
[    0.027604]   node   0: [mem 0x00000000da4af000-0x00000000da4affff]
[    0.027604]   node   0: [mem 0x00000000da4f3000-0x00000000dad65fff]
[    0.027605]   node   0: [mem 0x00000000daff2000-0x00000000daffffff]
[    0.027605]   node   0: [mem 0x0000000100000000-0x000000021e5fffff]
[    0.027894] Zeroed struct page in unavailable ranges: 32877 pages
[    0.027896] Initmem setup node 0 [mem 0x0000000000001000-0x000000021e5fffff]
[    0.027897] On node 0 totalpages: 2064275
[    0.027898]   DMA zone: 64 pages used for memmap
[    0.027898]   DMA zone: 21 pages reserved
[    0.027899]   DMA zone: 3996 pages, LIFO batch:0
[    0.027951]   DMA32 zone: 13864 pages used for memmap
[    0.027952]   DMA32 zone: 887287 pages, LIFO batch:63
[    0.039338]   Normal zone: 18328 pages used for memmap
[    0.039340]   Normal zone: 1172992 pages, LIFO batch:63
[    0.053680] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[    0.053803] ACPI: PM-Timer IO Port: 0x408
[    0.053805] ACPI: Local APIC address 0xfee00000
[    0.053812] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.053823] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.053825] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.053826] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.053827] ACPI: IRQ0 used by override.
[    0.053828] ACPI: IRQ9 used by override.
[    0.053830] Using ACPI (MADT) for SMP configuration information
[    0.053831] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.053836] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.053855] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.053856] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.053857] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.053857] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.053858] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.053859] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.053860] PM: hibernation: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.053861] PM: hibernation: Registered nosave memory: [mem 0xd922b000-0xd9939fff]
[    0.053862] PM: hibernation: Registered nosave memory: [mem 0xd9a85000-0xd9e24fff]
[    0.053863] PM: hibernation: Registered nosave memory: [mem 0xd9e25000-0xda4aefff]
[    0.053864] PM: hibernation: Registered nosave memory: [mem 0xda4b0000-0xda4f2fff]
[    0.053865] PM: hibernation: Registered nosave memory: [mem 0xdad66000-0xdaff1fff]
[    0.053867] PM: hibernation: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[    0.053867] PM: hibernation: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
[    0.053868] PM: hibernation: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.053868] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.053869] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.053869] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.053870] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.053870] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.053871] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.053871] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.053872] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.053872] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.053873] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.053873] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.053875] [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.053875] Booting paravirtualized kernel on bare hardware
[    0.053878] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.057431] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.057626] percpu: Embedded 57 pages/cpu s196608 r8192 d28672 u524288
[    0.057632] pcpu-alloc: s196608 r8192 d28672 u524288 alloc=1*2097152
[    0.057633] pcpu-alloc: [0] 0 1 2 3 
[    0.057652] Built 1 zonelists, mobility grouping on.  Total pages: 2031998
[    0.057653] Policy zone: Normal
[    0.057654] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e65fca54-9e18-4b86-8251-148f121305c2 rw
[    0.058120] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.058340] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.058387] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
[    0.082633] Memory: 7998176K/8257100K available (12291K kernel code, 1463K rwdata, 4500K rodata, 1620K init, 3220K bss, 258924K reserved, 0K cma-reserved)
[    0.082641] random: get_random_u64 called from __kmem_cache_create+0x3e/0x520 with crng_init=0
[    0.082739] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.082751] Kernel/User page tables isolation: enabled
[    0.082766] ftrace: allocating 40145 entries in 157 pages
[    0.094531] ftrace: allocated 157 pages with 5 groups
[    0.094626] rcu: Preemptible hierarchical RCU implementation.
[    0.094626] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.094627] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.094628] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.094628] 	Tasks RCU enabled.
[    0.094629] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.094630] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.097075] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
[    0.097299] Console: colour dummy device 80x25
[    0.097303] printk: console [tty0] enabled
[    0.097317] ACPI: Core revision 20200110
[    0.097401] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.097416] APIC: Switch to symmetric I/O mode setup
[    0.097826] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.114083] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f79bc17026, max_idle_ns: 440795345781 ns
[    0.114087] Calibrating delay loop (skipped), value calculated using timer frequency.. 6589.69 BogoMIPS (lpj=10978713)
[    0.114089] pid_max: default: 32768 minimum: 301
[    0.114110] LSM: Security Framework initializing
[    0.114114] Yama: becoming mindful.
[    0.114140] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.114156] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.114167] *** VALIDATE tmpfs ***
[    0.114289] *** VALIDATE proc ***
[    0.114333] *** VALIDATE cgroup ***
[    0.114334] *** VALIDATE cgroup2 ***
[    0.114376] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.114384] process: using mwait in idle threads
[    0.114386] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.114386] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.114389] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.114390] Spectre V2 : Mitigation: Full generic retpoline
[    0.114390] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.114391] Speculative Store Bypass: Vulnerable
[    0.114394] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.114586] Freeing SMP alternatives memory: 32K
[    0.117481] TSC deadline timer enabled
[    0.117484] smpboot: CPU0: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.137430] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.137439] ... version:                3
[    0.137440] ... bit width:              48
[    0.137441] ... generic registers:      4
[    0.137443] ... value mask:             0000ffffffffffff
[    0.137443] ... max period:             00007fffffffffff
[    0.137444] ... fixed-purpose events:   3
[    0.137445] ... event mask:             000000070000000f
[    0.144090] rcu: Hierarchical SRCU implementation.
[    0.167530] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.174094] smp: Bringing up secondary CPUs ...
[    0.214114] x86: Booting SMP configuration:
[    0.214116] .... node  #0, CPUs:      #1 #2
[    0.256547] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.294111]  #3
[    0.296515] smp: Brought up 1 node, 4 CPUs
[    0.296515] smpboot: Max logical packages: 1
[    0.296515] smpboot: Total of 4 processors activated (26359.78 BogoMIPS)
[    0.297683] devtmpfs: initialized
[    0.297683] x86/mm: Memory block size: 128MB
[    0.298073] PM: Registering ACPI NVS region [mem 0xd9a85000-0xd9e24fff] (3801088 bytes)
