#1 17.05.2019 12:08:39

AVRDriver
Mitglied

Tonausgabeprobleme

Hallo,

ich habe nun seit etwa 2 Wochen Linux auf meinem Laptop installiert und es läuft eigentlich tadellos. Plötzlich hat aber die Tonausgabe aufgehört zu funktionieren.
Nicht nur der Lautsprecher sondern auch der Kopfhöreranschluss geben keinen Ton von sich.

Das Problem tritt aber nicht immer auf: Manchmal nach einem Boot geht es manchmal nicht. Eine Regelmäßigkeit habe ich nicht feststellen können.
Wenn ich also hochfahre mach ich den Ton lauter oder leiser und höre das typische "Blob" Geräusch, soweit ganz normal. Aber nach 1-2 Sekunden wird das Geräusch "tiefer" und dann ist es ganz weg und keinerlei Ton geht mehr.

Jetzt wird es ganz verrückt: Ich habe auf einen USB Stick Manjaro Linux gespielt und bin in den Live Modus gestartet. Da geht der Ton auch nicht.

Unter Windows gibt es da keine Probleme.

Was soll ich ausprobieren oder woher kann so ein Problem kommen?

Gruß

Offline

#2 17.05.2019 12:48:26

schard
Moderator

Re: Tonausgabeprobleme

Welches Soundsystem benutzt du? ALSA? Pulseaudio?
Was sagen das Journal und dmesg?

Offline

#3 17.05.2019 13:34:47

AVRDriver
Mitglied

Re: Tonausgabeprobleme

Hallo,
danke für die schnelle Antwort.

Soundsystem ist Pulseaudio.

Zu Journal und dmesg weiß ich leider nicht worauf ich achten muss. Hab noch nicht so viel Erfahrung mit Linux.

Oder soll ich die Zeilen einfach Mal rein posten?

Gruß

Offline

#4 17.05.2019 14:10:59

schard
Moderator

Re: Tonausgabeprobleme

AVRDriver schrieb:

Oder soll ich die Zeilen einfach Mal rein posten?

Genau das.
Aber bitte in code-tags.

Offline

#5 17.05.2019 14:40:33

AVRDriver
Mitglied

Re: Tonausgabeprobleme

Journal konnte ich nicht reinkopieren weil die Ausgabe 20Mib groß ist. Also hab ich es grade auf meinen Webserver gezogen: http://avrdevelopers.ddns.net/journal.txt

dmesg:

