Hallo,
Mein Odroid H2 (
https://wiki.odroid.com/odroid-h2/start#odroid-h2)
zeigt nach jedem Start von Lxde-Openbox nach wenigen Sekunden, bis zu 1-3 Minuten ein Bildschirm flackern.
dmesg zeigt dann:
[drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
Ich habe einiges versucht:
LTS-Kernel
Mit und ohne xf86-video-intel und 20-intel.conf
in /etc/mkinitcpio.conf MODULES=(i915)
mit boot Parameter
i915.enable_psr=0
intel_idle.max_cstate=0-4
intel_idle.max_cstate=2 verzögert das flackern ein wenig, mit dem Intel Treiber das gleiche
alles keine Lösung und bis auf mkinitcpio.conf MODULES=(i915) wieder entfernt.
Wenn ich vor dem flackern ein Video starte,
sehe ich am oberen Bildschirmrand einen grün roten Streifen bis ich das Video stoppe und auf das flackern warte,
danach läuft das Video wieder einwandfrei.
Nun ja, der Fehler ist mehr ein Schönheitsfehler als ein echtes Problem,
Trotzdem wäre eine Lösung schön.
inxi -Fxxx
System:
Host: OdiH2 Kernel: 4.20.6-arch1-1-ARCH x86_64 bits: 64 compiler: gcc
v: 8.2.1 Desktop: LXDE 0.9.3 info: lxpanel wm: Openbox 3.6.1
dm: LightDM 1.28.0 Distro: Arch Linux
Machine:
Type: Desktop Mobo: HARDKERNEL model: ODROID-H2 v: 1.0
serial: <root required> UEFI: American Megatrends v: 5.13 date: 12/05/2018
CPU:
Topology: Quad Core model: Intel Celeron J4105 bits: 64 type: MCP
arch: Goldmont Plus rev: 1 L2 cache: 4096 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 11984
Speed: 799 MHz min/max: 800/2500 MHz Core speeds (MHz): 1: 799 2: 798
3: 796 4: 799
Graphics:
Device-1: Intel driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:3185
Display: x11 server: X.Org 1.20.3 driver: modesetting unloaded: fbdev,vesa
alternate: intel resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa DRI Intel UHD Graphics 600 (Geminilake 2x6)
v: 4.5 Mesa 18.3.2 compat-v: 3.0 direct render: Yes
Audio:
Device-1: Intel driver: snd_hda_intel v: kernel bus ID: 00:0e.0
chip ID: 8086:3198
Sound Server: ALSA v: k4.20.6-arch1-1-ARCH
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver: r8169 v: kernel port: e000 bus ID: 02:00.0 chip ID: 10ec:8168
IF: enp2s0 state: down mac: 00:1e:06:45:01:5c
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver: r8169 v: kernel port: d000 bus ID: 03:00.0 chip ID: 10ec:8168
IF: enp3s0 state: down mac: 00:1e:06:45:01:5d
Device-3: Realtek RTL8188EUS 802.11n Wireless Network Adapter type: USB
driver: r8188eu bus ID: 1-4.2:5 chip ID: 0bda:8179
IF: wlp0s21f0u4u2 state: up mac: 80:3f:5d:10:35:20
Drives:
Local Storage: total: 3.87 TiB used: 2.62 TiB (67.9%)
ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 970 EVO 250GB
size: 232.89 GiB speed: 31.6 Gb/s lanes: 4 serial: S465NB0K824844M
rev: 1B2QEXE7 scheme: GPT
ID-2: /dev/sda type: USB vendor: Western Digital model: WD Elements 25A1
size: 3.64 TiB serial: 575835314441384C37534648 rev: 1014 scheme: GPT
Partition:
ID-1: / size: 160.03 GiB used: 47.77 GiB (29.9%) fs: ext4
dev: /dev/nvme0n1p2
ID-2: /boot size: 511.0 MiB used: 117.3 MiB (23.0%) fs: vfat
dev: /dev/nvme0n1p1
Sensors:
System Temperatures: cpu: 44.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 151 Uptime: 1h 14m Memory: 7.61 GiB used: 604.0 MiB (7.7%)
Init: systemd v: 240 Compilers: gcc: 8.2.1 Shell: bash v: 5.0.0
running in: lxterminal inxi: 3.0.29
dmesg
[p37@OdiH2 ~]$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2018-05-22
[ 0.000000] Linux version 4.20.6-arch1-1-ARCH (builduser@heftig-32156) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Thu Jan 31 08:22:01 UTC 2019
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=37bcaca0-6b49-4ca7-baea-faaf975dd8b2 rw
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000003e000-0x000000000003ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000076209fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007620a000-0x0000000079a55fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079a56000-0x0000000079aabfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000079aac000-0x0000000079ac5fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079ac6000-0x0000000079ef3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000079ef4000-0x000000007a777fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a778000-0x000000007a823fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a824000-0x000000007abfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ac00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x6ec8a018-0x6ec9a057] usable ==> usable
[ 0.000000] e820: update [mem 0x6ec8a018-0x6ec9a057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000003dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000003e000-0x000000000003ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000040000-0x000000000009dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000012151000-0x000000006ec8a017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006ec8a018-0x000000006ec9a057] usable
[ 0.000000] reserve setup_data: [mem 0x000000006ec9a058-0x0000000076209fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007620a000-0x0000000079a55fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000079a56000-0x0000000079aabfff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000079aac000-0x0000000079ac5fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000079ac6000-0x0000000079ef3fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000079ef4000-0x000000007a777fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007a778000-0x000000007a823fff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007a824000-0x000000007abfffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007ac00000-0x000000007fffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000027fffffff] usable
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x79aac000 ACPI=0x79aac000 SMBIOS=0x79d00000 SMBIOS 3.0=0x79cff000 ESRT=0x752c0298 MEMATTR=0x7362c018
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: HARDKERNEL ODROID-H2/ODROID-H2, BIOS 5.13 12/05/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1497.600 MHz processor
[ 0.000030] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000033] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000048] last_pfn = 0x280000 max_arch_pfn = 0x400000000
[ 0.000054] MTRR default type: uncachable
[ 0.000056] MTRR fixed ranges enabled:
[ 0.000058] 00000-9FFFF write-back
[ 0.000060] A0000-BFFFF uncachable
[ 0.000062] C0000-FFFFF write-protect
[ 0.000063] MTRR variable ranges enabled:
[ 0.000066] 0 base 00FF800000 mask 7FFF800000 write-combining
[ 0.000068] 1 base 0000000000 mask 7F80000000 write-back
[ 0.000070] 2 base 007B000000 mask 7FFF000000 uncachable
[ 0.000072] 3 base 007C000000 mask 7FFC000000 uncachable
[ 0.000074] 4 base 0100000000 mask 7F00000000 write-back
[ 0.000075] 5 base 0200000000 mask 7F80000000 write-back
[ 0.000077] 6 disabled
[ 0.000078] 7 disabled
[ 0.000079] 8 disabled
[ 0.000080] 9 disabled
[ 0.001873] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001982] last_pfn = 0x7ac00 max_arch_pfn = 0x400000000
[ 0.009326] esrt: Reserving ESRT space from 0x00000000752c0298 to 0x00000000752c02d0.