[    0.298073] PM: Registering ACPI NVS region [mem 0xda4b0000-0xda4f2fff] (274432 bytes)
[    0.298073] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.298073] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.298073] pinctrl core: initialized pinctrl subsystem
[    0.298073] PM: RTC time: 05:07:05, date: 2020-04-17
[    0.298073] thermal_sys: Registered thermal governor 'fair_share'
[    0.298073] thermal_sys: Registered thermal governor 'bang_bang'
[    0.298073] thermal_sys: Registered thermal governor 'step_wise'
[    0.298073] thermal_sys: Registered thermal governor 'user_space'
[    0.298073] thermal_sys: Registered thermal governor 'power_allocator'
[    0.298073] NET: Registered protocol family 16
[    0.298073] audit: initializing netlink subsys (disabled)
[    0.298073] audit: type=2000 audit(1587100025.199:1): state=initialized audit_enabled=0 res=1
[    0.298073] cpuidle: using governor ladder
[    0.298073] cpuidle: using governor menu
[    0.298073] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.298073] ACPI: bus type PCI registered
[    0.298073] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.298073] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.298073] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.298073] PCI: Using configuration type 1 for base access
[    0.298073] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.298073] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.298240] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.300845] ACPI: Added _OSI(Module Device)
[    0.300846] ACPI: Added _OSI(Processor Device)
[    0.300847] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.300847] ACPI: Added _OSI(Processor Aggregator Device)
[    0.300848] ACPI: Added _OSI(Linux-Dell-Video)
[    0.300849] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.300850] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.306737] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.308088] ACPI: Dynamic OEM Table Load:
[    0.308093] ACPI: SSDT 0xFFFF9077548A9000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.308867] ACPI: Dynamic OEM Table Load:
[    0.308870] ACPI: SSDT 0xFFFF9077548B3400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.309465] ACPI: Dynamic OEM Table Load:
[    0.309468] ACPI: SSDT 0xFFFF9077549C7800 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.310758] ACPI: Interpreter enabled
[    0.310776] ACPI: (supports S0 S3 S4 S5)
[    0.310777] ACPI: Using IOAPIC for interrupt routing
[    0.310804] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.311036] ACPI: Enabled 15 GPEs in block 00 to 3F
[    0.318506] ACPI: Power Resource [FN00] (off)
[    0.318586] ACPI: Power Resource [FN01] (off)
[    0.318663] ACPI: Power Resource [FN02] (off)
[    0.318739] ACPI: Power Resource [FN03] (off)
[    0.318816] ACPI: Power Resource [FN04] (off)
[    0.319410] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.319415] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.319696] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.319872] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.319872] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.320410] PCI host bridge to bus 0000:00
[    0.320412] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.320413] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.320414] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.320415] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.320416] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.320417] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.320418] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.320418] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.320419] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.320420] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.320421] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.320430] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[    0.320526] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.320558] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.320657] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
[    0.320665] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.320669] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.320672] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.320808] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.320831] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[    0.320898] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.320994] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.321018] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b00f 64bit]
[    0.321089] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.321180] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.321201] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d18000-0xf7d183ff]
[    0.321280] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.321377] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.321396] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
[    0.321467] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.321571] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.321728] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.321854] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.322014] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.322136] pci 0000:00:1c.5: [8086:1e1a] type 01 class 0x060400
[    0.322225] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.322328] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.322349] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d17000-0xf7d173ff]
[    0.322429] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.322521] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.322660] pci 0000:00:1f.0: [8086:1e49] type 00 class 0x060100
[    0.322846] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[    0.322864] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.322871] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.322878] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.322885] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.322892] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.322899] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d16000-0xf7d167ff]
[    0.322938] pci 0000:00:1f.2: PME# supported from D3hot
[    0.323025] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.323043] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d15000-0xf7d150ff 64bit]
[    0.323061] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.323189] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.323256] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.323366] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[    0.323424] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c7ffff 64bit]
[    0.323506] pci 0000:03:00.0: reg 0x30: [mem 0xf7c80000-0xf7c8ffff pref]
[    0.323648] pci 0000:03:00.0: supports D1 D2
[    0.323649] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.323828] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.323833] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.323911] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.323946] pci 0000:04:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.323979] pci 0000:04:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.323999] pci 0000:04:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.324129] pci 0000:04:00.0: supports D1 D2
[    0.324130] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.324274] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.324278] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.324285] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.324302] pci_bus 0000:05: extended config space not accessible
