#1 16.05.2018 13:30:01

quiddi
Mitglied

[gelöst] b43 WLan Probleme

Tag zusammen,

ich habe Probleme meinen W-Lan/ Bluetooth (Broadcom BCM43228 802.11 a/b/g/n) Adapter zum laufen zu bekommen. Bei einer nackten Arch Installation bekomme ich beim starten folgende Fehler:

b43-phy ERROR: Firmware file "b43/ucode30_mimo.fw" not found
b43-phy ERROR: Firmware file b43-open/ucode30_mimo.fw not found

Daraufhin hatte ich über aur b43-firmware installiert und als Abhängigkeit installeirt mir aur noch b43-fwcutter. Neustart, jetzt läuft die Hardware an sich, jedoch braucht er eine gefühlte Ewigkeit um den Network Manager zu starten. In der dmesg finde ich folgendes:

[    4.929831] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[    4.930043] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21f1.hcd failed with error -2

Am Ende meines Beitrags findet ihr noch meine komplette dmesg. Die fehlende Datei hatte ich mal von https://github.com/winterheart/broadcom … c-21f1.hcd heruntergeladen und manuell in

/lib/firmware/brcm

reinkopiert. Auch dies ohne Erfolg. Laut der Webseite des b43-Projektes http://linuxwireless.sipsolutions.net/e … ivers/b43/ wird meine Karte komplett unterstützt.

Weiß von euch eienr vll. was?

Schönen Gruß und Danke

Hier meine komplette dmesg:

[    0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21
[    0.000000] Linux version 4.16.8-1-ARCH (builduser@heftig-7043) (gcc version 8.1.0 (GCC)) #1 SMP PREEMPT Wed May 9 11:25:02 UTC 2018
[    0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=LABEL=p_arch rw
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000097fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000098000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009cb7efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009cb7f000-0x000000009de7efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009de7f000-0x000000009df7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009df7f000-0x000000009dffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009dfff000-0x000000009dffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff810000-0x00000000ff82efff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x91b7e018-0x91b8e057] usable ==> usable
[    0.000000] e820: update [mem 0x91b7e018-0x91b8e057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000097fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000098000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000091b7e017] usable
[    0.000000] reserve setup_data: [mem 0x0000000091b7e018-0x0000000091b8e057] usable
[    0.000000] reserve setup_data: [mem 0x0000000091b8e058-0x000000009cb7efff] usable
[    0.000000] reserve setup_data: [mem 0x000000009cb7f000-0x000000009de7efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009de7f000-0x000000009df7efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009df7f000-0x000000009dffefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000009dfff000-0x000000009dffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff810000-0x00000000ff82efff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000043fdfffff] usable
[    0.000000] efi: EFI v2.10 by HPQ
[    0.000000] efi:  ACPI=0x9dffe000  ACPI 2.0=0x9dffe014  SMBIOS=0x9d32e198
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP ProBook 640 G1/1993, BIOS L77 Ver. 01.20 07/17/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00FF800000 mask 7FFF800000 write-protect
[    0.000000]   1 base 0000000000 mask 7F80000000 write-back
[    0.000000]   2 base 0080000000 mask 7FE0000000 write-back
[    0.000000]   3 base 009F000000 mask 7FFF000000 uncachable
[    0.000000]   4 base 0100000000 mask 7F00000000 write-back
[    0.000000]   5 base 0200000000 mask 7E00000000 write-back
[    0.000000]   6 base 0400000000 mask 7FC0000000 write-back
[    0.000000]   7 base 043FE00000 mask 7FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000000] e820: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 77000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x20c655000, 0x20c655fff] PGTABLE
[    0.000000] BRK [0x20c656000, 0x20c656fff] PGTABLE
[    0.000000] BRK [0x20c657000, 0x20c657fff] PGTABLE
[    0.000000] BRK [0x20c658000, 0x20c658fff] PGTABLE
[    0.000000] BRK [0x20c659000, 0x20c659fff] PGTABLE
[    0.000000] BRK [0x20c65a000, 0x20c65afff] PGTABLE
[    0.000000] BRK [0x20c65b000, 0x20c65bfff] PGTABLE
[    0.000000] BRK [0x20c65c000, 0x20c65cfff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x7f70e000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009DFFE014 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x000000009DFFE120 0000A4 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009DFFC000 00010C (v05 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: DSDT 0x000000009DFD2000 024BB9 (v02 HPQOEM 1993     00000001 INTL 20110112)
[    0.000000] ACPI: FACS 0x000000009DE31000 000040
[    0.000000] ACPI: FACS 0x000000009DE31000 000040
[    0.000000] ACPI: HPET 0x000000009DFFB000 000038 (v01 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: APIC 0x000000009DFFA000 0000BC (v01 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 0x000000009DFF9000 00003C (v01 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: ASF! 0x000000009DFF8000 0000A5 (v32 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: TCPA 0x000000009DFF7000 000032 (v02 HPQOEM 1993     00000000 HP   00000001)
[    0.000000] ACPI: SSDT 0x000000009DFCF000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x000000009DFCE000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[    0.000000] ACPI: SLIC 0x000000009DFCD000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.000000] ACPI: MSDM 0x000000009DFCC000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP   00000001)
[    0.000000] ACPI: FPDT 0x000000009DFCB000 000044 (v01 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: BGRT 0x000000009DFCA000 000038 (v00 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 0x000000009DFC6000 000544 (v01 PmRef  Cpu0Ist  00003000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x000000009DFC5000 000AF3 (v01 PmRef  CpuPm    00003000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x000000009DFC4000 0001D5 (v01 PmRef  LakeTiny 00003000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x000000009DFC3000 000706 (v01 SaSsdt SaSsdt   00003000 INTL 20110112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43fdfc000-0x43fdfffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000097fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000009cb7efff]
[    0.000000]   node   0: [mem 0x000000009dfff000-0x000000009dffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fdfffff]
[    0.000000] On node 0 totalpages: 4049174
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 1072 pages reserved
[    0.000000]   DMA zone: 3990 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9966 pages used for memmap
[    0.000000]   DMA32 zone: 637824 pages, LIFO batch:31
[    0.000000]   Normal zone: 53240 pages used for memmap
[    0.000000]   Normal zone: 3407360 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 100 pages
[    0.000000] Reserving Intel graphics memory at [mem 0x9f200000-0xbf1fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x91b7e000-0x91b7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x91b8e000-0x91b8efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cb7f000-0x9de7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9de7f000-0x9df7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9df7f000-0x9dffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9f1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9f200000-0xbf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff80ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff810000-0xff82efff]
[    0.000000] PM: Registered nosave memory: [mem 0xff82f000-0xffffffff]
[    0.000000] e820: [mem 0xbf200000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x4da with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 3984832
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=LABEL=p_arch rw
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 15749096K/16196696K available (10252K kernel code, 1262K rwdata, 3404K rodata, 1460K init, 640K bss, 447600K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 31738 entries in 124 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000]  RCU priority boosting: priority 1 delay 500 ms.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.000000]  Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180105
[    0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.016666] tsc: Fast TSC calibration using PIT
[    0.019999] tsc: Detected 2494.312 MHz processor
[    0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f43ca33b3, max_idle_ns: 440795321532 ns
[    0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.48 BogoMIPS (lpj=8314373)
[    0.019999] pid_max: default: 32768 minimum: 301
[    0.029128] Security Framework initialized
[    0.029130] Yama: becoming mindful.
[    0.031424] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.032593] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.032642] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.032679] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.032875] CPU: Physical Processor ID: 0
[    0.032875] CPU: Processor Core ID: 0
[    0.032881] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.032881] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.032885] mce: CPU supports 7 MCE banks
[    0.032894] CPU0: Thermal monitoring enabled (TM1)
[    0.032904] process: using mwait in idle threads
[    0.032907] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.032908] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.032909] Spectre V2 : Mitigation: Full generic retpoline
[    0.032910] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.032910] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.033120] Freeing SMP alternatives memory: 24K
[    0.039016] TSC deadline timer enabled
[    0.039019] smpboot: CPU0: Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.050007] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.050042] ... version:                3
[    0.050042] ... bit width:              48
[    0.050043] ... generic registers:      4
[    0.050044] ... value mask:             0000ffffffffffff
[    0.050044] ... max period:             00007fffffffffff
[    0.050045] ... fixed-purpose events:   3
[    0.050046] ... event mask:             000000070000000f
[    0.056669] Hierarchical SRCU implementation.
[    0.076904] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.083336] smp: Bringing up secondary CPUs ...
[    0.113345] x86: Booting SMP configuration:
[    0.113346] .... node  #0, CPUs:      #1 #2 #3
[    0.173648] smp: Brought up 1 node, 4 CPUs
[    0.173648] smpboot: Max logical packages: 2
[    0.173648] smpboot: Total of 4 processors activated (19962.93 BogoMIPS)
[    0.177067] devtmpfs: initialized
[    0.177067] x86/mm: Memory block size: 128MB
[    0.177757] PM: Registering ACPI NVS region [mem 0x9de7f000-0x9df7efff] (1048576 bytes)
[    0.177757] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.177757] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.177757] pinctrl core: initialized pinctrl subsystem
[    0.177757] RTC time: 10:59:40, date: 05/16/18
[    0.177757] NET: Registered protocol family 16
[    0.177757] cpuidle: using governor ladder
[    0.183343] cpuidle: using governor menu
[    0.183371] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.183372] ACPI: bus type PCI registered
[    0.183373] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.183437] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.183442] PCI: not using MMCONFIG
[    0.183442] PCI: Using configuration type 1 for base access
[    0.183445] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.184243] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.184243] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.184243] ACPI: Added _OSI(Module Device)
[    0.184243] ACPI: Added _OSI(Processor Device)
[    0.184243] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.184243] ACPI: Added _OSI(Processor Aggregator Device)
[    0.195232] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.202768] ACPI: Dynamic OEM Table Load:
[    0.202776] ACPI: SSDT 0xFFFF89A46DADB800 0003F3 (v01 PmRef  Cpu0Cst  00003001 INTL 20110112)
[    0.203306] ACPI: Dynamic OEM Table Load:
[    0.203312] ACPI: SSDT 0xFFFF89A46D8A5800 0005DB (v01 PmRef  ApIst    00003000 INTL 20110112)
[    0.203882] ACPI: Dynamic OEM Table Load:
[    0.203887] ACPI: SSDT 0xFFFF89A46DAB4600 000119 (v01 PmRef  ApCst    00003000 INTL 20110112)
[    0.205051] ACPI: EC: EC started
[    0.205052] ACPI: EC: interrupt blocked
[    1.693733] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    1.693736] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.693737] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    1.693738] ACPI: Interpreter enabled