[ 0.009352] check: Scanning 1 areas for low memory corruption
[ 0.009357] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[ 0.009363] Using GB pages for direct mapping
[ 0.009367] BRK [0x24ee01000, 0x24ee01fff] PGTABLE
[ 0.009371] BRK [0x24ee02000, 0x24ee02fff] PGTABLE
[ 0.009373] BRK [0x24ee03000, 0x24ee03fff] PGTABLE
[ 0.009482] BRK [0x24ee04000, 0x24ee04fff] PGTABLE
[ 0.009799] BRK [0x24ee05000, 0x24ee05fff] PGTABLE
[ 0.009904] BRK [0x24ee06000, 0x24ee06fff] PGTABLE
[ 0.010008] BRK [0x24ee07000, 0x24ee07fff] PGTABLE
[ 0.010171] BRK [0x24ee08000, 0x24ee08fff] PGTABLE
[ 0.010304] BRK [0x24ee09000, 0x24ee09fff] PGTABLE
[ 0.010454] BRK [0x24ee0a000, 0x24ee0afff] PGTABLE
[ 0.010558] BRK [0x24ee0b000, 0x24ee0bfff] PGTABLE
[ 0.010784] Secure boot disabled
[ 0.010786] RAMDISK: [mem 0x6ec9b000-0x6f7c0fff]
[ 0.010801] ACPI: Early table checksum verification disabled
[ 0.010808] ACPI: RSDP 0x0000000079AAC000 000024 (v02 ALASKA)
[ 0.010814] ACPI: XSDT 0x0000000079AAC0C0 0000DC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.010824] ACPI: FACP 0x0000000079AB4DB0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.010834] ACPI: DSDT 0x0000000079AAC240 008B6E (v02 ALASKA A M I 01072009 INTL 20160930)
[ 0.010839] ACPI: FACS 0x0000000079AC5080 000040
[ 0.010843] ACPI: FPDT 0x0000000079AB4ED0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.010849] ACPI: FIDT 0x0000000079AB4F20 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.010854] ACPI: MCFG 0x0000000079AB4FC0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.010859] ACPI: DBG2 0x0000000079AB5000 000072 (v00 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.010864] ACPI: DBGP 0x0000000079AB5080 000034 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.010869] ACPI: HPET 0x0000000079AB50C0 000038 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.010874] ACPI: LPIT 0x0000000079AB5100 00005C (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.010879] ACPI: APIC 0x0000000079AB5160 000084 (v04 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.010884] ACPI: NPKT 0x0000000079AB51F0 000065 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.010889] ACPI: SSDT 0x0000000079AB5260 000C8F (v02 INTEL UsbCTabl 00000003 BRXT 0100000D)
[ 0.010894] ACPI: SSDT 0x0000000079AB5EF0 000158 (v01 Intel_ Platform 00001000 INTL 20160930)
[ 0.010899] ACPI: SSDT 0x0000000079AB6050 0000B1 (v01 Intel_ ADebTabl 00001000 INTL 20160930)
[ 0.010904] ACPI: SSDT 0x0000000079AB6110 0004D5 (v02 PmRef Cpu0Ist 00003000 INTL 20160930)
[ 0.010909] ACPI: SSDT 0x0000000079AB65F0 000775 (v02 CpuRef CpuSsdt 00003000 INTL 20160930)
[ 0.010915] ACPI: SSDT 0x0000000079AB6D70 00035F (v02 PmRef Cpu0Tst 00003000 INTL 20160930)
[ 0.010920] ACPI: SSDT 0x0000000079AB70D0 0001E6 (v02 PmRef ApTst 00003000 INTL 20160930)
[ 0.010925] ACPI: SSDT 0x0000000079AB72C0 0028FE (v02 SaSsdt SaSsdt 00003000 INTL 20160930)
[ 0.010930] ACPI: UEFI 0x0000000079AB9BC0 000042 (v01 ALASKA A M I 00000002 01000013)
[ 0.010935] ACPI: BGRT 0x0000000079AB9C10 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.010940] ACPI: DMAR 0x0000000079AB9C50 0000A8 (v01 INTEL GLK-SOC 00000003 BRXT 0100000D)
[ 0.010945] ACPI: WDAT 0x0000000079AB9D00 000104 (v01 00000000 00000000)
[ 0.010950] ACPI: WSMT 0x0000000079AB9E10 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.010963] ACPI: Local APIC address 0xfee00000
[ 0.011200] No NUMA configuration found
[ 0.011202] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[ 0.011209] NODE_DATA(0) allocated [mem 0x27fffc000-0x27fffffff]
[ 0.011256] Zone ranges:
[ 0.011258] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.011261] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.011263] Normal [mem 0x0000000100000000-0x000000027fffffff]
[ 0.011265] Device empty
[ 0.011267] Movable zone start for each node
[ 0.011268] Early memory node ranges
[ 0.011270] node 0: [mem 0x0000000000001000-0x000000000003dfff]
[ 0.011271] node 0: [mem 0x0000000000040000-0x000000000009dfff]
[ 0.011273] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.011274] node 0: [mem 0x0000000012151000-0x0000000076209fff]
[ 0.011276] node 0: [mem 0x0000000079a56000-0x0000000079aabfff]
[ 0.011277] node 0: [mem 0x0000000079ef4000-0x000000007a777fff]
[ 0.011278] node 0: [mem 0x000000007a824000-0x000000007abfffff]
[ 0.011280] node 0: [mem 0x0000000100000000-0x000000027fffffff]
[ 0.012900] Zeroed struct page in unavailable ranges: 45814 pages
[ 0.012903] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[ 0.012906] On node 0 totalpages: 2051338
[ 0.012908] DMA zone: 64 pages used for memmap
[ 0.012910] DMA zone: 22 pages reserved
[ 0.012912] DMA zone: 3995 pages, LIFO batch:0
[ 0.013123] DMA32 zone: 7414 pages used for memmap
[ 0.013124] DMA32 zone: 474479 pages, LIFO batch:63
[ 0.043213] Normal zone: 24576 pages used for memmap
[ 0.043214] Normal zone: 1572864 pages, LIFO batch:63
[ 0.122400] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.122789] ACPI: PM-Timer IO Port: 0x408
[ 0.122793] ACPI: Local APIC address 0xfee00000
[ 0.122806] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.122808] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.122810] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.122811] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.122848] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[ 0.122852] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.122855] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.122858] ACPI: IRQ0 used by override.
[ 0.122860] ACPI: IRQ9 used by override.