[    0.000000] microcode: microcode updated early to revision 0x9e, date = 2018-10-18
[    0.000000] Linux version 4.19.36-1-MANJARO (builduser@lancaster) (gcc version 8.3.0 (GCC)) #1 SMP PREEMPT Sat Apr 20 22:05:46 UTC 2019
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19-x86_64 root=UUID=15aca89c-b0e6-4be8-9678-226d552dcf27 rw nouveau.modeset=0 quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000081b83fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000081b84000-0x0000000081b84fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000081b85000-0x0000000081b85fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000081b86000-0x0000000087cd0fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000087cd1000-0x0000000089d76fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000089d77000-0x0000000089dc3fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000089dc4000-0x000000008a21bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008a21c000-0x000000008a6a9fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008a6aa000-0x000000008a77efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000008a77f000-0x000000008a7fefff] usable
[    0.000000] BIOS-e820: [mem 0x000000008a7ff000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x89d86000  ACPI=0x89d86000  SMBIOS=0x8a608000  SMBIOS 3.0=0x8a607000  ESRT=0x85f18a18 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. UX331UN/UX331UN, BIOS UX331UN.307 07/16/2018
[    0.000000] tsc: Detected 1800.000 MHz processor
[    0.000000] [Firmware Bug]: TSC ADJUST: CPU0: -577118878 force to 0
[    0.001721] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001723] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001731] last_pfn = 0x26f000 max_arch_pfn = 0x400000000
[    0.001737] MTRR default type: write-back
[    0.001738] MTRR fixed ranges enabled:
[    0.001739]   00000-9FFFF write-back
[    0.001740]   A0000-BFFFF uncachable
[    0.001741]   C0000-FFFFF write-protect
[    0.001741] MTRR variable ranges enabled:
[    0.001743]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.001744]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.001745]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.001745]   3 base 008C000000 mask 7FFC000000 uncachable
[    0.001746]   4 base 008B800000 mask 7FFF800000 uncachable
[    0.001747]   5 disabled
[    0.001747]   6 disabled
[    0.001748]   7 disabled
[    0.001748]   8 disabled
[    0.001749]   9 disabled
[    0.002854] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003179] last_pfn = 0x8a7ff max_arch_pfn = 0x400000000
[    0.015989] esrt: Reserving ESRT space from 0x0000000085f18a18 to 0x0000000085f18a50.
[    0.016000] Scanning 1 areas for low memory corruption
[    0.016002] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.016006] Using GB pages for direct mapping
[    0.016008] BRK [0x12ec01000, 0x12ec01fff] PGTABLE
[    0.016010] BRK [0x12ec02000, 0x12ec02fff] PGTABLE
[    0.016010] BRK [0x12ec03000, 0x12ec03fff] PGTABLE
[    0.016047] BRK [0x12ec04000, 0x12ec04fff] PGTABLE
[    0.016049] BRK [0x12ec05000, 0x12ec05fff] PGTABLE
[    0.016238] BRK [0x12ec06000, 0x12ec06fff] PGTABLE
[    0.016284] BRK [0x12ec07000, 0x12ec07fff] PGTABLE
[    0.016424] BRK [0x12ec08000, 0x12ec08fff] PGTABLE
[    0.016485] BRK [0x12ec09000, 0x12ec09fff] PGTABLE
[    0.016555] Secure boot could not be determined
[    0.016556] RAMDISK: [mem 0x36b1b000-0x37584fff]
[    0.016564] ACPI: Early table checksum verification disabled
[    0.016567] ACPI: RSDP 0x0000000089D86000 000024 (v02 _ASUS_)
[    0.016571] ACPI: XSDT 0x0000000089D860C0 0000FC (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.016577] ACPI: FACP 0x0000000089DB2720 000114 (v06 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.016582] ACPI: DSDT 0x0000000089D86248 02C4D4 (v02 _ASUS_ Notebook 01072009 INTL 20160422)
[    0.016585] ACPI: FACS 0x000000008A1EAF00 000040
[    0.016588] ACPI: APIC 0x0000000089DB2838 0000BC (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.016590] ACPI: FPDT 0x0000000089DB28F8 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.016593] ACPI: FIDT 0x0000000089DB2940 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.016596] ACPI: ECDT 0x0000000089DB29E0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.016598] ACPI: MCFG 0x0000000089DB2AA8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[    0.016601] ACPI: SSDT 0x0000000089DB2AE8 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.016604] ACPI: SSDT 0x0000000089DB2E48 0087DA (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[    0.016610] ACPI: MSDM 0x0000000089DBB628 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[    0.016616] ACPI: SSDT 0x0000000089DBB680 003156 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.016624] ACPI: HPET 0x0000000089DBE7D8 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
[    0.016627] ACPI: SSDT 0x0000000089DBE810 000024 (v02 INTEL  OEM_RTD3 00001000 INTL 20160422)
[    0.016630] ACPI: UEFI 0x0000000089DBE838 000042 (v01 _ASUS_ Notebook 00000002      01000013)
[    0.016632] ACPI: SSDT 0x0000000089DBE880 0017AE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.016635] ACPI: LPIT 0x0000000089DC0030 000094 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
[    0.016638] ACPI: SSDT 0x0000000089DC00C8 000141 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[    0.016640] ACPI: SSDT 0x0000000089DC0210 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.016643] ACPI: SSDT 0x0000000089DC04B0 000517 (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[    0.016646] ACPI: DBGP 0x0000000089DC09C8 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.016649] ACPI: DBG2 0x0000000089DC0A00 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.016651] ACPI: SSDT 0x0000000089DC0A58 000929 (v02 SgRef  SgPch    00001000 INTL 20160422)
[    0.016654] ACPI: SSDT 0x0000000089DC1388 00039B (v02 SgRef  SgUlx    00001000 INTL 20160422)
[    0.016657] ACPI: DMAR 0x0000000089DC1728 000138 (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.016660] ACPI: BGRT 0x0000000089DC1860 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.016662] ACPI: TPM2 0x0000000089DC1898 000034 (v03 _ASUS_ Notebook 00000001 AMI  00000000)
[    0.016665] ACPI: SSDT 0x0000000089DC18D0 001F39 (v01 OptRef OptTabl  00001000 INTL 20160422)
[    0.016668] ACPI: WSMT 0x0000000089DC3810 000028 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.016676] ACPI: Local APIC address 0xfee00000
[    0.016858] No NUMA configuration found
[    0.016860] Faking a node at [mem 0x0000000000000000-0x000000026effffff]
[    0.016862] NODE_DATA(0) allocated [mem 0x26effc000-0x26effffff]
[    0.016881] Zone ranges:
[    0.016882]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.016884]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.016885]   Normal   [mem 0x0000000100000000-0x000000026effffff]
[    0.016886]   Device   empty
[    0.016887] Movable zone start for each node
[    0.016888] Early memory node ranges
[    0.016888]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.016889]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.016890]   node   0: [mem 0x0000000000100000-0x0000000081b83fff]
[    0.016890]   node   0: [mem 0x0000000081b86000-0x0000000087cd0fff]
[    0.016891]   node   0: [mem 0x000000008a77f000-0x000000008a7fefff]
[    0.016892]   node   0: [mem 0x0000000100000000-0x000000026effffff]
[    0.016894] Reserved but unavailable: 98 pages
[    0.016895] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
[    0.016897] On node 0 totalpages: 2059499
[    0.016898]   DMA zone: 64 pages used for memmap
[    0.016898]   DMA zone: 23 pages reserved
[    0.016899]   DMA zone: 3996 pages, LIFO batch:0
[    0.016979]   DMA32 zone: 8630 pages used for memmap
[    0.016980]   DMA32 zone: 552271 pages, LIFO batch:63
[    0.029690]   Normal zone: 23488 pages used for memmap
[    0.029691]   Normal zone: 1503232 pages, LIFO batch:63
[    0.059095] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff]
[    0.059384] ACPI: PM-Timer IO Port: 0x1808
[    0.059386] ACPI: Local APIC address 0xfee00000
[    0.059392] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.059393] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.059393] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.059394] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.059394] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.059395] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.059395] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.059396] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.059424] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.059425] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.059427] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.059428] ACPI: IRQ0 used by override.
[    0.059429] ACPI: IRQ9 used by override.
[    0.059430] Using ACPI (MADT) for SMP configuration information
[    0.059432] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.059440] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.059457] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.059459] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.059460] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.059461] PM: Registered nosave memory: [mem 0x81b84000-0x81b84fff]