[    0.324346] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.324354] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.324355] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.324356] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.324357] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.324357] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.324358] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.324359] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.324360] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.324361] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.324362] pci 0000:00:1e.0:   bridge window [mem 0xdfa00000-0xfeafffff window] (subtractive decode)
[    0.324855] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[    0.324916] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[    0.324976] ACPI: PCI Interrupt Link [LNKC] (IRQs *15)
[    0.325035] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[    0.325094] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 15) *0, disabled.
[    0.325153] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 15) *0, disabled.
[    0.325213] ACPI: PCI Interrupt Link [LNKG] (IRQs *4)
[    0.325273] ACPI: PCI Interrupt Link [LNKH] (IRQs *3)
[    0.327422] iommu: Default domain type: Translated 
[    0.327430] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.327430] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.327430] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.327430] vgaarb: loaded
[    0.327582] SCSI subsystem initialized
[    0.327596] libata version 3.00 loaded.
[    0.327596] ACPI: bus type USB registered
[    0.327596] usbcore: registered new interface driver usbfs
[    0.327596] usbcore: registered new interface driver hub
[    0.327596] usbcore: registered new device driver usb
[    0.327596] pps_core: LinuxPPS API ver. 1 registered
[    0.327596] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.327596] PTP clock support registered
[    0.327596] EDAC MC: Ver: 3.0.0
[    0.327596] PCI: Using ACPI for IRQ routing
[    0.328696] PCI: pci_cache_line_size set to 64 bytes
[    0.328696] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.328696] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.328696] e820: reserve RAM buffer [mem 0xd922b000-0xdbffffff]
[    0.328696] e820: reserve RAM buffer [mem 0xd9a85000-0xdbffffff]
[    0.328696] e820: reserve RAM buffer [mem 0xda4b0000-0xdbffffff]
[    0.328696] e820: reserve RAM buffer [mem 0xdad66000-0xdbffffff]
[    0.328696] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.328696] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
[    0.328696] NetLabel: Initializing
[    0.328696] NetLabel:  domain hash size = 128
[    0.328696] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.328696] NetLabel:  unlabeled traffic allowed by default
[    0.328696] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.328696] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.330752] clocksource: Switched to clocksource tsc-early
[    0.340719] *** VALIDATE bpf ***
[    0.340819] VFS: Disk quotas dquot_6.6.0
[    0.340835] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.340860] *** VALIDATE ramfs ***
[    0.340863] *** VALIDATE hugetlbfs ***
[    0.340900] pnp: PnP ACPI init
[    0.341018] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.341023] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.341112] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.341114] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.341115] system 00:01: [io  0xffff] has been reserved
[    0.341116] system 00:01: [io  0xffff] has been reserved
[    0.341117] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.341118] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.341120] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.341121] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.341124] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.341146] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.341199] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.341202] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.341345] system 00:04: [io  0x0a00-0x0a1f] has been reserved
[    0.341346] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.341347] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.341350] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.341425] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.341428] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.341673] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.341674] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.341675] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.341676] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.341677] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.341678] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.341679] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.341680] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.341681] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.341683] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.341684] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    0.341687] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.341867] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
[    0.341868] system 00:07: [mem 0x40004000-0x40004fff] has been reserved
[    0.341871] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.341891] pnp: PnP ACPI: found 8 devices
[    0.347437] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.347470] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.347475] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.347492] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.347498] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.347510] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.347513] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.347520] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.347525] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.347535] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.347536] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.347537] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.347538] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.347539] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.347540] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.347541] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.347542] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.347543] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.347543] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window]
[    0.347545] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.347546] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.347547] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.347548] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.347549] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.347550] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.347551] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.347551] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.347552] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.347553] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.347554] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.347555] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.347556] pci_bus 0000:05: resource 13 [mem 0xdfa00000-0xfeafffff window]
[    0.347652] NET: Registered protocol family 2
[    0.347767] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.347804] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.347930] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.348044] TCP: Hash tables configured (established 65536 bind 65536)
[    0.348087] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.348107] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.348182] NET: Registered protocol family 1
[    0.348187] NET: Registered protocol family 44