[ 0.122864] Using ACPI (MADT) for SMP configuration information
[ 0.122866] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.122880] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.122924] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.122927] PM: Registered nosave memory: [mem 0x0003e000-0x0003ffff]
[ 0.122930] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.122933] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[ 0.122936] PM: Registered nosave memory: [mem 0x6ec8a000-0x6ec8afff]
[ 0.122939] PM: Registered nosave memory: [mem 0x6ec9a000-0x6ec9afff]
[ 0.122942] PM: Registered nosave memory: [mem 0x7620a000-0x79a55fff]
[ 0.122946] PM: Registered nosave memory: [mem 0x79aac000-0x79ac5fff]
[ 0.122947] PM: Registered nosave memory: [mem 0x79ac6000-0x79ef3fff]
[ 0.122950] PM: Registered nosave memory: [mem 0x7a778000-0x7a823fff]
[ 0.122953] PM: Registered nosave memory: [mem 0x7ac00000-0x7fffffff]
[ 0.122955] PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]
[ 0.122956] PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
[ 0.122958] PM: Registered nosave memory: [mem 0xd1000000-0xd3708fff]
[ 0.122959] PM: Registered nosave memory: [mem 0xd3709000-0xd3709fff]
[ 0.122960] PM: Registered nosave memory: [mem 0xd370a000-0xdfffffff]
[ 0.122962] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.122963] PM: Registered nosave memory: [mem 0xf0000000-0xfe041fff]
[ 0.122964] PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
[ 0.122966] PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
[ 0.122967] PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
[ 0.122968] PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
[ 0.122969] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.122971] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.122972] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.122973] PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
[ 0.122975] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.122976] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.122977] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.122981] [mem 0x80000000-0xcfffffff] available for PCI devices
[ 0.122983] Booting paravirtualized kernel on bare hardware
[ 0.122988] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.333823] random: get_random_bytes called from start_kernel+0x95/0x548 with crng_init=0
[ 0.333839] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.334323] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u524288
[ 0.334338] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
[ 0.334340] pcpu-alloc: [0] 0 1 2 3
[ 0.334379] Built 1 zonelists, mobility grouping on. Total pages: 2019262
[ 0.334381] Policy zone: Normal
[ 0.334385] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=37bcaca0-6b49-4ca7-baea-faaf975dd8b2 rw
[ 0.346463] Calgary: detecting Calgary via BIOS EBDA area
[ 0.346467] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.387333] Memory: 7939520K/8205352K available (12293K kernel code, 1268K rwdata, 3688K rodata, 1536K init, 3936K bss, 265832K reserved, 0K cma-reserved)
[ 0.387767] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.387780] Kernel/User page tables isolation: enabled
[ 0.387808] ftrace: allocating 35810 entries in 140 pages
[ 0.409722] rcu: Preemptible hierarchical RCU implementation.
[ 0.409725] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.409727] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.409728] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.409730] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.409732] Tasks RCU enabled.
[ 0.409733] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.409735] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.412955] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 16
[ 0.413188] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.413348] Console: colour dummy device 80x25
[ 0.413355] printk: console [tty0] enabled
[ 0.413395] ACPI: Core revision 20181003
[ 0.413821] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[ 0.413859] hpet clockevent registered
[ 0.413920] APIC: Switch to symmetric I/O mode setup
[ 0.413924] DMAR: Host address width 39
[ 0.413926] DMAR: DRHD base: 0x000000fed64000 flags: 0x0
[ 0.413936] DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 9e2ff0505e
[ 0.413938] DMAR: DRHD base: 0x000000fed65000 flags: 0x1
[ 0.413947] DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.413950] DMAR: RMRR base: 0x000000799f4000 end: 0x00000079a13fff
[ 0.413952] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[ 0.413957] DMAR-IR: IOAPIC id 1 under DRHD base 0xfed65000 IOMMU 1
[ 0.413959] DMAR-IR: HPET id 0 under DRHD base 0xfed65000
[ 0.413961] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.415970] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.415972] x2apic enabled
[ 0.415994] Switched APIC routing to cluster x2apic.
[ 0.420694] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.437212] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x159647815e3, max_idle_ns: 440795269835 ns
[ 0.437237] Calibrating delay loop (skipped), value calculated using timer frequency.. 2996.00 BogoMIPS (lpj=4992000)
[ 0.437242] pid_max: default: 32768 minimum: 301
[ 0.438574] LSM: Security Framework initializing
[ 0.438577] Yama: becoming mindful.
[ 0.438588] AppArmor: AppArmor disabled by boot time parameter
[ 0.440924] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.442084] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.442161] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.442198] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.442641] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 0.442656] mce: CPU supports 7 MCE banks
[ 0.442688] CPU0: Thermal monitoring enabled (TM1)
[ 0.442744] process: using mwait in idle threads
[ 0.442749] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.442750] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.442755] Spectre V2 : Mitigation: Enhanced IBRS
[ 0.442757] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.442772] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.442774] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.443119] Freeing SMP alternatives memory: 28K
[ 0.445620] TSC deadline timer enabled
[ 0.445629] smpboot: CPU0: Intel(R) Celeron(R) J4105 CPU @ 1.50GHz (family: 0x6, model: 0x7a, stepping: 0x1)
[ 0.463916] Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.463943] ... version: 4
[ 0.463944] ... bit width: 48
[ 0.463945] ... generic registers: 4
[ 0.463946] ... value mask: 0000ffffffffffff
[ 0.463947] ... max period: 00007fffffffffff
[ 0.463948] ... fixed-purpose events: 3
[ 0.463950] ... event mask: 000000070000000f
[ 0.470578] rcu: Hierarchical SRCU implementation.
[ 0.494028] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.500588] smp: Bringing up secondary CPUs ...