[    0.059462] PM: Registered nosave memory: [mem 0x81b85000-0x81b85fff]
[    0.059463] PM: Registered nosave memory: [mem 0x87cd1000-0x89d76fff]
[    0.059464] PM: Registered nosave memory: [mem 0x89d77000-0x89dc3fff]
[    0.059464] PM: Registered nosave memory: [mem 0x89dc4000-0x8a21bfff]
[    0.059465] PM: Registered nosave memory: [mem 0x8a21c000-0x8a6a9fff]
[    0.059465] PM: Registered nosave memory: [mem 0x8a6aa000-0x8a77efff]
[    0.059467] PM: Registered nosave memory: [mem 0x8a7ff000-0x8fffffff]
[    0.059467] PM: Registered nosave memory: [mem 0x90000000-0xefffffff]
[    0.059468] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.059468] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[    0.059469] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.059469] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.059470] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.059471] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.059471] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.059472] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.059472] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.059473] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.059473] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.059476] [mem 0x90000000-0xefffffff] available for PCI devices
[    0.059477] Booting paravirtualized kernel on bare hardware
[    0.059479] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.165500] random: get_random_bytes called from start_kernel+0x95/0x53f with crng_init=0
[    0.165506] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.165725] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
[    0.165730] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.165732] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.165751] Built 1 zonelists, mobility grouping on.  Total pages: 2027294
[    0.165752] Policy zone: Normal
[    0.165753] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19-x86_64 root=UUID=15aca89c-b0e6-4be8-9678-226d552dcf27 rw nouveau.modeset=0 quiet
[    0.170220] Calgary: detecting Calgary via BIOS EBDA area
[    0.170222] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.193731] Memory: 7881208K/8237996K available (12300K kernel code, 1385K rwdata, 3696K rodata, 1536K init, 3796K bss, 356788K reserved, 0K cma-reserved)
[    0.193844] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.193850] Kernel/User page tables isolation: enabled
[    0.203403] ftrace: allocating 36128 entries in 142 pages
[    0.218154] rcu: Preemptible hierarchical RCU implementation.
[    0.218155] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.218156] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.218157] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.218157] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.218158] 	Tasks RCU enabled.
[    0.218159] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.219814] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.219966] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.220086] Console: colour dummy device 80x25
[    0.220091] console [tty0] enabled
[    0.220107] ACPI: Core revision 20180810
[    0.220581] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.220613] hpet clockevent registered
[    0.220653] APIC: Switch to symmetric I/O mode setup
[    0.220655] DMAR: Host address width 39
[    0.220657] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.220662] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.220663] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.220666] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.220668] DMAR: RMRR base: 0x0000008867f000 end: 0x0000008869efff
[    0.220668] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
[    0.220670] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.220670] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.220671] DMAR: ANDD device: 7 name: \_SB.PCI0.SPI0
[    0.220671] DMAR: ANDD device: 9 name: \_SB.PCI0.UA00
[    0.220673] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.220673] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.220674] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.222346] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.222348] x2apic enabled
[    0.222360] Switched APIC routing to cluster x2apic.
[    0.226522] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.240624] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
[    0.240637] Calibrating delay loop (skipped), value calculated using timer frequency.. 3601.00 BogoMIPS (lpj=6000000)
[    0.240639] pid_max: default: 32768 minimum: 301
[    0.241343] Security Framework initialized
[    0.241344] Yama: becoming mindful.
[    0.241348] AppArmor: AppArmor disabled by boot time parameter
[    0.242671] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.243345] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.243382] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.243403] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.243609] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.243610] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.243616] mce: CPU supports 10 MCE banks
[    0.243626] CPU0: Thermal monitoring enabled (TM1)
[    0.243647] process: using mwait in idle threads
[    0.243650] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.243650] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.243652] Spectre V2 : Mitigation: Full generic retpoline
[    0.243653] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.243653] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.243659] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.243659] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.243660] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.248401] Freeing SMP alternatives memory: 28K
[    0.253138] TSC deadline timer enabled
[    0.253143] smpboot: CPU0: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xa)
[    0.270662] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.270809] ... version:                4
[    0.270810] ... bit width:              48
[    0.270810] ... generic registers:      4
[    0.270811] ... value mask:             0000ffffffffffff
[    0.270812] ... max period:             00007fffffffffff
[    0.270812] ... fixed-purpose events:   3
[    0.270813] ... event mask:             000000070000000f
[    0.277309] rcu: Hierarchical SRCU implementation.
[    0.300944] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.307338] smp: Bringing up secondary CPUs ...
[    0.347351] x86: Booting SMP configuration:
[    0.347358] .... node  #0, CPUs:      #1
[    0.000564] [Firmware Bug]: TSC ADJUST differs within socket(s), fixing all errors
[    0.387348]  #2 #3 #4 #5 #6 #7
[    0.587869] smp: Brought up 1 node, 8 CPUs
[    0.587869] smpboot: Max logical packages: 1
[    0.587869] smpboot: Total of 8 processors activated (28811.00 BogoMIPS)
[    0.590958] devtmpfs: initialized
[    0.590958] x86/mm: Memory block size: 128MB
[    0.591255] PM: Registering ACPI NVS region [mem 0x81b84000-0x81b84fff] (4096 bytes)
[    0.591255] PM: Registering ACPI NVS region [mem 0x89dc4000-0x8a21bfff] (4554752 bytes)
[    0.591255] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.591255] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.591255] pinctrl core: initialized pinctrl subsystem
[    0.591255] RTC time: 12:28:28, date: 05/17/19
[    0.591255] NET: Registered protocol family 16
[    0.591255] audit: initializing netlink subsys (disabled)
[    0.591255] audit: type=2000 audit(1558096108.373:1): state=initialized audit_enabled=0 res=1
[    0.597334] cpuidle: using governor ladder
[    0.597382] cpuidle: using governor menu
[    0.597382] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.597382] ACPI: bus type PCI registered
[    0.597382] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.597426] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.597429] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.597442] PCI: Using configuration type 1 for base access
[    0.598899] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.598899] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.598899] ACPI: Added _OSI(Module Device)
[    0.598899] ACPI: Added _OSI(Processor Device)
[    0.598899] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.598899] ACPI: Added _OSI(Processor Aggregator Device)
[    0.598899] ACPI: Added _OSI(Linux-Dell-Video)
[    0.598899] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.598899] ACPI: EC: EC started
[    0.598899] ACPI: EC: interrupt blocked
[    0.598899] ACPI: \: Used as first EC
[    0.598899] ACPI: \: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.598899] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.648613] ACPI: 12 ACPI AML tables successfully acquired and loaded
[    0.662451] ACPI: Dynamic OEM Table Load:
[    0.662457] ACPI: SSDT 0xFFFF8A94A4C10800 00058B (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.662983] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[    0.664486] ACPI: Dynamic OEM Table Load:
[    0.664491] ACPI: SSDT 0xFFFF8A94A488E000 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.664972] ACPI: Dynamic OEM Table Load:
[    0.664976] ACPI: SSDT 0xFFFF8A94A53FB900 0000BA (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.665375] ACPI: Dynamic OEM Table Load:
[    0.665379] ACPI: SSDT 0xFFFF8A94A4C12800 000628 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.666177] ACPI: Dynamic OEM Table Load:
[    0.666183] ACPI: SSDT 0xFFFF8A94A48A3000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.667348] ACPI: Dynamic OEM Table Load:
[    0.667352] ACPI: SSDT 0xFFFF8A94A488D400 000317 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.667857] ACPI: Dynamic OEM Table Load:
[    0.667861] ACPI: SSDT 0xFFFF8A94A488A400 00030A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.674633] ACPI: Interpreter enabled
[    0.674671] ACPI: (supports S0 S3 S4 S5)
[    0.674672] ACPI: Using IOAPIC for interrupt routing
[    0.674710] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.675841] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.681387] ACPI: Power Resource [PC01] (on)
[    0.683735] ACPI: Power Resource [WRST] (on)
[    0.699819] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.699825] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.701600] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.701601] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.702384] PCI host bridge to bus 0000:00
[    0.702386] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.702388] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.702389] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.702390] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.702391] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.702392] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.702393] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.702394] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.702395] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.702397] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.702398] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.702399] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.702400] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.702401] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.702402] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.702403] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.702404] pci_bus 0000:00: root bus resource [mem 0x90000000-0xefffffff window]
[    0.702405] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.702407] pci_bus 0000:00: root bus resource [bus 00-7e]
[    0.702415] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
[    0.702794] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
[    0.702806] pci 0000:00:02.0: reg 0x10: [mem 0xed000000-0xedffffff 64bit]
[    0.702813] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.702817] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.702833] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.702991] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.703004] pci 0000:00:04.0: reg 0x10: [mem 0xef320000-0xef327fff 64bit]
[    0.703247] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.703269] pci 0000:00:14.0: reg 0x10: [mem 0xef310000-0xef31ffff 64bit]
[    0.703336] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.703574] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.703596] pci 0000:00:14.2: reg 0x10: [mem 0xef33a000-0xef33afff 64bit]
[    0.703877] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.704126] pci 0000:00:15.0: reg 0x10: [mem 0xef339000-0xef339fff 64bit]
[    0.705194] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.705457] pci 0000:00:15.1: reg 0x10: [mem 0xef338000-0xef338fff 64bit]
[    0.706459] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.706485] pci 0000:00:16.0: reg 0x10: [mem 0xef337000-0xef337fff 64bit]
[    0.706558] pci 0000:00:16.0: PME# supported from D3hot
[    0.706785] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.706803] pci 0000:00:17.0: reg 0x10: [mem 0xef330000-0xef331fff]
[    0.706811] pci 0000:00:17.0: reg 0x14: [mem 0xef336000-0xef3360ff]
[    0.706818] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.706826] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.706833] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.706841] pci 0000:00:17.0: reg 0x24: [mem 0xef335000-0xef3357ff]
[    0.706882] pci 0000:00:17.0: PME# supported from D3hot
[    0.707063] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.707134] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.707357] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[    0.707428] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.707635] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[    0.707705] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.708007] pci 0000:00:1e.0: [8086:9d27] type 00 class 0x118000
[    0.708271] pci 0000:00:1e.0: reg 0x10: [mem 0xef334000-0xef334fff 64bit]
[    0.709343] pci 0000:00:1e.2: [8086:9d29] type 00 class 0x118000
[    0.709606] pci 0000:00:1e.2: reg 0x10: [mem 0xef333000-0xef333fff 64bit]
[    0.710604] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[    0.710876] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.710890] pci 0000:00:1f.2: reg 0x10: [mem 0xef32c000-0xef32ffff]
[    0.711088] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[    0.711114] pci 0000:00:1f.3: reg 0x10: [mem 0xef328000-0xef32bfff 64bit]
[    0.711139] pci 0000:00:1f.3: reg 0x20: [mem 0xef300000-0xef30ffff 64bit]
[    0.711186] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.711463] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.711524] pci 0000:00:1f.4: reg 0x10: [mem 0xef332000-0xef3320ff 64bit]
[    0.711595] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.711887] pci 0000:01:00.0: [10de:1d12] type 00 class 0x030200
[    0.711911] pci 0000:01:00.0: reg 0x10: [mem 0xee000000-0xeeffffff]
[    0.711924] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.711935] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
[    0.711943] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.711952] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef07ffff pref]
[    0.712165] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.712168] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.712170] pci 0000:00:1c.0:   bridge window [mem 0xee000000-0xef0fffff]
[    0.712174] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[    0.712238] pci 0000:02:00.0: [10ec:522a] type 00 class 0xff0000
[    0.712264] pci 0000:02:00.0: reg 0x10: [mem 0xef200000-0xef200fff]
[    0.712382] pci 0000:02:00.0: supports D1 D2
[    0.712383] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.712504] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.712508] pci 0000:00:1c.4:   bridge window [mem 0xef200000-0xef2fffff]
[    0.712949] pci 0000:03:00.0: [8086:24fd] type 00 class 0x028000
[    0.713044] pci 0000:03:00.0: reg 0x10: [mem 0xef100000-0xef101fff 64bit]
[    0.713263] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.714023] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.714027] pci 0000:00:1c.5:   bridge window [mem 0xef100000-0xef1fffff]
[    0.715504] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.715566] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.715627] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.715688] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.715748] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.715808] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.715868] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.717342] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.727700] ACPI: EC: interrupt unblocked
[    0.727719] ACPI: EC: event unblocked
[    0.727760] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.727761] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.727831] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.727831] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.727831] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.727831] vgaarb: loaded
[    0.727831] ACPI: bus type USB registered
[    0.727831] usbcore: registered new interface driver usbfs
[    0.727831] usbcore: registered new interface driver hub
[    0.727831] usbcore: registered new device driver usb
[    0.727831] pps_core: LinuxPPS API ver. 1 registered
[    0.727831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.727831] PTP clock support registered
[    0.727831] EDAC MC: Ver: 3.0.0
[    0.727986] Registered efivars operations
[    0.750921] PCI: Using ACPI for IRQ routing
[    0.760625] PCI: pci_cache_line_size set to 64 bytes
[    0.760625] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.760625] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.760625] e820: reserve RAM buffer [mem 0x81b84000-0x83ffffff]
[    0.760625] e820: reserve RAM buffer [mem 0x87cd1000-0x87ffffff]
[    0.760625] e820: reserve RAM buffer [mem 0x8a7ff000-0x8bffffff]
[    0.760625] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
[    0.760627] NetLabel: Initializing
[    0.760627] NetLabel:  domain hash size = 128
[    0.760627] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.760627] NetLabel:  unlabeled traffic allowed by default
[    0.764346] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.764346] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.767295] clocksource: Switched to clocksource tsc-early