[    0.348207] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.367549] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x654 took 18684 usecs
[    0.390879] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x654 took 22765 usecs
[    0.390900] pci 0000:03:00.0: CLS mismatch (64 != 32), using 64 bytes
[    0.390940] Trying to unpack rootfs image as initramfs...
[    0.601959] Freeing initrd memory: 17780K
[    0.601967] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.601968] software IO TLB: mapped [mem 0xd522b000-0xd922b000] (64MB)
[    0.602091] check: Scanning for low memory corruption every 60 seconds
[    0.602372] Initialise system trusted keyrings
[    0.602380] Key type blacklist registered
[    0.602425] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.603369] zbud: loaded
[    0.607687] Key type asymmetric registered
[    0.607689] Asymmetric key parser 'x509' registered
[    0.607701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.607738] io scheduler mq-deadline registered
[    0.607739] io scheduler kyber registered
[    0.607766] io scheduler bfq registered
[    0.608585] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.608640] vesafb: mode is 1680x1050x32, linelength=6720, pages=0
[    0.608640] vesafb: scrolling: redraw
[    0.608642] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.608654] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 6912k, total 6912k
[    0.608690] fbcon: Deferring console take-over
[    0.608691] fb0: VESA VGA frame buffer device
[    0.608701] intel_idle: MWAIT substates: 0x1120
[    0.608701] intel_idle: v0.4.1 model 0x3A
[    0.608816] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.608879] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.608910] ACPI: Power Button [PWRB]
[    0.608939] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.608958] ACPI: Power Button [PWRF]
[    0.609599] thermal LNXTHERM:00: registered as thermal_zone0
[    0.609600] ACPI: Thermal Zone [TZ00] (28 C)
[    0.609852] thermal LNXTHERM:01: registered as thermal_zone1
[    0.609853] ACPI: Thermal Zone [TZ01] (30 C)
[    0.610005] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.610482] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.610483] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    0.610881] ahci 0000:00:1f.2: version 3.0
[    0.611036] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    0.611038] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.621272] scsi host0: ahci
[    0.621463] scsi host1: ahci
[    0.621547] scsi host2: ahci
[    0.621612] scsi host3: ahci
[    0.621676] scsi host4: ahci
[    0.621737] scsi host5: ahci
[    0.621766] ata1: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16100 irq 28
[    0.621768] ata2: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16180 irq 28
[    0.621769] ata3: DUMMY
[    0.621769] ata4: DUMMY
[    0.621770] ata5: DUMMY
[    0.621770] ata6: DUMMY
[    0.621813] usbcore: registered new interface driver usbserial_generic
[    0.621818] usbserial: USB Serial support registered for generic
[    0.621836] rtc_cmos 00:02: RTC can wake from S4
[    0.622031] rtc_cmos 00:02: registered as rtc0
[    0.622047] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.622091] intel_pstate: Intel P-state driver initializing
[    0.622234] ledtrig-cpu: registered to indicate activity on CPUs
[    0.622322] drop_monitor: Initializing network drop monitor service
[    0.622573] NET: Registered protocol family 10
[    0.633568] Segment Routing with IPv6
[    0.633613] NET: Registered protocol family 17
[    0.633955] RAS: Correctable Errors collector initialized.
[    0.634017] microcode: sig=0x306a9, pf=0x2, revision=0x15
[    0.634108] microcode: Microcode Update Driver: v2.2.
[    0.634114] IPI shorthand broadcast: enabled
[    0.634128] sched_clock: Marking stable (633931396, 159022)->(635757568, -1667150)
[    0.634296] registered taskstats version 1
[    0.634308] Loading compiled-in X.509 certificates
[    0.640753] Loaded X.509 cert 'Build time autogenerated kernel key: 5fedf10500f4f89274a72136ae4d94a39b20e616'
[    0.640831] zswap: loaded using pool lzo/zbud
[    0.641165] Key type ._fscrypt registered
[    0.641166] Key type .fscrypt registered
[    0.641168] Key type fscrypt-provisioning registered
[    0.651961] Key type big_key registered
[    0.652501] PM:   Magic number: 0:856:112
[    0.652626] rtc_cmos 00:02: setting system clock to 2020-04-17T05:07:05 UTC (1587100025)
[    0.937473] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.937499] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.938480] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.938483] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.938486] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.938893] ata1.00: NCQ Send/Recv Log not supported
[    0.938896] ata1.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
[    0.938898] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.940182] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.940187] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.940191] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.940201] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.940203] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.940206] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.940403] ata1.00: NCQ Send/Recv Log not supported
[    0.940470] ata1.00: configured for UDMA/133
[    0.940610] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  7B0Q PQ: 0 ANSI: 5
[    0.940690] ata2.00: NCQ Send/Recv Log not supported
[    0.940693] ata2.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB0Q, max UDMA/133
[    0.940695] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.940925] ata1.00: Enabling discard_zeroes_data
[    0.941013] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    0.941028] sd 0:0:0:0: [sda] Write Protect is off
[    0.941030] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.941055] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.941252] ata1.00: Enabling discard_zeroes_data
[    0.941282] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.941285] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.941287] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.941724] ata2.00: NCQ Send/Recv Log not supported
[    0.941728] ata2.00: configured for UDMA/133
[    0.941906] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 840  BB0Q PQ: 0 ANSI: 5
[    0.942256] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    0.942271] sd 1:0:0:0: [sdb] Write Protect is off
[    0.942273] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.942298] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.943144]  sda: sda1 sda2 sda3 sda4
[    0.943551] ata1.00: Enabling discard_zeroes_data
[    0.943694] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.949700]  sdb: sdb1
[    0.950130] sd 1:0:0:0: [sdb] Attached SCSI disk
[    0.951713] Freeing unused decrypted memory: 2040K
[    0.952137] Freeing unused kernel image (initmem) memory: 1620K
[    0.967467] Write protecting the kernel read-only data: 20480k
[    0.968240] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    0.968716] Freeing unused kernel image (rodata/data gap) memory: 1644K
[    1.006061] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.006062] x86/mm: Checking user space page tables
[    1.034704] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.034706] Run /init as init process
[    1.034708]   with arguments:
[    1.034708]     /init
[    1.034709]   with environment:
[    1.034709]     HOME=/
[    1.034710]     TERM=linux
[    1.034710]     BOOT_IMAGE=/vmlinuz-linux
[    1.041463] fbcon: Taking over console
[    1.041527] Console: switching to colour frame buffer device 210x65
[    1.213376] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.215957] ehci-pci: EHCI PCI platform driver