[ 0.540597] x86: Booting SMP configuration:
[ 0.540599] .... node #0, CPUs: #1
[ 0.003917] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 0.580581] #2
[ 0.003917] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 0.620581] #3
[ 0.003917] x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
[ 0.622647] smp: Brought up 1 node, 4 CPUs
[ 0.622647] smpboot: Max logical packages: 1
[ 0.622647] smpboot: Total of 4 processors activated (11985.00 BogoMIPS)
[ 0.624556] devtmpfs: initialized
[ 0.624556] x86/mm: Memory block size: 128MB
[ 0.625334] PM: Registering ACPI NVS region [mem 0x79aac000-0x79ac5fff] (106496 bytes)
[ 0.625334] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.625334] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.625334] pinctrl core: initialized pinctrl subsystem
[ 0.625334] RTC time: 14:38:32, date: 02/02/19
[ 0.627346] NET: Registered protocol family 16
[ 0.627496] audit: initializing netlink subsys (disabled)
[ 0.627508] audit: type=2000 audit(1549118312.213:1): state=initialized audit_enabled=0 res=1
[ 0.627508] cpuidle: using governor ladder
[ 0.633923] cpuidle: using governor menu
[ 0.633947] ACPI: bus type PCI registered
[ 0.633951] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.634090] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.634094] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.634121] PCI: Using configuration type 1 for base access
[ 0.636058] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.636058] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.636058] ACPI: Added _OSI(Module Device)
[ 0.636058] ACPI: Added _OSI(Processor Device)
[ 0.636058] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.636058] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.636058] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.636058] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.652464] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.661861] ACPI: Dynamic OEM Table Load:
[ 0.661872] ACPI: SSDT 0xFFFF999BF63EA800 000190 (v02 PmRef Cpu0Cst 00003001 INTL 20160930)
[ 0.662868] ACPI: Dynamic OEM Table Load:
[ 0.662876] ACPI: SSDT 0xFFFF999BF63EAA00 0001E6 (v02 PmRef ApIst 00003000 INTL 20160930)
[ 0.663407] ACPI: Dynamic OEM Table Load:
[ 0.663415] ACPI: SSDT 0xFFFF999BF62B4600 0000C9 (v02 PmRef ApCst 00003000 INTL 20160930)
[ 0.665866] ACPI: Interpreter enabled
[ 0.665921] ACPI: (supports S0 S3 S4 S5)
[ 0.665923] ACPI: Using IOAPIC for interrupt routing
[ 0.665994] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.666581] ACPI: Enabled 11 GPEs in block 00 to 7F
[ 0.678033] ACPI: Power Resource [WRST] (on)
[ 0.685522] ACPI: Power Resource [FN00] (on)
[ 0.687271] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.687282] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.689362] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.689662] acpi PNP0A08:00: host bridge window [mem 0x1000000010000 window] (ignored, not CPU addressable)
[ 0.691167] PCI host bridge to bus 0000:00
[ 0.691171] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.691173] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.691176] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.691178] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.691180] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.691182] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.691184] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.691186] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
[ 0.691188] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff window]
[ 0.691191] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
[ 0.691193] pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff window]
[ 0.691195] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff window]
[ 0.691197] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff window]
[ 0.691199] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff window]
[ 0.691201] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff window]
[ 0.691203] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff window]
[ 0.691205] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff window]
[ 0.691207] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff window]
[ 0.691209] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff window]
[ 0.691212] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.691241] pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
[ 0.691866] pci 0000:00:02.0: [8086:3185] type 00 class 0x030000
[ 0.691884] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[ 0.691894] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.691900] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.691926] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.692576] pci 0000:00:0e.0: [8086:3198] type 00 class 0x040300
[ 0.692607] pci 0000:00:0e.0: reg 0x10: [mem 0xa1410000-0xa1413fff 64bit]
[ 0.692635] pci 0000:00:0e.0: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit]
[ 0.692703] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[ 0.693780] pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000
[ 0.693839] pci 0000:00:0f.0: reg 0x10: [mem 0xa1423000-0xa1423fff 64bit]
[ 0.693979] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.694560] pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601
[ 0.694589] pci 0000:00:12.0: reg 0x10: [mem 0xa1414000-0xa1415fff]
[ 0.694601] pci 0000:00:12.0: reg 0x14: [mem 0xa1422000-0xa14220ff]
[ 0.694611] pci 0000:00:12.0: reg 0x18: [io 0xf090-0xf097]
[ 0.694623] pci 0000:00:12.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.694636] pci 0000:00:12.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.694650] pci 0000:00:12.0: reg 0x24: [mem 0xa1421000-0xa14217ff]
[ 0.694704] pci 0000:00:12.0: PME# supported from D3hot
[ 0.695254] pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400
[ 0.695384] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 0.695963] pci 0000:00:14.0: [8086:31d6] type 01 class 0x060400
[ 0.696054] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[ 0.696611] pci 0000:00:14.1: [8086:31d7] type 01 class 0x060400
[ 0.696703] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
[ 0.697274] pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
[ 0.697303] pci 0000:00:15.0: reg 0x10: [mem 0xa1400000-0xa140ffff 64bit]
[ 0.697410] pci 0000:00:15.0: PME# supported from D3hot D3cold
[ 0.697980] pci 0000:00:17.0: [8086:31b4] type 00 class 0x118000
[ 0.698012] pci 0000:00:17.0: reg 0x10: [mem 0xa1420000-0xa1420fff 64bit]
[ 0.698027] pci 0000:00:17.0: reg 0x18: [mem 0xa141f000-0xa141ffff 64bit]
[ 0.698615] pci 0000:00:17.1: [8086:31b6] type 00 class 0x118000
[ 0.698644] pci 0000:00:17.1: reg 0x10: [mem 0xa141e000-0xa141efff 64bit]
[ 0.698661] pci 0000:00:17.1: reg 0x18: [mem 0xa141d000-0xa141dfff 64bit]
[ 0.699250] pci 0000:00:17.2: [8086:31b8] type 00 class 0x118000
[ 0.699283] pci 0000:00:17.2: reg 0x10: [mem 0xa141c000-0xa141cfff 64bit]
[ 0.699299] pci 0000:00:17.2: reg 0x18: [mem 0xa141b000-0xa141bfff 64bit]
[ 0.699891] pci 0000:00:17.3: [8086:31ba] type 00 class 0x118000
[ 0.699924] pci 0000:00:17.3: reg 0x10: [mem 0xa141a000-0xa141afff 64bit]
[ 0.699941] pci 0000:00:17.3: reg 0x18: [mem 0xa1419000-0xa1419fff 64bit]
[ 0.700585] pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501
[ 0.700620] pci 0000:00:1c.0: reg 0x10: [mem 0xa1418000-0xa1418fff 64bit]
[ 0.700637] pci 0000:00:1c.0: reg 0x18: [mem 0xa1417000-0xa1417fff 64bit]
[ 0.701287] pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100
[ 0.701981] pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
[ 0.702071] pci 0000:00:1f.1: reg 0x10: [mem 0xa1416000-0xa14160ff 64bit]
[ 0.702152] pci 0000:00:1f.1: reg 0x20: [io 0xf040-0xf05f]
[ 0.702971] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
[ 0.703006] pci 0000:01:00.0: reg 0x10: [mem 0xa1300000-0xa1303fff 64bit]
[ 0.703214] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:13.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[ 0.703438] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.703445] pci 0000:00:13.0: bridge window [mem 0xa1300000-0xa13fffff]
[ 0.703518] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.703551] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.703597] pci 0000:02:00.0: reg 0x18: [mem 0xa1204000-0xa1204fff 64bit]
[ 0.703615] pci 0000:02:00.0: reg 0x20: [mem 0xa1200000-0xa1203fff 64bit pref]
[ 0.703637] pci 0000:02:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
[ 0.703643] pci 0000:02:00.0: Max Payload Size set to 128 (was 128, max 128)
[ 0.703736] pci 0000:02:00.0: supports D1 D2
[ 0.703738] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.703891] pci 0000:00:14.0: PCI bridge to [bus 02]
[ 0.703896] pci 0000:00:14.0: bridge window [io 0xe000-0xefff]
[ 0.703901] pci 0000:00:14.0: bridge window [mem 0xa1200000-0xa12fffff]
[ 0.703973] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.704005] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.704034] pci 0000:03:00.0: reg 0x18: [mem 0xa1104000-0xa1104fff 64bit]
[ 0.704051] pci 0000:03:00.0: reg 0x20: [mem 0xa1100000-0xa1103fff 64bit pref]
[ 0.704088] pci 0000:03:00.0: Upstream bridge's Max Payload Size set to 128 (was 256, max 256)
[ 0.704095] pci 0000:03:00.0: Max Payload Size set to 128 (was 128, max 128)
[ 0.704187] pci 0000:03:00.0: supports D1 D2
[ 0.704189] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.704338] pci 0000:00:14.1: PCI bridge to [bus 03]
[ 0.704343] pci 0000:00:14.1: bridge window [io 0xd000-0xdfff]
[ 0.704347] pci 0000:00:14.1: bridge window [mem 0xa1100000-0xa11fffff]
[ 0.705821] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.705992] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.706159] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.706327] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 10 11 12 14 15)
[ 0.706497] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *7
[ 0.706668] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *9
[ 0.706845] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.707012] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.708048] gpio gpiochip1: (INT3453:01): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[ 0.708048] gpio gpiochip2: (INT3453:02): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[ 0.708048] gpio gpiochip3: (INT3453:03): detected irqchip that is shared with multiple gpiochips: please fix the driver.