[    0.776973] VFS: Disk quotas dquot_6.6.0
[    0.776986] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.777055] pnp: PnP ACPI init
[    0.777342] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.777344] system 00:00: [io  0xffff] has been reserved
[    0.777345] system 00:00: [io  0xffff] has been reserved
[    0.777347] system 00:00: [io  0xffff] has been reserved
[    0.777348] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.777349] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.777354] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.777460] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.777502] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.777505] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.777681] pnp 00:03: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.777946] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.777948] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.777949] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.777951] system 00:04: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.777952] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.777954] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.777955] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.777956] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.777958] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.777959] system 00:04: [mem 0xeffe0000-0xefffffff] has been reserved
[    0.777963] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.778019] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.778021] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.778022] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.778024] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.778025] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.778026] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.778028] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.778031] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.778366] system 00:06: [io  0xff00-0xfffe] has been reserved
[    0.778370] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.779621] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[    0.779622] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[    0.779625] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.781136] pnp: PnP ACPI: found 8 devices
[    0.786745] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.786767] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.786770] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.786773] pci 0000:00:1c.0:   bridge window [mem 0xee000000-0xef0fffff]
[    0.786776] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
[    0.786780] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.786783] pci 0000:00:1c.4:   bridge window [mem 0xef200000-0xef2fffff]
[    0.786789] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.786792] pci 0000:00:1c.5:   bridge window [mem 0xef100000-0xef1fffff]
[    0.786798] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.786800] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.786801] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.786802] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.786803] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.786805] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.786806] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.786807] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.786808] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.786809] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.786811] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.786812] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.786813] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.786814] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.786815] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.786816] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.786818] pci_bus 0000:00: resource 20 [mem 0x90000000-0xefffffff window]
[    0.786819] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
[    0.786820] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.786821] pci_bus 0000:01: resource 1 [mem 0xee000000-0xef0fffff]
[    0.786823] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
[    0.786824] pci_bus 0000:02: resource 1 [mem 0xef200000-0xef2fffff]
[    0.786825] pci_bus 0000:03: resource 1 [mem 0xef100000-0xef1fffff]
[    0.787001] NET: Registered protocol family 2
[    0.787116] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.787142] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.787253] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.787395] TCP: Hash tables configured (established 65536 bind 65536)
[    0.787422] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.787443] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.787494] NET: Registered protocol family 1
[    0.787498] NET: Registered protocol family 44
[    0.787505] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.788178] PCI: CLS 64 bytes, default 64
[    0.788207] Unpacking initramfs...
[    0.901213] Freeing initrd memory: 10664K
[    0.901262] DMAR: ACPI device "device:71" under DMAR at fed91000 as 00:15.0
[    0.901265] DMAR: ACPI device "device:72" under DMAR at fed91000 as 00:15.1
[    0.901268] DMAR: ACPI device "device:73" under DMAR at fed91000 as 00:1e.2
[    0.901270] DMAR: ACPI device "device:74" under DMAR at fed91000 as 00:1e.0
[    0.901294] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.901295] software IO TLB: mapped [mem 0x7c853000-0x80853000] (64MB)
[    0.901325] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
[    0.901349] clocksource: Switched to clocksource tsc
[    0.901487] Scanning for low memory corruption every 60 seconds
[    0.902031] Initialise system trusted keyrings
[    0.902042] Key type blacklist registered
[    0.902083] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.903071] zbud: loaded
[    0.903339] pstore: using zstd compression
[    0.904349] Key type asymmetric registered
[    0.904350] Asymmetric key parser 'x509' registered
[    0.904359] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.904397] io scheduler noop registered
[    0.904397] io scheduler deadline registered
[    0.904422] io scheduler cfq registered
[    0.904423] io scheduler mq-deadline registered
[    0.904424] io scheduler kyber registered
[    0.904442] io scheduler bfq registered
[    0.904459] io scheduler bfq-sq registered (default)
[    0.904470] BFQ I/O-scheduler: v9 (with cgroups support)
[    0.904493] io scheduler bfq-mq registered
[    0.904493] BFQ I/O-scheduler: v9 (with cgroups support)
[    0.905334] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[    0.905353] pcieport 0000:00:1c.4: AER enabled with IRQ 123
[    0.905369] pcieport 0000:00:1c.5: AER enabled with IRQ 124
[    0.905379] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[    0.905389] pcieport 0000:00:1c.4: Signaling PME with IRQ 123
[    0.905397] pcieport 0000:00:1c.5: Signaling PME with IRQ 124
[    0.905417] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.905483] efifb: probing for efifb
[    0.905498] efifb: showing boot graphics
[    0.906432] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
[    0.906433] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.906433] efifb: scrolling: redraw
[    0.906435] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.906467] fbcon: Deferring console take-over
[    0.906468] fb0: EFI VGA frame buffer device
[    0.906475] intel_idle: MWAIT substates: 0x11142120
[    0.906476] intel_idle: v0.4.1 model 0x8E
[    0.906829] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.906882] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C09:01/PNP0C0D:00/input/input0
[    0.906889] ACPI: Lid Switch [LID]
[    0.906955] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.906962] ACPI: Sleep Button [SLPB]
[    0.906985] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.906991] ACPI: Power Button [PWRB]
[    0.907016] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.907026] ACPI: Power Button [PWRF]
[    0.908968] thermal LNXTHERM:00: registered as thermal_zone0
[    0.908969] ACPI: Thermal Zone [THRM] (55 C)
[    0.909161] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.910398] usbcore: registered new interface driver usbserial_generic
[    0.910401] usbserial: USB Serial support registered for generic
[    0.910419] rtc_cmos 00:01: RTC can wake from S4
[    0.910897] rtc_cmos 00:01: registered as rtc0
[    0.910909] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[    0.910956] intel_pstate: Intel P-state driver initializing
[    0.911627] intel_pstate: HWP enabled
[    0.911750] ledtrig-cpu: registered to indicate activity on CPUs
[    0.911772] intel_pmc_core:  initialized
[    0.911951] NET: Registered protocol family 10
[    0.916986] Segment Routing with IPv6
[    0.917004] NET: Registered protocol family 17
[    0.917765] RAS: Correctable Errors collector initialized.
[    0.917797] microcode: sig=0x806ea, pf=0x80, revision=0x9e
[    0.918102] microcode: Microcode Update Driver: v2.2.
[    0.918115] sched_clock: Marking stable (920867042, -2768564)->(929774143, -11675665)