[    1.693764] ACPI: (supports S0 S3 S4 S5)
[    1.693766] ACPI: Using IOAPIC for interrupt routing
[    1.693789] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    1.694254] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    1.694267] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.694574] ACPI: Enabled 7 GPEs in block 00 to 3F
[    1.696623] ACPI: Power Resource [APPR] (off)
[    1.699875] ACPI: Power Resource [COMP] (off)
[    1.700540] ACPI: Power Resource [LPP] (on)
[    1.704934] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.704939] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.707323] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    1.707324] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    1.708012] PCI host bridge to bus 0000:00
[    1.708015] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.708016] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.708017] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.708019] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window]
[    1.708020] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
[    1.708021] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window]
[    1.708022] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[    1.708024] pci_bus 0000:00: root bus resource [bus 00-fe]
[    1.708032] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    1.708169] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    1.708180] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[    1.708185] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.708189] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    1.708205] pci 0000:00:02.0: BAR 2: assigned to efifb
[    1.708338] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    1.708347] pci 0000:00:03.0: reg 0x10: [mem 0xd0730000-0xd0733fff 64bit]
[    1.708494] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    1.708513] pci 0000:00:14.0: reg 0x10: [mem 0xd0720000-0xd072ffff 64bit]
[    1.708569] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.708683] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    1.708704] pci 0000:00:16.0: reg 0x10: [mem 0xd0739000-0xd073900f 64bit]
[    1.708772] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.708885] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[    1.708903] pci 0000:00:19.0: reg 0x10: [mem 0xd0700000-0xd071ffff]
[    1.708911] pci 0000:00:19.0: reg 0x14: [mem 0xd073f000-0xd073ffff]
[    1.708919] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
[    1.708984] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    1.709097] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    1.709118] pci 0000:00:1a.0: reg 0x10: [mem 0xd073e000-0xd073e3ff]
[    1.709205] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.709319] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    1.709337] pci 0000:00:1b.0: reg 0x10: [mem 0xd0734000-0xd0737fff 64bit]
[    1.709401] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.709519] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    1.709598] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.709768] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[    1.709847] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    1.710012] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
[    1.710092] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    1.710258] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    1.710279] pci 0000:00:1d.0: reg 0x10: [mem 0xd073d000-0xd073d3ff]
[    1.710367] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.710483] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[    1.710701] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    1.710718] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
[    1.710725] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
[    1.710732] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
[    1.710740] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
[    1.710747] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    1.710754] pci 0000:00:1f.2: reg 0x24: [mem 0xd073c000-0xd073c7ff]
[    1.710796] pci 0000:00:1f.2: PME# supported from D3hot
[    1.710904] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    1.710920] pci 0000:00:1f.3: reg 0x10: [mem 0xd0738000-0xd07380ff 64bit]
[    1.710934] pci 0000:00:1f.3: reg 0x20: [io  0xef80-0xef9f]
[    1.711094] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.711099] pci 0000:00:1c.0:   bridge window [mem 0xd0600000-0xd06fffff]
[    1.711161] pci 0000:02:00.0: [14e4:4359] type 00 class 0x028000
[    1.711196] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0503fff 64bit]
[    1.711244] pci 0000:02:00.0: enabling Extended Tags
[    1.711335] pci 0000:02:00.0: supports D1 D2
[    1.711337] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.720026] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    1.720030] pci 0000:00:1c.6:   bridge window [mem 0xd0500000-0xd05fffff]
[    1.720095] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
[    1.720195] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd0400fff]
[    1.720655] pci 0000:03:00.0: supports D1 D2
[    1.720656] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    1.730033] pci 0000:00:1c.7: PCI bridge to [bus 03]
[    1.730038] pci 0000:00:1c.7:   bridge window [mem 0xd0400000-0xd04fffff]
[    1.731222] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.731284] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.731344] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.731404] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.731463] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.731524] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.731583] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.731642] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.732038] ACPI: EC: interrupt unblocked
[    1.732044] ACPI: EC: event unblocked
[    1.732050] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.732052] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    1.732111] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.732111] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.732111] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.732111] vgaarb: loaded
[    1.732111] EDAC MC: Ver: 3.0.0
[    1.732111] Registered efivars operations
[    1.862734] PCI: Using ACPI for IRQ routing
[    1.868294] PCI: pci_cache_line_size set to 64 bytes
[    1.868352] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    1.868353] e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]
[    1.868354] e820: reserve RAM buffer [mem 0x91b7e018-0x93ffffff]
[    1.868355] e820: reserve RAM buffer [mem 0x9cb7f000-0x9fffffff]
[    1.868356] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
[    1.868357] e820: reserve RAM buffer [mem 0x43fe00000-0x43fffffff]
[    1.868446] NetLabel: Initializing
[    1.868446] NetLabel:  domain hash size = 128
[    1.868447] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.868460] NetLabel:  unlabeled traffic allowed by default
[    1.868463] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.868463] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.870018] clocksource: Switched to clocksource tsc-early
[    1.879114] VFS: Disk quotas dquot_6.6.0
[    1.879133] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.879199] pnp: PnP ACPI init
[    1.879494] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.879497] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.879498] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.879500] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.879501] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.879503] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.879504] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.879506] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.879507] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.879509] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved
[    1.879514] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.879756] system 00:01: [io  0x0200-0x027f] has been reserved
[    1.879758] system 00:01: [io  0xffff] has been reserved
[    1.879760] system 00:01: [io  0xffff] has been reserved
[    1.879761] system 00:01: [io  0xffff] has been reserved
[    1.879762] system 00:01: [io  0x1800-0x18fe] has been reserved
[    1.879764] system 00:01: [io  0xef80-0xef9f] has been reserved
[    1.879768] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.879818] system 00:02: [io  0x0800-0x087f] has been reserved
[    1.879821] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.879843] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.880399] pnp 00:04: [dma 0 disabled]
[    1.880476] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[    1.880496] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    1.880515] pnp 00:06: Plug and Play ACPI device, IDs SYN3002 SYN0100 SYN0002 PNP0f13 (active)
[    1.880879] system 00:07: [mem 0x20000000-0x201fffff] could not be reserved
[    1.880881] system 00:07: [mem 0x40004000-0x40004fff] could not be reserved
[    1.880884] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.881143] pnp 00:08: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    1.881163] pnp: PnP ACPI: found 9 devices
[    1.887008] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.887033] pci 0000:00:1c.7: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    1.887035] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    1.887045] pci 0000:00:1c.7: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref]
[    1.887048] pci 0000:00:1c.7: BAR 13: assigned [io  0x2000-0x2fff]
[    1.887050] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.887056] pci 0000:00:1c.0:   bridge window [mem 0xd0600000-0xd06fffff]
[    1.887063] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    1.887068] pci 0000:00:1c.6:   bridge window [mem 0xd0500000-0xd05fffff]
[    1.887075] pci 0000:00:1c.7: PCI bridge to [bus 03]
[    1.887077] pci 0000:00:1c.7:   bridge window [io  0x2000-0x2fff]
[    1.887082] pci 0000:00:1c.7:   bridge window [mem 0xd0400000-0xd04fffff]
[    1.887086] pci 0000:00:1c.7:   bridge window [mem 0xbf300000-0xbf4fffff 64bit pref]
[    1.887092] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.887093] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.887094] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.887096] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window]
[    1.887097] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window]
[    1.887098] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window]
[    1.887100] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window]
[    1.887101] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
[    1.887103] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
[    1.887104] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    1.887105] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
[    1.887107] pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref]
[    1.887226] NET: Registered protocol family 2
[    1.887362] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    1.887411] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.887560] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.887668] TCP: Hash tables configured (established 131072 bind 65536)
[    1.887707] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    1.887745] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    1.887813] NET: Registered protocol family 1
[    1.887825] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.887834] pci 0000:00:14.0: enabling device (0000 -> 0002)