[ 0.710563] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.710567] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.710573] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.710574] vgaarb: loaded
[ 0.710809] ACPI: bus type USB registered
[ 0.710836] usbcore: registered new interface driver usbfs
[ 0.710848] usbcore: registered new interface driver hub
[ 0.710900] usbcore: registered new device driver usb
[ 0.710947] pps_core: LinuxPPS API ver. 1 registered
[ 0.710948] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.710953] PTP clock support registered
[ 0.710964] EDAC MC: Ver: 3.0.0
[ 0.711216] Registered efivars operations
[ 0.737595] PCI: Using ACPI for IRQ routing
[ 0.767478] PCI: pci_cache_line_size set to 64 bytes
[ 0.767825] e820: reserve RAM buffer [mem 0x0003e000-0x0003ffff]
[ 0.767827] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.767829] e820: reserve RAM buffer [mem 0x6ec8a018-0x6fffffff]
[ 0.767830] e820: reserve RAM buffer [mem 0x7620a000-0x77ffffff]
[ 0.767832] e820: reserve RAM buffer [mem 0x79aac000-0x7bffffff]
[ 0.767834] e820: reserve RAM buffer [mem 0x7a778000-0x7bffffff]
[ 0.767835] e820: reserve RAM buffer [mem 0x7ac00000-0x7bffffff]
[ 0.768027] NetLabel: Initializing
[ 0.768029] NetLabel: domain hash size = 128
[ 0.768030] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.768053] NetLabel: unlabeled traffic allowed by default
[ 0.768263] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.768270] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[ 0.771603] clocksource: Switched to clocksource tsc-early
[ 0.792724] VFS: Disk quotas dquot_6.6.0
[ 0.792757] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.792902] pnp: PnP ACPI init
[ 0.793253] system 00:00: [io 0x0a00-0x0a07] has been reserved
[ 0.793263] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.794039] pnp 00:01: [dma 0 disabled]
[ 0.794125] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.794838] pnp 00:02: [dma 0 disabled]
[ 0.794918] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.795000] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.795003] system 00:03: [io 0x0400-0x047f] could not be reserved
[ 0.795005] system 00:03: [io 0x0500-0x05fe] has been reserved
[ 0.795008] system 00:03: [io 0x0600-0x061f] has been reserved
[ 0.795011] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.795018] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.795498] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.795501] system 00:04: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.795504] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.795506] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.795509] system 00:04: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.795511] system 00:04: [mem 0xfed08000-0xfed09fff] has been reserved
[ 0.795513] system 00:04: [mem 0xfed80000-0xfedbffff] has been reserved
[ 0.795516] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.795518] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.795525] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.795987] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.796399] pnp: PnP ACPI: found 6 devices
[ 0.803959] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.804000] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.804013] pci 0000:00:13.0: bridge window [mem 0xa1300000-0xa13fffff]
[ 0.804022] pci 0000:00:14.0: PCI bridge to [bus 02]
[ 0.804026] pci 0000:00:14.0: bridge window [io 0xe000-0xefff]
[ 0.804031] pci 0000:00:14.0: bridge window [mem 0xa1200000-0xa12fffff]
[ 0.804039] pci 0000:00:14.1: PCI bridge to [bus 03]
[ 0.804042] pci 0000:00:14.1: bridge window [io 0xd000-0xdfff]
[ 0.804048] pci 0000:00:14.1: bridge window [mem 0xa1100000-0xa11fffff]
[ 0.804058] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.804061] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.804063] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.804065] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.804068] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.804070] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.804072] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.804074] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[ 0.804077] pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window]
[ 0.804079] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window]
[ 0.804081] pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window]
[ 0.804083] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window]
[ 0.804085] pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window]
[ 0.804087] pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window]
[ 0.804089] pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window]
[ 0.804092] pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window]
[ 0.804094] pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window]
[ 0.804096] pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window]
[ 0.804098] pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window]
[ 0.804101] pci_bus 0000:01: resource 1 [mem 0xa1300000-0xa13fffff]
[ 0.804104] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.804106] pci_bus 0000:02: resource 1 [mem 0xa1200000-0xa12fffff]
[ 0.804109] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.804111] pci_bus 0000:03: resource 1 [mem 0xa1100000-0xa11fffff]
[ 0.804316] NET: Registered protocol family 2
[ 0.804595] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.804658] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.804891] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.805153] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.805214] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.805256] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.805354] NET: Registered protocol family 1
[ 0.805363] NET: Registered protocol family 44
[ 0.805378] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.806011] PCI: CLS 64 bytes, default 64
[ 0.806086] Unpacking initramfs...