[    0.918477] registered taskstats version 1
[    0.918483] Loading compiled-in X.509 certificates
[    0.920810] Loaded X.509 cert 'Build time autogenerated kernel key: d345ff620d1eca04703d453b132463f2951a4050'
[    0.920833] zswap: loaded using pool lzo/zbud
[    0.924710] Key type big_key registered
[    0.926117]   Magic number: 3:469:481
[    0.926334] rtc_cmos 00:01: setting system clock to 2019-05-17 12:28:29 UTC (1558096109)
[    1.236821] Freeing unused decrypted memory: 2040K
[    1.477900] Freeing unused kernel image memory: 1536K
[    1.477965] Write protecting the kernel read-only data: 18432k
[    1.479327] Freeing unused kernel image memory: 2008K
[    1.479517] Freeing unused kernel image memory: 400K
[    1.486801] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.486802] x86/mm: Checking user space page tables
[    1.493986] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.493988] Run /init as init process
[    1.624580] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[    1.624581] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.627567] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.628497] rtsx_pci 0000:02:00.0: enabling device (0000 -> 0002)
[    1.633846] SCSI subsystem initialized
[    1.638451] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.638459] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.639535] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    1.639540] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.639734] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.639736] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.639737] usb usb1: Product: xHCI Host Controller
[    1.639739] usb usb1: Manufacturer: Linux 4.19.36-1-MANJARO xhci-hcd
[    1.639740] usb usb1: SerialNumber: 0000:00:14.0
[    1.639864] hub 1-0:1.0: USB hub found
[    1.639881] hub 1-0:1.0: 12 ports detected
[    1.640968] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.640971] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.640974] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.641013] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    1.641014] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.641016] usb usb2: Product: xHCI Host Controller
[    1.641017] usb usb2: Manufacturer: Linux 4.19.36-1-MANJARO xhci-hcd
[    1.641018] usb usb2: SerialNumber: 0000:00:14.0
[    1.641186] hub 2-0:1.0: USB hub found
[    1.641199] hub 2-0:1.0: 6 ports detected
[    1.641534] usb: port power management may be unreliable
[    1.642948] libata version 3.00 loaded.
[    1.647247] ahci 0000:00:17.0: version 3.0
[    1.657704] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x4 impl SATA mode
[    1.657708] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.658375] scsi host0: ahci
[    1.658535] scsi host1: ahci
[    1.658852] scsi host2: ahci
[    1.658928] ata1: DUMMY
[    1.658929] ata2: DUMMY
[    1.658931] ata3: SATA max UDMA/133 abar m2048@0xef335000 port 0xef335200 irq 127
[    1.681022] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.970298] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.970820] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[    1.972097] ata3.00: ATA-10: Micron_1100_MTFDDAV256TBN,  M0MA031, max UDMA/133
[    1.972103] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.975574] ata3.00: configured for UDMA/133
[    1.986881] scsi 2:0:0:0: Direct-Access     ATA      Micron_1100_MTFD A031 PQ: 0 ANSI: 5
[    1.996898] ata3.00: Enabling discard_zeroes_data
[    1.996928] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.996935] sd 2:0:0:0: [sda] Write Protect is off
[    1.996938] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.996947] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.997063] ata3.00: Enabling discard_zeroes_data
[    1.998388]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    1.998989] ata3.00: Enabling discard_zeroes_data
[    1.999022] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.112612] usb 1-1: New USB device found, idVendor=12c9, idProduct=102a, bcdDevice= 1.10
[    2.112614] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.112615] usb 1-1: Product: 2.4G Wireless Mouse
[    2.112617] usb 1-1: Manufacturer: Newmen Tech.,LTD
[    2.116441] hidraw: raw HID events driver (C) Jiri Kosina
[    2.119254] usbcore: registered new interface driver usbhid
[    2.119255] usbhid: USB HID core driver
[    2.120478] input: Newmen Tech.,LTD 2.4G Wireless Mouse Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:12C9:102A.0001/input/input5
[    2.120509] input: Newmen Tech.,LTD 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:12C9:102A.0001/input/input6
[    2.120574] hid-generic 0003:12C9:102A.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Newmen Tech.,LTD 2.4G Wireless Mouse] on usb-0000:00:14.0-1/input0
[    2.122021] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    2.133755] random: fast init done
[    2.234045] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[    2.310050] systemd[1]: systemd 242.16-1-manjaro running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.324578] systemd[1]: Detected architecture x86-64.
[    2.329182] systemd[1]: Set hostname to <ZenDriver>.
[    2.387787] usb 1-5: New USB device found, idVendor=13d3, idProduct=5a09, bcdDevice=17.02
[    2.387796] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.387801] usb 1-5: Product: USB2.0 VGA UVC WebCam
[    2.387806] usb 1-5: Manufacturer: AzureWave
[    2.387810] usb 1-5: SerialNumber: 0001
[    2.510745] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[    2.606716] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.606796] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.606808] systemd[1]: Reached target Remote File Systems.
[    2.606848] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.606865] systemd[1]: Reached target Swap.
[    2.607108] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.607197] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.621368] EXT4-fs (sda5): re-mounted. Opts: discard
[    2.629812] random: lvm: uninitialized urandom read (4 bytes read)
[    2.638362] random: systemd-random-: uninitialized urandom read (512 bytes read)
[    2.654956] usb 1-8: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
[    2.654958] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.863090] audit: type=1130 audit(1558096111.433:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.871604] systemd-journald[253]: Received request to flush runtime journal from PID 1
[    3.016254] audit: type=1130 audit(1558096111.586:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.031929] audit: type=1130 audit(1558096111.603:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.087217] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input7
[    3.165877] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    3.165933] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    3.179109] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    3.180958] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    3.190415] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.190417] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.190418] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.190419] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.190420] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.190421] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.198480] ACPI: AC Adapter [AC0] (on-line)
[    3.203632] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    3.217144] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.217975] battery: ACPI: Battery Slot [BAT0] (battery present)
[    3.218637] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[    3.225044] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    3.227172] Linux agpgart interface v0.103
[    3.234167] cryptd: max_cpu_qlen set to 1000
[    3.251096] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    3.251549] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    3.260064] AVX2 version of gcm_enc/dec engaged.
[    3.260066] AES CTR mode by8 optimization enabled
[    3.260140] i2c_hid i2c-ELAN1200:00: i2c-ELAN1200:00 supply vdd not found, using dummy regulator
[    3.260166] i2c_hid i2c-ELAN1200:00: Linked as a consumer to regulator.0
[    3.260170] i2c_hid i2c-ELAN1200:00: i2c-ELAN1200:00 supply vddl not found, using dummy regulator
[    3.287183] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    3.294996] input: ELAN1200:00 04F3:3066 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1200:00/0018:04F3:3066.0002/input/input9
[    3.295123] input: ELAN1200:00 04F3:3066 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1200:00/0018:04F3:3066.0002/input/input10
[    3.295233] hid-generic 0018:04F3:3066.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3066] on i2c-ELAN1200:00
[    3.300050] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[    3.300553] idma64 idma64.2: Found Intel integrated DMA 64-bit
[    3.303792] intel-lpss 0000:00:1e.2: enabling device (0000 -> 0002)
[    3.304727] idma64 idma64.3: Found Intel integrated DMA 64-bit
[    3.304988] Bluetooth: Core ver 2.22
[    3.305013] NET: Registered protocol family 31