[    1.216157] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.216164] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.216177] ehci-pci 0000:00:1a.0: debug port 2
[    1.220085] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.220104] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d18000
[    1.230772] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.231020] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    1.231022] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.231024] usb usb1: Product: EHCI Host Controller
[    1.231025] usb usb1: Manufacturer: Linux 5.6.3-arch1-1 ehci_hcd
[    1.231027] usb usb1: SerialNumber: 0000:00:1a.0
[    1.231667] hub 1-0:1.0: USB hub found
[    1.231678] hub 1-0:1.0: 2 ports detected
[    1.232396] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.232405] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.235258] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[    1.235267] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.235427] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    1.235428] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.235429] usb usb2: Product: xHCI Host Controller
[    1.235430] usb usb2: Manufacturer: Linux 5.6.3-arch1-1 xhci-hcd
[    1.235431] usb usb2: SerialNumber: 0000:00:14.0
[    1.235553] hub 2-0:1.0: USB hub found
[    1.235562] hub 2-0:1.0: 4 ports detected
[    1.236024] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.236031] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    1.236049] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.236050] ehci-pci 0000:00:1d.0: debug port 2
[    1.236053] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.236056] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.236097] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[    1.236099] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.236099] usb usb4: Product: xHCI Host Controller
[    1.236100] usb usb4: Manufacturer: Linux 5.6.3-arch1-1 xhci-hcd
[    1.236101] usb usb4: SerialNumber: 0000:00:14.0
[    1.236185] hub 4-0:1.0: USB hub found
[    1.236195] hub 4-0:1.0: 4 ports detected
[    1.239977] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.239992] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d17000
[    1.250825] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.250883] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    1.250884] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.250885] usb usb3: Product: EHCI Host Controller
[    1.250887] usb usb3: Manufacturer: Linux 5.6.3-arch1-1 ehci_hcd
[    1.250887] usb usb3: SerialNumber: 0000:00:1d.0
[    1.251046] hub 3-0:1.0: USB hub found
[    1.251055] hub 3-0:1.0: 2 ports detected
[    1.482309] random: fast init done
[    1.560789] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.564113] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[    1.587474] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.587913] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.587915] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.588202] hub 1-1:1.0: USB hub found
[    1.588263] hub 1-1:1.0: 6 ports detected
[    1.603285] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    1.611283] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    1.611285] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.611553] hub 3-1:1.0: USB hub found
[    1.612013] hub 3-1:1.0: 6 ports detected
[    1.617455] tsc: Refined TSC clocksource calibration: 3293.591 MHz
[    1.617464] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f79a6143c3, max_idle_ns: 440795338772 ns
[    1.617490] clocksource: Switched to clocksource tsc
[    1.734165] systemd[1]: systemd 245.4-2-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    1.750969] systemd[1]: Detected architecture x86-64.
[    1.776539] systemd[1]: Set hostname to <arch>.
[    1.837450] usb 2-1: New USB device found, idVendor=0bda, idProduct=0158, bcdDevice=58.88
[    1.837454] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.837456] usb 2-1: Product: USB2.0-CRW
[    1.837458] usb 2-1: Manufacturer: Generic
[    1.837460] usb 2-1: SerialNumber: 20071114173400000
[    1.867436] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[    1.907679] random: systemd: uninitialized urandom read (16 bytes read)
[    1.908403] systemd[1]: Created slice system-getty.slice.
[    1.908932] random: systemd: uninitialized urandom read (16 bytes read)
[    1.909121] systemd[1]: Created slice system-modprobe.slice.
[    1.909622] random: systemd: uninitialized urandom read (16 bytes read)
[    1.909799] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    1.910581] systemd[1]: Created slice User and Session Slice.
[    1.911143] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.911868] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.912672] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.913509] systemd[1]: Reached target Local Encrypted Volumes.
[    1.914031] systemd[1]: Reached target Login Prompts.
[    1.914499] systemd[1]: Reached target Paths.
[    1.914889] systemd[1]: Reached target Remote File Systems.
[    1.915377] systemd[1]: Reached target Slices.
[    1.915835] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.916632] systemd[1]: Listening on LVM2 metadata daemon socket.
[    1.917171] systemd[1]: Listening on LVM2 poll daemon socket.
[    1.918781] systemd[1]: Listening on Process Core Dump Socket.
[    1.919279] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    1.919894] systemd[1]: Listening on Journal Audit Socket.
[    1.920390] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.920929] systemd[1]: Listening on Journal Socket.
[    1.921386] systemd[1]: Listening on udev Control Socket.
[    1.921852] systemd[1]: Listening on udev Kernel Socket.
[    1.922946] systemd[1]: Mounting Huge Pages File System...
[    1.924112] systemd[1]: Mounting POSIX Message Queue File System...
[    1.925684] systemd[1]: Mounting Kernel Debug File System...
[    1.926879] systemd[1]: Mounting Kernel Trace File System...
[    1.928203] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    1.929679] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    1.931368] systemd[1]: Starting Load Kernel Module drm...
[    1.932247] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    1.932292] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    1.933841] systemd[1]: Starting Journal Service...
[    1.936145] systemd[1]: Starting Load Kernel Modules...
[    1.937401] systemd[1]: Starting Remount Root and Kernel File Systems...
[    1.938786] systemd[1]: Starting udev Coldplug all Devices...
[    1.940270] Linux agpgart interface v0.103
[    1.941067] systemd[1]: Mounted Huge Pages File System.
[    1.941682] systemd[1]: Mounted POSIX Message Queue File System.
[    1.942341] systemd[1]: Mounted Kernel Debug File System.
[    1.942951] systemd[1]: Mounted Kernel Trace File System.
[    1.944037] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    1.952511] systemd[1]: Started LVM2 metadata daemon.
[    1.956172] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[    1.957983] systemd[1]: Finished Remount Root and Kernel File Systems.
[    1.958691] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    1.959661] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    1.960674] systemd[1]: Starting Load/Save Random Seed...
[    1.961165] systemd[1]: Condition check resulted in Create System Users being skipped.
[    1.962258] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.976751] vboxdrv: loading out-of-tree module taints kernel.
[    1.976981] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    1.980036] usb 1-1.1: New USB device found, idVendor=046a, idProduct=010d, bcdDevice= 1.00
[    1.980038] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.980690] vboxdrv: Found 4 processor cores