[ 1.074191] Freeing initrd memory: 11416K
[ 1.093947] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.093951] software IO TLB: mapped [mem 0x6ac89000-0x6ec89000] (64MB)
[ 1.094001] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x159647815e3, max_idle_ns: 440795269835 ns
[ 1.094027] clocksource: Switched to clocksource tsc
[ 1.094186] check: Scanning for low memory corruption every 60 seconds
[ 1.095163] Initialise system trusted keyrings
[ 1.095183] Key type blacklist registered
[ 1.095277] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 1.097978] zbud: loaded
[ 1.170260] Key type asymmetric registered
[ 1.170263] Asymmetric key parser 'x509' registered
[ 1.170287] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 1.170363] io scheduler noop registered
[ 1.170364] io scheduler deadline registered
[ 1.170436] io scheduler cfq registered (default)
[ 1.170438] io scheduler mq-deadline registered
[ 1.170440] io scheduler kyber registered
[ 1.170523] io scheduler bfq registered
[ 1.171358] pcieport 0000:00:13.0: Signaling PME with IRQ 122
[ 1.171711] pcieport 0000:00:14.0: Signaling PME with IRQ 123
[ 1.172031] pcieport 0000:00:14.1: Signaling PME with IRQ 124
[ 1.172112] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.172244] efifb: probing for efifb
[ 1.172274] efifb: framebuffer at 0x90000000, using 8100k, total 8100k
[ 1.172276] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 1.172277] efifb: scrolling: redraw
[ 1.172279] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.172365] fbcon: Deferring console take-over
[ 1.172367] fb0: EFI VGA frame buffer device
[ 1.172384] intel_idle: MWAIT substates: 0x11242020
[ 1.172386] intel_idle: v0.4.1 model 0x7A
[ 1.172766] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.172876] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.172900] ACPI: Power Button [PWRB]
[ 1.178634] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.178636] ACPI: Thermal Zone [TZ01] (39 C)
[ 1.178981] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.200166] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.221468] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.223637] nvme nvme0: pci function 0000:01:00.0
[ 1.223702] usbcore: registered new interface driver usbserial_generic
[ 1.223715] usbserial: USB Serial support registered for generic
[ 1.223753] rtc_cmos 00:05: RTC can wake from S4
[ 1.224749] rtc_cmos 00:05: registered as rtc0
[ 1.224780] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.224867] intel_pstate: Intel P-state driver initializing
[ 1.225325] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.226022] NET: Registered protocol family 10
[ 1.244041] Segment Routing with IPv6
[ 1.244079] NET: Registered protocol family 17
[ 1.244852] intel_rdt: Intel RDT L2 allocation detected
[ 1.244854] intel_rdt: Intel RDT L2DATA allocation detected
[ 1.244855] intel_rdt: Intel RDT L2CODE allocation detected
[ 1.244880] RAS: Correctable Errors collector initialized.
[ 1.244957] microcode: sig=0x706a1, pf=0x1, revision=0x28
[ 1.245167] microcode: Microcode Update Driver: v2.2.
[ 1.245190] sched_clock: Marking stable (1244572911, 584521)->(1256815078, -11657646)
[ 1.245745] registered taskstats version 1
[ 1.245761] Loading compiled-in X.509 certificates
[ 1.253772] Loaded X.509 cert 'Build time autogenerated kernel key: 74a5a057e5fda6fa409239220c77773d3f1f6cba'
[ 1.253814] zswap: loaded using pool lzo/zbud
[ 1.264524] Key type big_key registered
[ 1.265696] Magic number: 7:190:636
[ 1.265943] rtc_cmos 00:05: setting system clock to 2019-02-02 14:38:33 UTC (1549118313)
[ 1.438976] nvme nvme0: missing or invalid SUBNQN field.
[ 1.439056] nvme nvme0: Shutdown timeout set to 8 seconds
[ 1.488703] nvme0n1: p1 p2 p3
[ 1.490777] Freeing unused decrypted memory: 2040K
[ 1.491283] Freeing unused kernel image memory: 1536K
[ 1.507597] Write protecting the kernel read-only data: 18432k
[ 1.508843] Freeing unused kernel image memory: 2016K
[ 1.509169] Freeing unused kernel image memory: 408K
[ 1.526907] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.526971] x86/mm: Checking user space page tables
[ 1.539049] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.539051] Run /init as init process
[ 1.613529] fbcon: Taking over console
[ 1.613625] Console: switching to colour frame buffer device 240x67
[ 1.636856] Linux agpgart interface v0.103
[ 1.686316] VFIO - User Level meta-driver version: 0.3
[ 1.740233] [drm] GuC: No firmware known for this platform!
[ 1.740236] [drm] HuC: No firmware known for this platform!
[ 1.740714] checking generic (90000000 7e9000) vs hw (90000000 10000000)
[ 1.740715] fb0: switching to inteldrmfb from EFI VGA
[ 1.740744] Console: switching to colour dummy device 80x25
[ 1.740901] [drm] Replacing VGA console driver
[ 1.741003] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.741004] [drm] Driver supports precise vblank timestamp query.
[ 1.741112] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.741693] [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)
[ 2.023661] [drm] Initialized i915 1.6.0 20180921 for 0000:00:02.0 on minor 0
[ 2.025358] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.025723] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
[ 2.055842] random: fast init done
[ 2.058137] fbcon: inteldrmfb (fb0) is primary device
[ 2.089725] Console: switching to colour frame buffer device 240x67
[ 2.118764] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.293394] SCSI subsystem initialized
[ 2.300976] sdhci: Secure Digital Host Controller Interface driver
[ 2.300978] sdhci: Copyright(c) Pierre Ossman
[ 2.304377] libata version 3.00 loaded.
[ 2.308303] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 3)
[ 2.308772] mmc0: CQHCI version 5.10
[ 2.311297] ahci 0000:00:12.0: version 3.0
[ 2.311733] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.311735] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst
[ 2.311999] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 2.312006] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 2.312340] scsi host0: ahci
[ 2.312730] scsi host1: ahci
[ 2.312817] ata1: SATA max UDMA/133 abar m2048@0xa1421000 port 0xa1421100 irq 131
[ 2.312821] ata2: SATA max UDMA/133 abar m2048@0xa1421000 port 0xa1421180 irq 131
[ 2.313089] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 2.313095] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[ 2.313333] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[ 2.313335] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.313337] usb usb1: Product: xHCI Host Controller
[ 2.313338] usb usb1: Manufacturer: Linux 4.20.6-arch1-1-ARCH xhci-hcd
[ 2.313339] usb usb1: SerialNumber: 0000:00:15.0
[ 2.313502] hub 1-0:1.0: USB hub found
[ 2.313582] mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
[ 2.313602] hub 1-0:1.0: 9 ports detected
[ 2.315716] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 2.315721] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[ 2.315726] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
[ 2.315791] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
[ 2.315792] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.315794] usb usb2: Product: xHCI Host Controller
[ 2.315795] usb usb2: Manufacturer: Linux 4.20.6-arch1-1-ARCH xhci-hcd
[ 2.315796] usb usb2: SerialNumber: 0000:00:15.0
[ 2.315985] hub 2-0:1.0: USB hub found
[ 2.316001] hub 2-0:1.0: 7 ports detected
[ 2.627471] ata1: SATA link down (SStatus 4 SControl 300)
[ 2.627512] ata2: SATA link down (SStatus 4 SControl 300)
[ 2.643993] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 2.726971] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.788003] usb 1-1: New USB device found, idVendor=2013, idProduct=0258, bcdDevice= 1.00
[ 2.788006] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.788008] usb 1-1: Product: PCTV 461
[ 2.788009] usb 1-1: Manufacturer: PCTV
[ 2.788010] usb 1-1: SerialNumber: 0011401314
[ 2.835453] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 2.851293] systemd[1]: Detected architecture x86-64.