[    1.888656] PCI: CLS 64 bytes, default 64
[    1.888688] Unpacking initramfs...
[    1.996798] Freeing initrd memory: 9156K
[    1.996800] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.996803] software IO TLB [mem 0x953c4000-0x993c4000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    1.996914] Scanning for low memory corruption every 60 seconds
[    1.997394] Initialise system trusted keyrings
[    1.997403] Key type blacklist registered
[    1.997451] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    1.998485] zbud: loaded
[    1.999694] Key type asymmetric registered
[    1.999696] Asymmetric key parser 'x509' registered
[    1.999729] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.999762] io scheduler noop registered
[    1.999763] io scheduler deadline registered
[    1.999800] io scheduler cfq registered (default)
[    1.999801] io scheduler mq-deadline registered
[    1.999801] io scheduler kyber registered
[    1.999806] io scheduler bfq registered
[    2.000663] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    2.000684] pcieport 0000:00:1c.6: Signaling PME with IRQ 25
[    2.000702] pcieport 0000:00:1c.7: Signaling PME with IRQ 26
[    2.000720] pciehp 0000:00:1c.7:pcie004: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    2.000791] efifb: probing for efifb
[    2.000803] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[    2.000804] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    2.000804] efifb: scrolling: redraw
[    2.000806] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.002250] Console: switching to colour frame buffer device 128x48
[    2.003624] fb0: EFI VGA frame buffer device
[    2.003632] intel_idle: MWAIT substates: 0x42120
[    2.003633] intel_idle: v0.4.1 model 0x3C
[    2.003783] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.003847] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    2.003854] ACPI: Sleep Button [SLPB]
[    2.003884] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    2.003890] ACPI: Lid Switch [LID]
[    2.003919] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.003938] ACPI: Power Button [PWRF]
[    2.028686] thermal LNXTHERM:00: registered as thermal_zone0
[    2.028688] ACPI: Thermal Zone [CPUZ] (39 C)
[    2.052895] thermal LNXTHERM:01: registered as thermal_zone1
[    2.052898] ACPI: Thermal Zone [GFXZ] (0 C)
[    2.067980] thermal LNXTHERM:02: registered as thermal_zone2
[    2.067983] ACPI: Thermal Zone [EXTZ] (26 C)
[    2.083112] thermal LNXTHERM:03: registered as thermal_zone3
[    2.083114] ACPI: Thermal Zone [LOCZ] (31 C)
[    2.098281] thermal LNXTHERM:04: registered as thermal_zone4
[    2.098284] ACPI: Thermal Zone [BATZ] (20 C)
[    2.098692] thermal LNXTHERM:05: registered as thermal_zone5
[    2.098694] ACPI: Thermal Zone [PCHZ] (114 C)
[    2.098892] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.099879] intel_pstate: Intel P-state driver initializing
[    2.100046] ledtrig-cpu: registered to indicate activity on CPUs
[    2.100673] NET: Registered protocol family 10
[    2.109760] Segment Routing with IPv6
[    2.109811] NET: Registered protocol family 17
[    2.110426] RAS: Correctable Errors collector initialized.
[    2.110504] microcode: sig=0x306c3, pf=0x10, revision=0x24
[    2.110676] microcode: Microcode Update Driver: v2.2.
[    2.110699] sched_clock: Marking stable (2110663195, 0)->(2114155578, -3492383)
[    2.111243] registered taskstats version 1
[    2.111257] Loading compiled-in X.509 certificates
[    2.111303] zswap: loaded using pool lzo/zbud
[    2.115382] Key type big_key registered
[    2.115908]   Magic number: 2:697:982
[    2.115972] hctosys: unable to open rtc device (rtc0)
[    2.117851] Freeing unused kernel memory: 1460K
[    2.117853] Write protecting the kernel read-only data: 16384k
[    2.118382] Freeing unused kernel memory: 2016K
[    2.120258] Freeing unused kernel memory: 692K
[    2.414439] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.415682] i8042: Detected active multiplexing controller, rev 1.1
[    2.416801] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.416808] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.416810] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.416811] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.416813] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.422729] ACPI: bus type USB registered
[    2.422807] usbcore: registered new interface driver usbfs
[    2.422819] usbcore: registered new interface driver hub
[    2.422930] usbcore: registered new device driver usb
[    2.424399] SCSI subsystem initialized
[    2.429250] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.429477] ehci-pci: EHCI PCI platform driver
[    2.429507] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.429513] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.430054] libata version 3.00 loaded.
[    2.430581] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    2.430586] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.430808] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.430810] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.430812] usb usb1: Product: xHCI Host Controller
[    2.430814] usb usb1: Manufacturer: Linux 4.16.8-1-ARCH xhci-hcd
[    2.430815] usb usb1: SerialNumber: 0000:00:14.0
[    2.430950] hub 1-0:1.0: USB hub found
[    2.430968] hub 1-0:1.0: 14 ports detected
[    2.431902] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.431907] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.431957] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    2.431960] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.431961] usb usb2: Product: xHCI Host Controller
[    2.431963] usb usb2: Manufacturer: Linux 4.16.8-1-ARCH xhci-hcd
[    2.431964] usb usb2: SerialNumber: 0000:00:14.0
[    2.432089] hub 2-0:1.0: USB hub found
[    2.432105] hub 2-0:1.0: 6 ports detected
[    2.432564] usb: port power management may be unreliable
[    2.433376] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.433382] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.433394] ehci-pci 0000:00:1a.0: debug port 2
[    2.437426] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.437444] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd073e000
[    2.450022] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.450090] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.450092] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.450093] usb usb3: Product: EHCI Host Controller
[    2.450094] usb usb3: Manufacturer: Linux 4.16.8-1-ARCH ehci_hcd
[    2.450096] usb usb3: SerialNumber: 0000:00:1a.0
[    2.450219] hub 3-0:1.0: USB hub found
[    2.450225] hub 3-0:1.0: 2 ports detected
[    2.450588] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.450593] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    2.450604] ehci-pci 0000:00:1d.0: debug port 2
[    2.454496] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.454509] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000
[    2.462419] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.466678] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.466718] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    2.466720] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.466721] usb usb4: Product: EHCI Host Controller
[    2.466723] usb usb4: Manufacturer: Linux 4.16.8-1-ARCH ehci_hcd
[    2.466724] usb usb4: SerialNumber: 0000:00:1d.0
[    2.466912] hub 4-0:1.0: USB hub found
[    2.466918] hub 4-0:1.0: 2 ports detected
[    2.467110] ahci 0000:00:1f.2: version 3.0
[    2.467487] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.467524] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x35 impl SATA mode
[    2.467529] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[    2.498225] scsi host0: ahci
[    2.498626] scsi host1: ahci
[    2.498954] scsi host2: ahci
[    2.499254] scsi host3: ahci
[    2.499519] scsi host4: ahci
[    2.499781] scsi host5: ahci
[    2.499937] ata1: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c100 irq 29
[    2.499942] ata2: DUMMY
[    2.499948] ata3: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c200 irq 29
[    2.499951] ata4: DUMMY
[    2.499957] ata5: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c300 irq 29
[    2.499964] ata6: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c380 irq 29
[    2.760113] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    2.783441] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    2.800113] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    2.814624] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.815939] ata1.00: NCQ Send/Recv Log not supported
[    2.815945] ata1.00: ATA-9: Samsung SSD 840 Series, DXT06B0Q, max UDMA/133
[    2.815950] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.816074] ata1.00: READ LOG DMA EXT failed, trying PIO
[    2.816193] ata1.00: failed to get Identify Device Data, Emask 0x1
[    2.816903] ata1.00: NCQ Send/Recv Log not supported
[    2.816948] ata1.00: failed to get Identify Device Data, Emask 0x1
[    2.816956] ata1.00: configured for UDMA/133
[    2.827442] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  6B0Q PQ: 0 ANSI: 5
[    2.901891] usb 1-5: New USB device found, idVendor=138a, idProduct=003f
[    2.901899] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.901904] usb 1-5: SerialNumber: 00b07c01df94
[    2.930839] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
[    2.930847] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.931388] hub 3-1:1.0: USB hub found
[    2.931486] hub 3-1:1.0: 6 ports detected
[    2.947372] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
[    2.947379] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.947837] hub 4-1:1.0: USB hub found
[    2.948009] hub 4-1:1.0: 8 ports detected
[    3.010114] tsc: Refined TSC clocksource calibration: 2494.210 MHz
[    3.010139] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3dc117a2, max_idle_ns: 440795222026 ns
[    3.010200] clocksource: Switched to clocksource tsc
[    3.023450] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[    3.144334] ata3: SATA link down (SStatus 0 SControl 300)
[    3.218608] usb 1-7: New USB device found, idVendor=04ca, idProduct=7034
[    3.218616] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.218620] usb 1-7: Product: HP HD Webcam
[    3.218625] usb 1-7: Manufacturer: DDMDH02UI6S7C3
[    3.218628] usb 1-7: SerialNumber: 200901010001
[    3.343452] usb 1-12: new full-speed USB device number 4 using xhci_hcd
[    3.458010] ata5: SATA link down (SStatus 0 SControl 300)
[    3.486585] usb 1-12: New USB device found, idVendor=0a5c, idProduct=21f1
[    3.486591] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.486596] usb 1-12: Product: BCM20702A0
[    3.486600] usb 1-12: Manufacturer: Broadcom Corp
[    3.486603] usb 1-12: SerialNumber: 3010B3A53262
[    3.771358] ata6: SATA link down (SStatus 0 SControl 300)
[    3.782984] ata1.00: Enabling discard_zeroes_data
[    3.783220] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    3.783304] sd 0:0:0:0: [sda] Write Protect is off
[    3.783312] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.783421] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.783785] ata1.00: Enabling discard_zeroes_data
[    3.787584]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    3.788380] ata1.00: Enabling discard_zeroes_data
[    3.788797] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.813122] random: fast init done