[    3.305014] Bluetooth: HCI device and connection manager initialized
[    3.305018] Bluetooth: HCI socket layer initialized
[    3.305021] Bluetooth: L2CAP socket layer initialized
[    3.305029] Bluetooth: SCO socket layer initialized
[    3.356035] asus_wmi: ASUS WMI generic driver loaded
[    3.366531] iTCO_vendor_support: vendor-support=0
[    3.367396] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.377490] asus_wmi: Initialization: 0x1
[    3.377617] asus_wmi: BIOS WMI version: 9.0
[    3.377704] asus_wmi: SFUN value: 0x21
[    3.379835] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.380508] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input11
[    3.380896] asus_wmi: Number of fans: 0
[    3.405908] audit: type=1130 audit(1558096111.976:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.433356] loop: module loaded
[    3.495312] audit: type=1130 audit(1558096112.066:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-9E7E\x2d866F comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.511221] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.511401] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    3.511604] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.517450] usbcore: registered new interface driver btusb
[    3.522346] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.524707] Bluetooth: hci0: Firmware revision 0.1 build 43 week 1 2019
[    3.526800] audit: type=1130 audit(1558096112.096:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@leds:asus::kbd_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.549335] VFIO - User Level meta-driver version: 0.3
[    3.595590] Intel(R) Wireless WiFi driver for Linux
[    3.595593] Copyright(c) 2003- 2015 Intel Corporation
[    3.596112] iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
[    3.620731] audit: type=1130 audit(1558096112.193:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.629041] input: ELAN1200:00 04F3:3066 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-ELAN1200:00/0018:04F3:3066.0002/input/input13
[    3.629680] hid-multitouch 0018:04F3:3066.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3066] on i2c-ELAN1200:00
[    3.637402] dw-apb-uart.2: ttyS0 at MMIO 0xef334000 (irq = 20, base_baud = 115200) is a 16550A
[    3.664251] mousedev: PS/2 mouse device common for all mice
[    3.665917] iwlwifi 0000:03:00.0: loaded firmware version 36.9f0a2d68.0 op_mode iwlmvm
[    3.686408] audit: type=1130 audit(1558096112.256:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.704281] audit: type=1127 audit(1558096112.273:10): pid=454 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[    3.714075] intel_rapl: Found RAPL domain package
[    3.714079] intel_rapl: Found RAPL domain core
[    3.714080] intel_rapl: Found RAPL domain uncore
[    3.714082] intel_rapl: Found RAPL domain dram
[    3.758457] media: Linux media interface: v0.10
[    3.853204] videodev: Linux video capture interface: v2.00
[    3.906386] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
[    3.906390] fb: switching to inteldrmfb from EFI VGA
[    3.906512] [drm] Replacing VGA console driver
[    3.908572] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.908574] [drm] Driver supports precise vblank timestamp query.
[    3.909469] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.910782] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    3.921267] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    3.922758] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[    3.924759] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.925125] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[    3.925311] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    3.925371] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/LNXVIDEO:01/input/input15
[    3.925595] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.936563] fbcon: inteldrmfb (fb0) is primary device
[    3.936565] fbcon: Deferring console take-over
[    3.936570] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.941051] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (13d3:5a09)
[    3.945798] uvcvideo: Failed to initialize entity for entity 6
[    3.945801] uvcvideo: Failed to register entites (-22).
[    3.945978] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input16
[    3.946155] usbcore: registered new interface driver uvcvideo
[    3.946157] USB Video Class driver (1.1.1)
[    3.971371] random: crng init done
[    3.990125] iwlwifi 0000:03:00.0: base HW address: 40:a3:cc:22:d7:a1
[    4.015401] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC294: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    4.015405] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.015408] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    4.015410] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.015412] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.015415] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[    4.015417] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    4.075047] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    4.075612] thermal thermal_zone9: failed to read out thermal zone (-61)
[    4.078563] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    5.141691] bbswitch: loading out-of-tree module taints kernel.
[    5.141751] bbswitch: module verification failed: signature and/or required key missing - tainting kernel
[    5.142063] bbswitch: version 0.8
[    5.142069] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    5.142076] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.RP01.PEGP
[    5.142086] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180810/nsarguments-66)
[    5.142225] bbswitch: detected an Optimus _DSM function
[    5.142239] pci 0000:01:00.0: enabling device (0006 -> 0007)
[    5.142344] bbswitch: disabling discrete graphics
[    5.191606] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
[    5.205663] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.205665] Bluetooth: BNEP filters: protocol multicast
[    5.205668] Bluetooth: BNEP socket layer initialized
[    5.478641] input: HDA Intel PCH Headset Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    5.478744] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[    5.478809] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[    5.480028] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    5.480108] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    5.480182] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    5.480254] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    5.629494] kauditd_printk_skb: 15 callbacks suppressed
[    5.629496] audit: type=1130 audit(1558096114.199:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.693492] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    5.713496] audit: type=1130 audit(1558096114.283:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.715625] audit: type=1130 audit(1558096114.286:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sddm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.937709] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    6.154265] audit: type=1130 audit(1558096114.726:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=tlp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.191561] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    6.241623] audit: type=1130 audit(1558096114.813:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.336679] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    7.353386] audit: type=1006 audit(1558096115.923:31): pid=786 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[    7.375851] audit: type=1130 audit(1558096115.946:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.382146] audit: type=1006 audit(1558096115.953:33): pid=791 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[    7.490669] audit: type=1130 audit(1558096116.059:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.075795] audit: type=1131 audit(1558096117.646:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.788762] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    9.994667] Bluetooth: RFCOMM TTY layer initialized
[    9.994678] Bluetooth: RFCOMM socket layer initialized
[    9.994684] Bluetooth: RFCOMM ver 1.11
[   11.579846] kauditd_printk_skb: 3 callbacks suppressed
[   11.579848] audit: type=1130 audit(1558096120.149:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=org.cups.cupsd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.661150] wlp3s0: authenticate with bc:05:43:ea:4a:be
[   11.671998] wlp3s0: send auth to bc:05:43:ea:4a:be (try 1/3)
[   11.680497] wlp3s0: authenticated
[   11.687314] wlp3s0: associate with bc:05:43:ea:4a:be (try 1/3)
[   11.688705] wlp3s0: RX AssocResp from bc:05:43:ea:4a:be (capab=0x511 status=0 aid=2)
[   11.691280] wlp3s0: associated
[   11.726699] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   11.736336] wlp3s0: Limiting TX power to 20 (27 - 7) dBm as advertised by bc:05:43:ea:4a:be
[   16.007489] audit: type=1131 audit(1558096124.579:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   23.066534] fuse init (API version 7.27)
[   35.650077] audit: type=1131 audit(1558096144.216:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