[ 2.858968] systemd[1]: Set hostname to <OdiH2>.
[ 2.910741] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2.917207] systemd[1]: /usr/lib/systemd/system/auditd.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/auditd.pid → /run/auditd.pid; please update the unit file accordingly.
[ 2.928381] usb 2-1: New USB device found, idVendor=1058, idProduct=25a1, bcdDevice=10.14
[ 2.928384] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2.928386] usb 2-1: Product: Elements 25A1
[ 2.928387] usb 2-1: Manufacturer: Western Digital
[ 2.928388] usb 2-1: SerialNumber: 575835314441384C37534648
[ 2.970412] systemd[1]: Reached target Remote File Systems.
[ 2.970980] systemd[1]: Listening on Journal Audit Socket.
[ 2.971206] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.973829] systemd[1]: Created slice User and Session Slice.
[ 2.974350] systemd[1]: Listening on LVM2 poll daemon socket.
[ 2.974647] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 2.994255] EXT4-fs (nvme0n1p2): re-mounted. Opts: data=ordered
[ 3.004664] random: lvm: uninitialized urandom read (4 bytes read)
[ 3.025005] random: systemd-random-: uninitialized urandom read (512 bytes read)
[ 3.047215] audit: type=1130 audit(1549118315.276:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.053932] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 3.098241] audit: type=1130 audit(1549118315.330:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.120470] audit: type=1130 audit(1549118315.350:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.126627] audit: type=1130 audit(1549118315.356:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.129816] systemd-journald[287]: Received request to flush runtime journal from PID 1
[ 3.195010] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.60
[ 3.195013] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.195015] usb 1-4: Product: USB2.0 Hub
[ 3.195755] hub 1-4:1.0: USB hub found
[ 3.195992] hub 1-4:1.0: 4 ports detected
[ 3.213482] audit: type=1130 audit(1549118315.443:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.252230] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[ 3.252288] i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
[ 3.264808] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 3.272323] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 3.282104] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.295096] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 3.295098] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 3.295099] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 3.295100] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 3.295101] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 3.304025] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 3.308495] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
[ 3.310409] scsi host2: usb-storage 2-1:1.0
[ 3.310519] usbcore: registered new interface driver usb-storage
[ 3.312742] libphy: r8169: probed
[ 3.313051] r8169 0000:02:00.0 eth0: RTL8168g/8111g, 00:1e:06:45:01:5c, XID 4c000800, IRQ 133
[ 3.313053] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.313326] cryptd: max_cpu_qlen set to 1000
[ 3.314606] usbcore: registered new interface driver uas
[ 3.315199] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 3.319257] idma64 idma64.3: Found Intel integrated DMA 64-bit
[ 3.328744] libphy: r8169: probed
[ 3.328880] media: Linux media interface: v0.10
[ 3.329216] r8169 0000:03:00.0 eth1: RTL8168g/8111g, 00:1e:06:45:01:5d, XID 4c000800, IRQ 135
[ 3.329218] r8169 0000:03:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.340898] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
[ 3.367554] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
[ 3.377979] SSE version of gcm_enc/dec engaged.
[ 3.384795] videodev: Linux video capture interface: v2.00
[ 3.389959] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.394261] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
[ 3.414183] em28xx 1-1:1.0: New device PCTV PCTV 461 @ 480 Mbps (2013:0258, interface 0, class 0)
[ 3.414186] em28xx 1-1:1.0: DVB interface 0 found: isoc
[ 3.420957] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
[ 3.435091] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 3.435094] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.435096] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.435097] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.435099] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 3.435100] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.435102] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 3.437907] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 3.447546] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
[ 3.460117] r8169 0000:03:00.0 enp3s0: renamed from eth1
[ 3.472071] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input3
[ 3.472134] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:0e.0/sound/card0/input4
[ 3.472190] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input5
[ 3.472244] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input6
[ 3.472304] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7
[ 3.472493] audit: type=1130 audit(1549118315.700:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.472505] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
[ 3.472685] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
[ 3.472783] em28xx 1-1:1.0: chip ID is em28178
[ 3.474228] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
[ 3.477251] usb 1-4.1: new full-speed USB device number 4 using xhci_hcd
[ 3.500915] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
[ 3.527545] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
[ 3.536117] audit: type=1130 audit(1549118315.766:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-nvme0n1p1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.554228] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
[ 3.569614] usb 1-4.1: New USB device found, idVendor=062a, idProduct=4101, bcdDevice=81.13
[ 3.569616] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.569618] usb 1-4.1: Product: 2.4G Keyboard Mouse
[ 3.569619] usb 1-4.1: Manufacturer: MOSART Semi.
[ 3.609699] audit: type=1130 audit(1549118315.840:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 3.613048] intel_telemetry_core Init
[ 3.617534] audit: type=1127 audit(1549118315.850:10): pid=412 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[ 3.623668] Invalid pltconfig, ensure IPC1 device is enabled in BIOS
[ 3.641605] intel_rapl: Found RAPL domain package
[ 3.641608] intel_rapl: Found RAPL domain core
[ 3.641610] intel_rapl: Found RAPL domain uncore
[ 3.641612] intel_rapl: Found RAPL domain dram
[ 3.657527] usb 1-4.2: new high-speed USB device number 5 using xhci_hcd
[ 3.668811] Invalid pltconfig, ensure IPC1 device is enabled in BIOS
[ 3.748950] usb 1-4.2: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
[ 3.748952] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.748954] usb 1-4.2: Product: 802.11n WLAN NIC
[ 3.748956] usb 1-4.2: Manufacturer: Realtek
[ 3.752186] random: crng init done
[ 3.823922] usb 1-4.3: new full-speed USB device number 6 using xhci_hcd
[ 3.849845] em28xx 1-1:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x883c73a0
[ 3.849847] em28xx 1-1:1.0: EEPROM info:
[ 3.849849] em28xx 1-1:1.0: microcode start address = 0x0004, boot configuration = 0x01
[ 3.857363] em28xx 1-1:1.0: AC97 audio (5 sample rates)
[ 3.857365] em28xx 1-1:1.0: 500mA max power
[ 3.857367] em28xx 1-1:1.0: Table at offset 0x27, strings=0x148c, 0x1874, 0x0a6a
[ 3.917265] em28xx 1-1:1.0: Identified as PCTV DVB-S2 Stick (461e) (card=92)
[ 3.917269] em28xx 1-1:1.0: dvb set to isoc mode.