[    3.957233] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.092282] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    4.107077] systemd[1]: Detected architecture x86-64.
[    4.113360] systemd[1]: Set hostname to <quiddi-hp-640>.
[    4.259847] random: systemd: uninitialized urandom read (16 bytes read)
[    4.259876] systemd[1]: Reached target Login Prompts.
[    4.265015] random: systemd: uninitialized urandom read (16 bytes read)
[    4.265046] systemd[1]: Reached target Remote File Systems.
[    4.265249] random: systemd: uninitialized urandom read (16 bytes read)
[    4.267539] systemd[1]: Created slice User and Session Slice.
[    4.267763] systemd[1]: Reached target Slices.
[    4.268064] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.268406] systemd[1]: Listening on udev Control Socket.
[    4.268773] systemd[1]: Listening on Journal Socket.
[    4.318124] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[    4.492865] systemd-journald[230]: Received request to flush runtime journal from PID 1
[    4.567104] ACPI: AC Adapter [AC] (on-line)
[    4.567246] input: HP Wireless hotkeys as /devices/virtual/input/input8
[    4.580509] ACPI: Battery Slot [BAT0] (battery absent)
[    4.624221] rtc_cmos 00:03: RTC can wake from S4
[    4.624467] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.624502] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    4.634842] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[    4.635623] hp_accel: hardware type HPB64xx found
[    4.637500] pps_core: LinuxPPS API ver. 1 registered
[    4.637501] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    4.640717] EDAC ie31200: No ECC support
[    4.640822] PTP clock support registered
[    4.653240] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.675713] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002)
[    4.675834] bcma: bus0: Found chip with id 43228, rev 0x00 and package 0x08
[    4.675863] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
[    4.675886] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
[    4.675932] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0)
[    4.675955] bcma: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0)
[    4.678512] media: Linux media interface: v0.10
[    4.678514] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    4.678516] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    4.680935] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20180105/utaddress-247)
[    4.680944] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.680952] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20180105/utaddress-247)
[    4.680958] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.681005] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20180105/utaddress-247)
[    4.681010] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20180105/utaddress-247)
[    4.681015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.681020] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20180105/utaddress-247)
[    4.681024] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20180105/utaddress-247)
[    4.681028] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20180105/utaddress-247)
[    4.681032] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000080F (\IO_T) (20180105/utaddress-247)
[    4.681037] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.681038] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.683363] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    4.685836] Linux agpgart interface v0.103
[    4.693050] parport_pc 00:04: reported by Plug and Play ACPI
[    4.693113] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[    4.696149] bcma: bus0: Bus registered
[    4.704354] Linux video capture interface: v2.00
[    4.760337] Bluetooth: Core ver 2.22
[    4.760355] NET: Registered protocol family 31
[    4.760355] Bluetooth: HCI device and connection manager initialized
[    4.760359] Bluetooth: HCI socket layer initialized
[    4.760362] Bluetooth: L2CAP socket layer initialized
[    4.760368] Bluetooth: SCO socket layer initialized
[    4.766059] lis3lv02d: 8 bits 3DC sensor found
[    4.779695] uvcvideo: Found UVC 1.00 device HP HD Webcam (04ca:7034)
[    4.783109] input: PC Speaker as /devices/platform/pcspkr/input/input12
[    4.788273] uvcvideo 1-7:1.0: Entity type for entity Extension 5 was not initialized!
[    4.788276] uvcvideo 1-7:1.0: Entity type for entity Extension 2 was not initialized!
[    4.788278] uvcvideo 1-7:1.0: Entity type for entity Processing 3 was not initialized!
[    4.788280] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
[    4.788474] input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input13
[    4.788618] usbcore: registered new interface driver uvcvideo
[    4.788619] USB Video Class driver (1.1.1)
[    4.790316] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    4.790318] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.790319] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.790320] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.790321] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.793486] usbcore: registered new interface driver btusb
[    4.804599] cryptd: max_cpu_qlen set to 1000
[    4.817360] AVX2 version of gcm_enc/dec engaged.
[    4.817361] AES CTR mode by8 optimization enabled
[    4.853184] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    4.911830] Bluetooth: hci0: BCM: chip id 63
[    4.912828] Bluetooth: hci0: BCM: features 0x07
[    4.928836] Bluetooth: hci0: BCM20702A
[    4.929831] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[    4.930043] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21f1.hcd failed with error -2
[    4.930046] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21f1.hcd not found
[    4.946986] ppdev: user-space parallel port driver
[    4.964017] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 34:64:a9:d5:5a:54
[    4.965187] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    4.965233] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    4.965279] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
[    4.968402] iTCO_vendor_support: vendor-support=0
[    4.972286] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.972345] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    4.973823] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.991019] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    4.991050] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    4.992918] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[    4.993171] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    4.993822] hp_wmi: query 0xd returned error 0x5
[    4.993876] input: HP WMI hotkeys as /devices/virtual/input/input14
[    5.032600] intel-spi intel-spi: mx25l12805d (16384 Kbytes)
[    5.034143] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[    5.034147] snd_hda_codec_idt hdaudioC1D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[    5.034149] snd_hda_codec_idt hdaudioC1D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    5.034150] snd_hda_codec_idt hdaudioC1D0:    mono: mono_out=0x0
[    5.034152] snd_hda_codec_idt hdaudioC1D0:    inputs:
[    5.034154] snd_hda_codec_idt hdaudioC1D0:      Mic=0xc
[    5.034156] snd_hda_codec_idt hdaudioC1D0:      Internal Mic=0x11
[    5.034157] snd_hda_codec_idt hdaudioC1D0:      Line=0xf
[    5.044370] Creating 1 MTD partitions on "intel-spi":
[    5.044374] 0x000000000000-0x000001000000 : "BIOS"
[    5.052686] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    5.081859] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    5.082510] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[    5.082566] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[    5.082621] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[    5.082676] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[    5.098138] intel_rapl: Found RAPL domain package
[    5.098141] intel_rapl: Found RAPL domain core
[    5.098142] intel_rapl: Found RAPL domain uncore
[    5.098143] intel_rapl: Found RAPL domain dram
[    5.107283] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    5.107286] fb: switching to inteldrmfb from EFI VGA
[    5.107346] Console: switching to colour dummy device 80x25
[    5.108042] [drm] Replacing VGA console driver
[    5.109227] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.109228] [drm] Driver supports precise vblank timestamp query.
[    5.109611] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.112849] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.114983] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.115014] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.115015] cfg80211: failed to load regulatory.db
[    5.135683] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[    5.194622] b43-phy0: Broadcom 43228 WLAN found (core revision 30)
[    5.195016] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16
[    5.195024] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1
[    5.195550] Broadcom 43xx driver loaded [ Features: PNLS ]
[    5.202702] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.204535] b43 bcma0:1 wlp2s0b1: renamed from wlan0
[    5.250179] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    5.473759] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    5.478017] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    5.513747] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826]
[    5.547001] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..]
[    5.547006] psmouse serio3: synaptics: Your touchpad (PNP: SYN3002 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    5.604467] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2758, fw id: 1530444
[    5.636777] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[    5.641856] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input11
[    5.646249] mousedev: PS/2 mouse device common for all mice
[    5.791001] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    6.000142] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[    6.126924] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input21
[    6.132570] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.133376] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input22
[    6.133707] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.153247] fbcon: inteldrmfb (fb0) is primary device
[    6.153428] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    6.250282] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[    6.961198] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[    6.961205] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[    6.961261] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[    7.259543] Console: switching to colour frame buffer device 200x56
[    7.284117] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.349520] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[    7.349572] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[    7.349633] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25
[    7.349686] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input26
[    7.349738] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input27
[   30.697553] random: crng init done
[   30.697558] random: 7 urandom warning(s) missed due to ratelimiting
[  351.253316] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[  351.406688] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  667.243303] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[  667.396816] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[  983.269889] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[  983.423323] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready

Beitrag geändert von quiddi (24.05.2018 11:58:16)

Offline

#2 16.05.2018 16:09:32

gast007
Gast

Re: [gelöst] b43 WLan Probleme

Probier mal den broadcom-wl aus den offiziellen repos aus.
https://wireless.wiki.kernel.org/en/use … ed_devices

#3 17.05.2018 11:51:33

Fossler69
Mitglied

Re: [gelöst] b43 WLan Probleme

Ich nutze die DKMS-Variante des broadcom Treibers (broadcom-wl-dkms). Das erspart mir die mit jedem Kernel-Update anfallende Neuinstallation des Standard-Treibers.

Offline

#4 18.05.2018 09:49:16

quiddi
Mitglied

Re: [gelöst] b43 WLan Probleme

Danke euch für eure Antworten. Leider bekomme ich das Teil trotzdem nicht zum laufen mit dem browdcom-wl und auch nicht mit broadcom-wl-dkms. Die dkms Variante hätte ich nett gefunden, wenn es geklappt hätte, gerade wegen des Kernel-Updates. Ich erhalte weiterhin:

[    4.929831] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[    4.930043] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21f1.hcd failed with error -2

Was ist denn der

[    5.114983] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.115014] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2

Hat das vll. was mit meinem W-Lan Problem zu tun?
An sich würde es mich auch gar nicht stören, dass halt das Bluetooth nicht geht. Aber das Teil braucht dann halt unheimlich lange zum booten.

Hier noch meine komplette dmesg:

[    0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21
[    0.000000] Linux version 4.16.8-1-ARCH (builduser@heftig-7043) (gcc version 8.1.0 (GCC)) #1 SMP PREEMPT Wed May 9 11:25:02 UTC 2018
[    0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=LABEL=p_arch rw
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000097fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000098000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009cb7efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009cb7f000-0x000000009de7efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009de7f000-0x000000009df7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009df7f000-0x000000009dffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009dfff000-0x000000009dffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff810000-0x00000000ff82efff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x91b7e018-0x91b8e057] usable ==> usable
[    0.000000] e820: update [mem 0x91b7e018-0x91b8e057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000097fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000098000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000091b7e017] usable
[    0.000000] reserve setup_data: [mem 0x0000000091b7e018-0x0000000091b8e057] usable
[    0.000000] reserve setup_data: [mem 0x0000000091b8e058-0x000000009cb7efff] usable
[    0.000000] reserve setup_data: [mem 0x000000009cb7f000-0x000000009de7efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009de7f000-0x000000009df7efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009df7f000-0x000000009dffefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000009dfff000-0x000000009dffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff810000-0x00000000ff82efff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000043fdfffff] usable
[    0.000000] efi: EFI v2.10 by HPQ
[    0.000000] efi:  ACPI=0x9dffe000  ACPI 2.0=0x9dffe014  SMBIOS=0x9d32e198
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP ProBook 640 G1/1993, BIOS L77 Ver. 01.20 07/17/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00FF800000 mask 7FFF800000 write-protect
[    0.000000]   1 base 0000000000 mask 7F80000000 write-back
[    0.000000]   2 base 0080000000 mask 7FE0000000 write-back
[    0.000000]   3 base 009F000000 mask 7FFF000000 uncachable
[    0.000000]   4 base 0100000000 mask 7F00000000 write-back
[    0.000000]   5 base 0200000000 mask 7E00000000 write-back
[    0.000000]   6 base 0400000000 mask 7FC0000000 write-back
[    0.000000]   7 base 043FE00000 mask 7FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000000] e820: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 77000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x08655000, 0x08655fff] PGTABLE
[    0.000000] BRK [0x08656000, 0x08656fff] PGTABLE
[    0.000000] BRK [0x08657000, 0x08657fff] PGTABLE
[    0.000000] BRK [0x08658000, 0x08658fff] PGTABLE
[    0.000000] BRK [0x08659000, 0x08659fff] PGTABLE
[    0.000000] BRK [0x0865a000, 0x0865afff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x7f70e000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009DFFE014 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x000000009DFFE120 0000A4 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009DFFC000 00010C (v05 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: DSDT 0x000000009DFD2000 024BB9 (v02 HPQOEM 1993     00000001 INTL 20110112)
[    0.000000] ACPI: FACS 0x000000009DE31000 000040
[    0.000000] ACPI: FACS 0x000000009DE31000 000040
[    0.000000] ACPI: HPET 0x000000009DFFB000 000038 (v01 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: APIC 0x000000009DFFA000 0000BC (v01 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 0x000000009DFF9000 00003C (v01 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: ASF! 0x000000009DFF8000 0000A5 (v32 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: TCPA 0x000000009DFF7000 000032 (v02 HPQOEM 1993     00000000 HP   00000001)
[    0.000000] ACPI: SSDT 0x000000009DFCF000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x000000009DFCE000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[    0.000000] ACPI: SLIC 0x000000009DFCD000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.000000] ACPI: MSDM 0x000000009DFCC000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP   00000001)
[    0.000000] ACPI: FPDT 0x000000009DFCB000 000044 (v01 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: BGRT 0x000000009DFCA000 000038 (v00 HPQOEM 1993     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 0x000000009DFC6000 000544 (v01 PmRef  Cpu0Ist  00003000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x000000009DFC5000 000AF3 (v01 PmRef  CpuPm    00003000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x000000009DFC4000 0001D5 (v01 PmRef  LakeTiny 00003000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x000000009DFC3000 000706 (v01 SaSsdt SaSsdt   00003000 INTL 20110112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43fdfa000-0x43fdfdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000097fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000009cb7efff]
[    0.000000]   node   0: [mem 0x000000009dfff000-0x000000009dffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fdfffff]
[    0.000000] On node 0 totalpages: 4049174
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 1072 pages reserved
[    0.000000]   DMA zone: 3990 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9966 pages used for memmap
[    0.000000]   DMA32 zone: 637824 pages, LIFO batch:31
[    0.000000]   Normal zone: 53240 pages used for memmap
[    0.000000]   Normal zone: 3407360 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 100 pages
[    0.000000] Reserving Intel graphics memory at [mem 0x9f200000-0xbf1fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x91b7e000-0x91b7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x91b8e000-0x91b8efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cb7f000-0x9de7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9de7f000-0x9df7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9df7f000-0x9dffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9f1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9f200000-0xbf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff80ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff810000-0xff82efff]
[    0.000000] PM: Registered nosave memory: [mem 0xff82f000-0xffffffff]
[    0.000000] e820: [mem 0xbf200000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x4da with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 3984832
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=LABEL=p_arch rw
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 15749088K/16196696K available (10252K kernel code, 1262K rwdata, 3404K rodata, 1460K init, 640K bss, 447608K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 31738 entries in 124 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000]  RCU priority boosting: priority 1 delay 500 ms.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.000000]  Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180105
[    0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.016666] tsc: Fast TSC calibration using PIT
[    0.019999] tsc: Detected 2494.198 MHz processor
[    0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f3d105f45, max_idle_ns: 440795291013 ns
[    0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.24 BogoMIPS (lpj=8313993)
[    0.019999] pid_max: default: 32768 minimum: 301
[    0.029562] Security Framework initialized
[    0.029564] Yama: becoming mindful.
[    0.031850] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.033020] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.033069] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.033106] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.033304] CPU: Physical Processor ID: 0
[    0.033305] CPU: Processor Core ID: 0
[    0.033310] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.033310] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.033315] mce: CPU supports 7 MCE banks
[    0.033323] CPU0: Thermal monitoring enabled (TM1)
[    0.033338] process: using mwait in idle threads
[    0.033341] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.033341] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.033343] Spectre V2 : Mitigation: Full generic retpoline
[    0.033343] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.033344] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.033433] Freeing SMP alternatives memory: 24K
[    0.040132] TSC deadline timer enabled
[    0.040136] smpboot: CPU0: Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.053340] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.053376] ... version:                3
[    0.053376] ... bit width:              48
[    0.053377] ... generic registers:      4
[    0.053378] ... value mask:             0000ffffffffffff
[    0.053379] ... max period:             00007fffffffffff
[    0.053379] ... fixed-purpose events:   3
[    0.053380] ... event mask:             000000070000000f
[    0.060015] Hierarchical SRCU implementation.
[    0.080237] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.086668] smp: Bringing up secondary CPUs ...
[    0.116691] x86: Booting SMP configuration:
[    0.116693] .... node  #0, CPUs:      #1 #2 #3
[    0.176981] smp: Brought up 1 node, 4 CPUs
[    0.176981] smpboot: Max logical packages: 2
[    0.176981] smpboot: Total of 4 processors activated (19961.98 BogoMIPS)
[    0.180393] devtmpfs: initialized
[    0.180393] x86/mm: Memory block size: 128MB
[    0.181092] PM: Registering ACPI NVS region [mem 0x9de7f000-0x9df7efff] (1048576 bytes)
[    0.181092] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.181092] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.181092] pinctrl core: initialized pinctrl subsystem
[    0.181092] RTC time:  7:40:54, date: 05/18/18
[    0.181092] NET: Registered protocol family 16
[    0.181092] cpuidle: using governor ladder
[    0.186677] cpuidle: using governor menu
[    0.186704] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.186705] ACPI: bus type PCI registered
[    0.186707] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.186770] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.186776] PCI: not using MMCONFIG
[    0.186776] PCI: Using configuration type 1 for base access
[    0.186779] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.187576] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.187576] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.187576] ACPI: Added _OSI(Module Device)
[    0.187576] ACPI: Added _OSI(Processor Device)
[    0.187576] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.187576] ACPI: Added _OSI(Processor Aggregator Device)
[    0.198565] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.206102] ACPI: Dynamic OEM Table Load:
[    0.206109] ACPI: SSDT 0xFFFFA05DADADF800 0003F3 (v01 PmRef  Cpu0Cst  00003001 INTL 20110112)
[    0.206645] ACPI: Dynamic OEM Table Load:
[    0.206651] ACPI: SSDT 0xFFFFA05DAD8A4000 0005DB (v01 PmRef  ApIst    00003000 INTL 20110112)
[    0.207223] ACPI: Dynamic OEM Table Load:
[    0.207227] ACPI: SSDT 0xFFFFA05DADAB5000 000119 (v01 PmRef  ApCst    00003000 INTL 20110112)
[    0.208397] ACPI: EC: EC started
[    0.208398] ACPI: EC: interrupt blocked
[    1.704097] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    1.704099] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.704101] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    1.704101] ACPI: Interpreter enabled
[    1.704128] ACPI: (supports S0 S3 S4 S5)
[    1.704129] ACPI: Using IOAPIC for interrupt routing
[    1.704152] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    1.704617] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    1.704631] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.704936] ACPI: Enabled 7 GPEs in block 00 to 3F
[    1.706996] ACPI: Power Resource [APPR] (off)
[    1.710248] ACPI: Power Resource [COMP] (off)
[    1.710909] ACPI: Power Resource [LPP] (on)
[    1.715308] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.715314] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.717699] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    1.717701] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    1.718390] PCI host bridge to bus 0000:00
[    1.718392] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.718394] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.718395] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.718396] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window]
[    1.718397] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
[    1.718399] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window]
[    1.718400] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[    1.718402] pci_bus 0000:00: root bus resource [bus 00-fe]
[    1.718409] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    1.718545] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    1.718556] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[    1.718562] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.718566] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    1.718582] pci 0000:00:02.0: BAR 2: assigned to efifb