Offline

#6 17.05.2019 14:51:55

schard
Moderator

Re: Tonausgabeprobleme

Die Karte wird auf jeden Fall erkannt.
Was sagt

pacmd list-sinks

?

Offline

#7 17.05.2019 15:09:52

AVRDriver
Mitglied

Re: Tonausgabeprobleme

1 sink(s) available.
  * index: 0
	name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: IDLE
	suspend cause: (none)
	priority: 9039
	volume: front-left: 32770 /  50% / -18,06 dB,   front-right: 32770 /  50% / -18,06 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 12,16 ms
	max request: 2 KiB
	max rewind: 2 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 1
	configured latency: 11,61 ms; range is 0,50 .. 2000,00 ms
	card: 0 <alsa_card.pci-0000_00_1f.3>
	module: 6
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC294 Analog"
		alsa.id = "ALC294 Analog"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "0"
		alsa.card = "0"
		alsa.card_name = "HDA Intel PCH"
		alsa.long_card_name = "HDA Intel PCH at 0xef328000 irq 132"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:00:1f.3"
		sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
		device.bus = "pci"
		device.vendor.id = "8086"
		device.vendor.name = "Intel Corporation"
		device.product.id = "9d71"
		device.product.name = "Sunrise Point-LP HD Audio"
		device.form_factor = "internal"
		device.string = "front:0"
		device.buffering.buffer_size = "352800"
		device.buffering.fragment_size = "176400"
		device.access_mode = "mmap+timer"
		device.profile.name = "analog-stereo"
		device.profile.description = "Analog Stereo"
		device.description = "Internes Audio Analog Stereo"
		alsa.mixer_name = "Realtek ALC294"
		alsa.components = "HDA:10ec0294,10431cd0,00100004 HDA:8086280b,80860101,00100000"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		analog-output-speaker: Lautsprecher (priority 10000, latency offset 0 usec, available: unknown)
			properties:
				device.icon_name = "audio-speakers"
		analog-output-headphones: Kopfhörer (priority 9000, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
	active port: <analog-output-speaker>

Offline

#8 17.05.2019 15:38:45

schard
Moderator

Re: Tonausgabeprobleme

Das sieht danach aus, als ob keine Kopfhörer / Lautsprecher angeschlossen sind:

pacmd schrieb:

analog-output-speaker: Lautsprecher (priority 10000, latency offset 0 usec, available: unknown)
            properties:
                device.icon_name = "audio-speakers"
        analog-output-headphones: Kopfhörer (priority 9000, latency offset 0 usec, available: no)
            properties:
                device.icon_name = "audio-headphones"

Offline

#9 17.05.2019 18:45:36

AVRDriver
Mitglied

Re: Tonausgabeprobleme

Merkwürdig.

Eben habe ich den Rechner nochmal angeschmissen und erst ging der Ton wieder. Dann habe ich Musik angemacht und man konnte hören wie die Ausgabe immer tiefer geworden ist und letztlich weg war.
Dann ist für einige Zeit der Ton weg, aber er kommt wieder nach ein paar Minuten wie es scheint. Dann das selbe Spiel von vorne...

Gruß

Offline

#10 17.05.2019 19:52:43

schard
Moderator

Re: Tonausgabeprobleme

Dann vermute ich leider ein HW Problem.

Offline

#11 17.05.2019 21:05:16

AVRDriver
Mitglied

Re: Tonausgabeprobleme

Denke ich eher nicht, weil ich den Rechner seit über einem halben Jahr habe und mit Windows alles paletti ist. Das Problem tritt nur bei Linux auf.

Naja ich werde noch einige Sachen probieren und wenn ich Erfolg habe es hier mitteilen.

Danke für die schnelle Hilfe!

Gruß

Offline

#12 17.05.2019 22:18:45

blub
Gast

Re: Tonausgabeprobleme

Vielleicht findest du hier eine Lösung zu deinem Problem: https://forum.manjaro.org/t/alc294-anal … ones/54089

Wenn man ein bisschen googled, haben manche User Dualboot mit Windows 10 als Problemverursacher ausgemacht. Könnte das auch dein Problem erklären, dass du keine Regelmäßigkeit erkennst? Funktioniert der Sound bevorzugt dann nicht, wenn du vorher Windows gebootet hattest?

Schnellantwort auf dieses Thema

Schreibe deinen Beitrag und versende ihn
Deine Antwort

Fußzeile des Forums