[ 3.917429] usbcore: registered new interface driver em28xx
[ 3.921094] usb 1-4.3: New USB device found, idVendor=24ae, idProduct=2010, bcdDevice= 1.10
[ 3.921097] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.921099] usb 1-4.3: Product: Rapoo 2.4G Wireless Device
[ 3.921100] usb 1-4.3: Manufacturer: RAPOO
[ 3.946241] em28xx 1-1:1.0: Binding DVB extension
[ 3.956238] i2c i2c-10: Added multiplexed i2c bus 11
[ 4.000622] usb 1-4.4: new full-speed USB device number 7 using xhci_hcd
[ 4.002105] ts2020 11-0060: Montage Technology TS2022 successfully identified
[ 4.006991] a8293 10-0008: Allegro A8293 SEC successfully attached
[ 4.007018] dvbdev: DVB: registering new adapter (1-1:1.0)
[ 4.007022] em28xx 1-1:1.0: DVB: registering adapter 0 frontend 0 (Montage Technology M88DS3103)...
[ 4.010675] em28xx 1-1:1.0: DVB extension successfully initialized
[ 4.010678] em28xx: Registered (Em28xx dvb Extension) extension
[ 4.020712] em28xx 1-1:1.0: Registering input extension
[ 4.050591] Registered IR keymap rc-pinnacle-pctv-hd
[ 4.050866] rc rc0: 1-1:1.0 IR as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1:1.0/rc/rc0
[ 4.050957] input: 1-1:1.0 IR as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1:1.0/rc/rc0/input10
[ 4.051056] rc rc0: lirc_dev: driver em28xx registered at minor = 0, scancode receiver, no transmitter
[ 4.051058] em28xx 1-1:1.0: Input extension successfully initialized
[ 4.051059] em28xx: Registered (Em28xx Input Extension) extension
[ 4.093318] usb 1-4.4: New USB device found, idVendor=046d, idProduct=c52f, bcdDevice=30.00
[ 4.093322] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.093323] usb 1-4.4: Product: USB Receiver
[ 4.093324] usb 1-4.4: Manufacturer: Logitech
[ 4.117435] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 4.119358] Generic PHY r8169-200:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[ 4.139599] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.167596] usbcore: registered new interface driver usbhid
[ 4.167598] usbhid: USB HID core driver
[ 4.184539] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:062A:4101.0001/input/input11
[ 4.240986] hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:15.0-4.1/input0
[ 4.241372] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:062A:4101.0002/input/input12
[ 4.241500] input: MOSART Semi. 2.4G Keyboard Mouse Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:062A:4101.0002/input/input13
[ 4.246167] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 4.246504] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.250923] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 4.251331] Generic PHY r8169-300:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 4.251628] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.263613] lib80211: common routines for IEEE802.11 drivers
[ 4.263615] lib80211_crypt: registered algorithm 'NULL'
[ 4.294996] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.297436] input: MOSART Semi. 2.4G Keyboard Mouse System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:062A:4101.0002/input/input14
[ 4.297578] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:062A:4101.0002/input/input15
[ 4.297897] hid-generic 0003:062A:4101.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:15.0-4.1/input1
[ 4.297904] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[ 4.298056] input: RAPOO Rapoo 2.4G Wireless Device as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.3/1-4.3:1.0/0003:24AE:2010.0003/input/input16
[ 4.298504] hid-generic 0003:24AE:2010.0003: input,hidraw2: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-0000:00:15.0-4.3/input0
[ 4.298729] input: RAPOO Rapoo 2.4G Wireless Device System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.3/1-4.3:1.1/0003:24AE:2010.0004/input/input18
[ 4.334706] scsi 2:0:0:0: Direct-Access WD Elements 25A1 1014 PQ: 0 ANSI: 6
[ 4.335285] scsi 2:0:0:0: Attached scsi generic sg0 type 0
[ 4.347731] sd 2:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
[ 4.347855] sd 2:0:0:0: [sda] 7813969920 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 4.347857] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 4.348105] sd 2:0:0:0: [sda] Write Protect is off
[ 4.348107] sd 2:0:0:0: [sda] Mode Sense: 47 00 10 08
[ 4.348310] sd 2:0:0:0: [sda] No Caching mode page found
[ 4.348315] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 4.354112] input: RAPOO Rapoo 2.4G Wireless Device Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.3/1-4.3:1.1/0003:24AE:2010.0004/input/input19
[ 4.354273] hid-generic 0003:24AE:2010.0004: input,hiddev1,hidraw3: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-0000:00:15.0-4.3/input1
[ 4.354501] input: RAPOO Rapoo 2.4G Wireless Device as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.3/1-4.3:1.2/0003:24AE:2010.0005/input/input20
[ 4.379812] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 4.380082] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 4.380087] cfg80211: failed to load regulatory.db
[ 4.380508] usbcore: registered new interface driver r8188eu
[ 4.396744] r8188eu 1-4.2:1.0 wlp0s21f0u4u2: renamed from wlan0
[ 4.411319] IPv6: ADDRCONF(NETDEV_UP): wlp0s21f0u4u2: link is not ready
[ 4.419072] hid-generic 0003:24AE:2010.0005: input,hidraw4: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-0000:00:15.0-4.3/input2
[ 4.419258] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.4/1-4.4:1.0/0003:046D:C52F.0006/input/input21
[ 4.421276] hid-generic 0003:046D:C52F.0006: input,hidraw5: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:15.0-4.4/input0
[ 4.421528] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:046D:C52F.0007/input/input22
[ 4.448607] sda: sda1
[ 4.449613] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.478345] hid-generic 0003:046D:C52F.0007: input,hiddev2,hidraw6: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:15.0-4.4/input1
[ 4.508644] mousedev: PS/2 mouse device common for all mice
[ 4.874326] MAC Address = 80:3f:5d:10:35:20
[ 4.875800] IPv6: ADDRCONF(NETDEV_UP): wlp0s21f0u4u2: link is not ready
[ 4.878209] R8188EU: indicate disassoc
[ 4.979078] IPv6: ADDRCONF(NETDEV_UP): wlp0s21f0u4u2: link is not ready
[ 5.048260] IPv6: ADDRCONF(NETDEV_UP): wlp0s21f0u4u2: link is not ready
[ 6.610172] fuse init (API version 7.28)
[ 6.790192] kauditd_printk_skb: 15 callbacks suppressed
[ 6.790194] audit: type=1130 audit(1549118319.020:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.135717] audit: type=1130 audit(1549118319.366:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.056233] R8188EU: assoc success
[ 8.310891] ucsi_acpi USBC000:00: failed to reset PPM!
[ 8.310906] ucsi_acpi USBC000:00: PPM init failed (-110)
[ 9.354943] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s21f0u4u2: link becomes ready
[ 14.019284] audit: type=1131 audit(1549118326.250:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 34.123182] audit: type=1131 audit(1549118346.353:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 158.072844] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[p37@OdiH2 ~]$
Liebe Grüße
p37