[    2.004781] systemd[1]: modprobe@drm.service: Succeeded.
[    2.005200] systemd[1]: Finished Load Kernel Module drm.
[    2.007599] vboxdrv: TSC mode is Invariant, tentative frequency 3293591573 Hz
[    2.007600] vboxdrv: Successfully loaded version 6.1.4 (interface 0x002d0001)
[    2.013719] systemd[1]: Finished udev Coldplug all Devices.
[    2.054108] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[    2.153027] usb 1-1.2: New USB device found, idVendor=22d4, idProduct=1316, bcdDevice= 1.89
[    2.153028] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.153029] usb 1-1.2: Product: Mionix Castor
[    2.153030] usb 1-1.2: Manufacturer: Laview Technology
[    2.153031] usb 1-1.2: SerialNumber: STM32
[    2.162713] VBoxNetAdp: Successfully started.
[    2.171815] VBoxNetFlt: Successfully started.
[    2.173021] systemd[1]: Finished Load Kernel Modules.
[    2.173828] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[    2.174903] systemd[1]: Mounting Kernel Configuration File System...
[    2.176604] systemd[1]: Starting Apply Kernel Variables...
[    2.178510] systemd[1]: Mounted Kernel Configuration File System.
[    2.200118] systemd[1]: Finished Apply Kernel Variables.
[    2.217294] audit: type=1130 audit(1587100027.058:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.217752] systemd[1]: Finished Create Static Device Nodes in /dev.
[    2.227518] usb 1-1.3: new high-speed USB device number 5 using ehci-pci
[    2.233540] audit: type=1130 audit(1587100027.074:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.233666] systemd[1]: Started Journal Service.
[    2.249209] audit: type=1130 audit(1587100027.091:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.252010] usb 1-1.3: New USB device found, idVendor=1058, idProduct=10a8, bcdDevice=10.42
[    2.252012] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.252013] usb 1-1.3: Product: Elements 10A8
[    2.252014] usb 1-1.3: Manufacturer: Western Digital
[    2.252015] usb 1-1.3: SerialNumber: 57583331453733594B4C3533
[    2.265791] systemd-journald[285]: Received client request to flush runtime journal.
[    2.267223] audit: type=1334 audit(1587100027.108:5): prog-id=5 op=LOAD
[    2.267256] audit: type=1334 audit(1587100027.108:6): prog-id=6 op=LOAD
[    2.324103] usb 1-1.4: new full-speed USB device number 6 using ehci-pci
[    2.397435] usb 1-1.4: device descriptor read/64, error -32
[    2.618816] usb 1-1.4: New USB device found, idVendor=0b0e, idProduct=2321, bcdDevice= 1.08
[    2.618821] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.618824] usb 1-1.4: Product: Jabra BIZ 2400 II CC
[    2.618827] usb 1-1.4: Manufacturer: GN Netcom A/S
[    2.618829] usb 1-1.4: SerialNumber: 00004F9AA66B07
[    2.798135] audit: type=1130 audit(1587100027.641:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.898087] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    2.904305] EDAC ie31200: No ECC support
[    2.932124] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200110/utaddress-204)
[    2.932130] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.932133] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
[    2.932137] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.932138] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
[    2.932141] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.932142] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200110/utaddress-204)
[    2.932145] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.932146] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.932946] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    3.080175] audit: type=1130 audit(1587100027.921:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.103061] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    3.103063] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    3.103064] RAPL PMU: hw unit of domain package 2^-16 Joules
[    3.103064] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    3.104174] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    3.105703] hid: raw HID events driver (C) Jiri Kosina
[    3.117434] scsi host6: usb-storage 1-1.3:1.0
[    3.117558] usbcore: registered new interface driver usb-storage
[    3.185058] Adding 4194300k swap on /dev/sda4.  Priority:-2 extents:1 across:4194300k SSFS
[    3.232479] usbcore: registered new interface driver usbhid
[    3.232481] usbhid: USB HID core driver
[    3.270795] audit: type=1130 audit(1587100028.114:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.271622] iTCO_vendor_support: vendor-support=0
[    3.271897] usbcore: registered new interface driver uas
[    3.351815] ums-realtek 2-1:1.0: USB Mass Storage device detected
[    3.355972] cryptd: max_cpu_qlen set to 1000
[    3.388731] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.388843] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.388892] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    3.389018] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.401571] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.404762] libphy: r8169: probed
[    3.404979] scsi host7: usb-storage 2-1:1.0
[    3.405077] r8169 0000:04:00.0 eth0: RTL8168evl/8111evl, a4:1f:72:60:ed:c0, XID 2c9, IRQ 31
[    3.405079] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.405082] usbcore: registered new interface driver ums-realtek
[    3.409620] audit: type=1130 audit(1587100028.251:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-85d2964f\x2d3dda\x2d4330\x2da84a\x2d7a7cb8572c69 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.427877] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.428546] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.428548] cfg80211: failed to load regulatory.db
[    3.457929] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[    3.461228] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[    3.461237] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[    3.465804] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    3.471341] input: HID 046a:010d as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046A:010D.0001/input/input3
[    3.473535] mc: Linux media interface: v0.10
[    3.513791] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    3.534128] hid-generic 0003:046A:010D.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:010d] on usb-0000:00:1a.0-1.1/input0
[    3.534306] input: HID 046a:010d as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046A:010D.0002/input/input4
[    3.591321] hid-generic 0003:046A:010D.0002: input,hidraw1: USB HID v1.11 Device [HID 046a:010d] on usb-0000:00:1a.0-1.1/input1
[    3.591467] input: Laview Technology Mionix Castor as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:22D4:1316.0003/input/input5
[    3.591535] hid-generic 0003:22D4:1316.0003: input,hidraw2: USB HID v1.00 Mouse [Laview Technology Mionix Castor] on usb-0000:00:1a.0-1.2/input0
[    3.591671] input: Laview Technology Mionix Castor Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:22D4:1316.0004/input/input6
[    3.642879] usb 1-1.4: 1:1: cannot get freq at ep 0x83
[    3.644628] usb 1-1.4: 2:1: cannot get freq at ep 0x4
[    3.653082] hid-generic 0003:22D4:1316.0004: input,hiddev0,hidraw3: USB HID v1.00 Keyboard [Laview Technology Mionix Castor] on usb-0000:00:1a.0-1.2/input1
[    3.693326] usbcore: registered new interface driver snd-usb-audio
[    3.714553] mousedev: PS/2 mouse device common for all mice
[    3.716794] checking generic (e0000000 6c0000) vs hw (f7800000 400000)
[    3.716796] checking generic (e0000000 6c0000) vs hw (e0000000 10000000)
[    3.716797] fb0: switching to inteldrmfb from VESA VGA
[    3.736175] input: GN Netcom A/S Jabra BIZ 2400 II CC as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.3/0003:0B0E:2321.0005/input/input7
[    3.749014] Console: switching to colour dummy device 80x25
[    3.749082] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.749877] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.749878] [drm] Driver supports precise vblank timestamp query.
[    3.750675] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.770333] [drm] Initialized i915 1.6.0 20200114 for 0000:00:02.0 on minor 0
[    3.771313] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.771573] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    3.774994] ath: phy0: ASPM enabled: 0x43
[    3.774997] ath: EEPROM regdomain: 0x60
[    3.774997] ath: EEPROM indicates we should expect a direct regpair map
[    3.774999] ath: Country alpha2 being used: 00
[    3.775000] ath: Regpair used: 0x60
[    3.791107] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.791148] jabra 0003:0B0E:2321.0005: input,hiddev1,hidraw4: USB HID v1.00 Device [GN Netcom A/S Jabra BIZ 2400 II CC] on usb-0000:00:1a.0-1.4/input3
[    3.791696] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    3.792324] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffad92c0680000, irq=18
[    3.802499] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[    3.818115] fbcon: i915drmfb (fb0) is primary device
[    3.854472] snd_hda_codec_realtek hdaudioC0D2: ALC662 rev3: SKU not ready 0x411111f0
[    3.854825] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    3.854827] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.854829] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    3.854830] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    3.854831] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    3.854834] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x19
[    3.854835] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x18
[    3.854837] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    3.882994] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    3.883061] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    3.883118] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    3.883175] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    3.883235] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    3.883292] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    3.883352] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    3.919541] Console: switching to colour frame buffer device 210x65
[    3.940529] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    4.002718] intel_rapl_common: Found RAPL domain package
[    4.002720] intel_rapl_common: Found RAPL domain core
[    4.002721] intel_rapl_common: Found RAPL domain uncore
[    4.002726] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[    4.114095] random: crng init done
[    4.114096] random: 7 urandom warning(s) missed due to ratelimiting
[    4.124659] scsi 6:0:0:0: Direct-Access     WD       Elements 10A8    1042 PQ: 0 ANSI: 6
[    4.126712] sd 6:0:0:0: [sdc] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
[    4.128218] sd 6:0:0:0: [sdc] Write Protect is off
[    4.128221] sd 6:0:0:0: [sdc] Mode Sense: 53 00 10 08
[    4.129254] sd 6:0:0:0: [sdc] No Caching mode page found
[    4.129277] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    4.145641]  sdc: sdc1
[    4.157022] sd 6:0:0:0: [sdc] Attached SCSI disk
[    4.210113] 8021q: 802.1Q VLAN Support v1.8
[    4.263701] RTL8211E Gigabit Ethernet r8169-400:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
[    4.419648] scsi 7:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    4.446249] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[    4.462143] r8169 0000:04:00.0 enp4s0: Link is Down
[    5.799964] kauditd_printk_skb: 25 callbacks suppressed
[    5.799968] audit: type=1103 audit(1587100030.644:36): pid=617 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[    5.850434] audit: type=1130 audit(1587100030.691:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.889391] audit: type=1101 audit(1587100030.731:38): pid=621 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.889514] audit: type=1103 audit(1587100030.731:39): pid=621 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[    5.889661] audit: type=1006 audit(1587100030.731:40): pid=621 uid=0 old-auid=4294967295 auid=620 tty=(none) old-ses=4294967295 ses=1 res=1
[    5.892368] audit: type=1105 audit(1587100030.734:41): pid=621 uid=0 auid=620 ses=1 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.901834] audit: type=1334 audit(1587100030.744:42): prog-id=11 op=LOAD
[    5.901839] audit: type=1334 audit(1587100030.744:43): prog-id=11 op=UNLOAD
[    6.076206] audit: type=1130 audit(1587100030.918:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.090170] audit: type=1105 audit(1587100030.931:45): pid=617 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_unix,pam_systemd acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[    6.466245] fuse: init (API version 7.31)
[    6.466271] *** VALIDATE fuseblk ***
[    6.466275] *** VALIDATE fuse ***
[   12.186475] kauditd_printk_skb: 3 callbacks suppressed
[   12.186478] audit: type=1100 audit(1587100037.028:49): pid=661 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_tally2,pam_shells,pam_unix,pam_permit acct="chris" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[   12.195829] audit: type=1101 audit(1587100037.038:50): pid=661 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="chris" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[   12.232804] audit: type=1106 audit(1587100037.074:51): pid=617 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_unix,pam_systemd acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[   12.232890] audit: type=1104 audit(1587100037.074:52): pid=617 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[   12.241395] audit: type=1103 audit(1587100037.084:53): pid=661 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_tally2,pam_shells,pam_unix,pam_permit acct="chris" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[   12.241487] audit: type=1006 audit(1587100037.084:54): pid=661 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   12.261615] audit: type=1130 audit(1587100037.104:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.270434] audit: type=1101 audit(1587100037.111:56): pid=671 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="chris" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.271071] audit: type=1103 audit(1587100037.114:57): pid=671 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="chris" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   12.271194] audit: type=1006 audit(1587100037.114:58): pid=671 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   13.428665] wlp3s0: authenticate with ac:22:05:b4:a5:72
[   13.456713] wlp3s0: send auth to ac:22:05:b4:a5:72 (try 1/3)
[   13.459824] wlp3s0: authenticated
[   13.459979] wlp3s0: associating with AP with corrupt probe response
[   13.460782] wlp3s0: associate with ac:22:05:b4:a5:72 (try 1/3)
[   13.478333] wlp3s0: RX AssocResp from ac:22:05:b4:a5:72 (capab=0x431 status=0 aid=2)
[   13.478488] wlp3s0: associated
[   13.556959] usb 1-1.4: 1:1: cannot get freq at ep 0x83
[   13.675906] usb 1-1.4: cannot submit urb 0, error -28: not enough bandwidth
[   13.737808] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   22.513578] kauditd_printk_skb: 14 callbacks suppressed
[   22.513579] audit: type=1131 audit(1587100047.354:73): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.523840] audit: type=1131 audit(1587100047.364:74): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   25.012927] audit: type=1131 audit(1587100049.854:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   34.780808] audit: type=1131 audit(1587100059.624:76): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   34.874789] audit: type=1334 audit(1587100059.718:77): prog-id=10 op=UNLOAD
[   34.874798] audit: type=1334 audit(1587100059.718:78): prog-id=9 op=UNLOAD

Ja, ich habe unter pavucontrol die Regler hoch gedreht. Auch wenn ich unter pavucontrol sowie unter alsamixer mute, dann leuchtet die am Headset die hängende Fernsteuerung am Knopf Mikrofon rot. Also scheint auf jeden Fall das Headset erkannt zu werden. Ich wollte es in Discord nutzen, da habe ich es unter Einstellungen auch ausgewählt. Aber da kommt ebenso kein Ton aus dem Mikro an.
Danke

Offline

#4 18.04.2020 16:51:05

Zeke
Mitglied

Re: USB Microfon geht nicht

Kurzes Update, also ich hab jetzt ein anderes Headset ausprobiert (Sennheiser) und das klappt einwandfrei.

Offline

#5 18.04.2020 19:02:50

Greg
Mitglied

Re: USB Microfon geht nicht

Hast du die Möglichkeit den Jabra wo Anders zu testen?
Am Sonsten wenn das Sennheiser funktioniert und das Jabrateil nicht, trotz richtig eingestellten pavucontrol Reglern, dann ist es defekt.

Offline

#6 18.04.2020 20:52:19

Zeke
Mitglied

Re: USB Microfon geht nicht

Jabra funktioniert am Windows Laptop (Arbeit).

Offline

Schnellantwort auf dieses Thema

Schreibe deinen Beitrag und versende ihn
Deine Antwort

Fußzeile des Forums