[    1.718714] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    1.718723] pci 0000:00:03.0: reg 0x10: [mem 0xd0730000-0xd0733fff 64bit]
[    1.718870] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    1.718889] pci 0000:00:14.0: reg 0x10: [mem 0xd0720000-0xd072ffff 64bit]
[    1.718945] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.719056] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    1.719078] pci 0000:00:16.0: reg 0x10: [mem 0xd0739000-0xd073900f 64bit]
[    1.719145] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.719258] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[    1.719277] pci 0000:00:19.0: reg 0x10: [mem 0xd0700000-0xd071ffff]
[    1.719285] pci 0000:00:19.0: reg 0x14: [mem 0xd073f000-0xd073ffff]
[    1.719292] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
[    1.719357] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    1.719470] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    1.719491] pci 0000:00:1a.0: reg 0x10: [mem 0xd073e000-0xd073e3ff]
[    1.719576] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.719690] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    1.719708] pci 0000:00:1b.0: reg 0x10: [mem 0xd0734000-0xd0737fff 64bit]
[    1.719772] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.719889] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    1.719967] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.720143] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[    1.720222] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    1.720387] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
[    1.720465] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    1.720627] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    1.720648] pci 0000:00:1d.0: reg 0x10: [mem 0xd073d000-0xd073d3ff]
[    1.720735] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.720851] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[    1.721064] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    1.721081] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
[    1.721088] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
[    1.721095] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
[    1.721103] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
[    1.721110] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    1.721117] pci 0000:00:1f.2: reg 0x24: [mem 0xd073c000-0xd073c7ff]
[    1.721158] pci 0000:00:1f.2: PME# supported from D3hot
[    1.721264] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    1.721280] pci 0000:00:1f.3: reg 0x10: [mem 0xd0738000-0xd07380ff 64bit]
[    1.721294] pci 0000:00:1f.3: reg 0x20: [io  0xef80-0xef9f]
[    1.721456] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.721461] pci 0000:00:1c.0:   bridge window [mem 0xd0600000-0xd06fffff]
[    1.721523] pci 0000:02:00.0: [14e4:4359] type 00 class 0x028000
[    1.721559] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0503fff 64bit]
[    1.721608] pci 0000:02:00.0: enabling Extended Tags
[    1.721700] pci 0000:02:00.0: supports D1 D2
[    1.721702] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.730026] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    1.730031] pci 0000:00:1c.6:   bridge window [mem 0xd0500000-0xd05fffff]
[    1.730132] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
[    1.730186] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd0400fff]
[    1.730543] pci 0000:03:00.0: supports D1 D2
[    1.730544] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    1.740031] pci 0000:00:1c.7: PCI bridge to [bus 03]
[    1.740036] pci 0000:00:1c.7:   bridge window [mem 0xd0400000-0xd04fffff]
[    1.741226] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.741288] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.741349] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.741409] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.741468] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.741529] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.741588] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.741648] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.741993] ACPI: EC: interrupt unblocked
[    1.741993] ACPI: EC: event unblocked
[    1.741993] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.741993] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    1.741996] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.741996] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.741996] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.741996] vgaarb: loaded
[    1.741996] EDAC MC: Ver: 3.0.0
[    1.741996] Registered efivars operations
[    1.872723] PCI: Using ACPI for IRQ routing
[    1.878414] PCI: pci_cache_line_size set to 64 bytes
[    1.878471] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    1.878472] e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]
[    1.878473] e820: reserve RAM buffer [mem 0x91b7e018-0x93ffffff]
[    1.878474] e820: reserve RAM buffer [mem 0x9cb7f000-0x9fffffff]
[    1.878475] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
[    1.878476] e820: reserve RAM buffer [mem 0x43fe00000-0x43fffffff]
[    1.878562] NetLabel: Initializing
[    1.878562] NetLabel:  domain hash size = 128
[    1.878563] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.878579] NetLabel:  unlabeled traffic allowed by default
[    1.878582] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.878582] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.880016] clocksource: Switched to clocksource tsc-early
[    1.889101] VFS: Disk quotas dquot_6.6.0
[    1.889118] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.889189] pnp: PnP ACPI init
[    1.889477] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.889479] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.889480] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.889482] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.889484] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
[    1.889485] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.889487] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.889488] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.889490] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.889491] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved
[    1.889497] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.889733] system 00:01: [io  0x0200-0x027f] has been reserved
[    1.889735] system 00:01: [io  0xffff] has been reserved
[    1.889736] system 00:01: [io  0xffff] has been reserved
[    1.889738] system 00:01: [io  0xffff] has been reserved
[    1.889739] system 00:01: [io  0x1800-0x18fe] has been reserved
[    1.889741] system 00:01: [io  0xef80-0xef9f] has been reserved
[    1.889744] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.889793] system 00:02: [io  0x0800-0x087f] has been reserved
[    1.889797] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.889818] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.890398] pnp 00:04: [dma 0 disabled]
[    1.890476] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[    1.890496] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    1.890515] pnp 00:06: Plug and Play ACPI device, IDs SYN3002 SYN0100 SYN0002 PNP0f13 (active)
[    1.890878] system 00:07: [mem 0x20000000-0x201fffff] could not be reserved
[    1.890880] system 00:07: [mem 0x40004000-0x40004fff] could not be reserved
[    1.890883] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.891144] pnp 00:08: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    1.891163] pnp: PnP ACPI: found 9 devices
[    1.896792] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.896817] pci 0000:00:1c.7: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    1.896819] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    1.896830] pci 0000:00:1c.7: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref]
[    1.896832] pci 0000:00:1c.7: BAR 13: assigned [io  0x2000-0x2fff]
[    1.896835] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.896840] pci 0000:00:1c.0:   bridge window [mem 0xd0600000-0xd06fffff]
[    1.896847] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    1.896852] pci 0000:00:1c.6:   bridge window [mem 0xd0500000-0xd05fffff]
[    1.896858] pci 0000:00:1c.7: PCI bridge to [bus 03]
[    1.896861] pci 0000:00:1c.7:   bridge window [io  0x2000-0x2fff]
[    1.896865] pci 0000:00:1c.7:   bridge window [mem 0xd0400000-0xd04fffff]
[    1.896869] pci 0000:00:1c.7:   bridge window [mem 0xbf300000-0xbf4fffff 64bit pref]
[    1.896875] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.896877] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.896878] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.896879] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window]
[    1.896881] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window]
[    1.896882] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window]
[    1.896883] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window]
[    1.896885] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
[    1.896886] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
[    1.896888] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    1.896889] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
[    1.896890] pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref]
[    1.897008] NET: Registered protocol family 2
[    1.897144] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    1.897193] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.897344] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.897453] TCP: Hash tables configured (established 131072 bind 65536)
[    1.897492] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    1.897533] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    1.897601] NET: Registered protocol family 1
[    1.897613] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.897622] pci 0000:00:14.0: enabling device (0000 -> 0002)
[    1.898443] PCI: CLS 64 bytes, default 64
[    1.898475] Unpacking initramfs...
[    2.007173] Freeing initrd memory: 9156K
[    2.007176] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.007179] software IO TLB [mem 0x953c4000-0x993c4000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    2.007288] Scanning for low memory corruption every 60 seconds
[    2.007768] Initialise system trusted keyrings
[    2.007776] Key type blacklist registered
[    2.007817] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    2.008831] zbud: loaded
[    2.010062] Key type asymmetric registered
[    2.010064] Asymmetric key parser 'x509' registered
[    2.010097] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.010137] io scheduler noop registered
[    2.010138] io scheduler deadline registered
[    2.010176] io scheduler cfq registered (default)
[    2.010177] io scheduler mq-deadline registered
[    2.010178] io scheduler kyber registered
[    2.010184] io scheduler bfq registered
[    2.011016] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    2.011037] pcieport 0000:00:1c.6: Signaling PME with IRQ 25
[    2.011055] pcieport 0000:00:1c.7: Signaling PME with IRQ 26
[    2.011073] pciehp 0000:00:1c.7:pcie004: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    2.011142] efifb: probing for efifb
[    2.011154] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[    2.011155] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    2.011155] efifb: scrolling: redraw
[    2.011157] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.012604] Console: switching to colour frame buffer device 128x48
[    2.013996] fb0: EFI VGA frame buffer device
[    2.014004] intel_idle: MWAIT substates: 0x42120
[    2.014005] intel_idle: v0.4.1 model 0x3C
[    2.014137] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.014199] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    2.014207] ACPI: Sleep Button [SLPB]
[    2.014239] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    2.014243] ACPI: Lid Switch [LID]
[    2.014272] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.014290] ACPI: Power Button [PWRF]
[    2.039496] thermal LNXTHERM:00: registered as thermal_zone0
[    2.039498] ACPI: Thermal Zone [CPUZ] (44 C)
[    2.063990] thermal LNXTHERM:01: registered as thermal_zone1
[    2.063992] ACPI: Thermal Zone [GFXZ] (0 C)
[    2.079232] thermal LNXTHERM:02: registered as thermal_zone2
[    2.079235] ACPI: Thermal Zone [EXTZ] (25 C)
[    2.094516] thermal LNXTHERM:03: registered as thermal_zone3
[    2.094518] ACPI: Thermal Zone [LOCZ] (35 C)
[    2.109850] thermal LNXTHERM:04: registered as thermal_zone4
[    2.109852] ACPI: Thermal Zone [BATZ] (20 C)
[    2.110284] thermal LNXTHERM:05: registered as thermal_zone5
[    2.110285] ACPI: Thermal Zone [PCHZ] (114 C)
[    2.110548] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.111953] intel_pstate: Intel P-state driver initializing
[    2.112162] ledtrig-cpu: registered to indicate activity on CPUs
[    2.112837] NET: Registered protocol family 10
[    2.121112] Segment Routing with IPv6
[    2.121164] NET: Registered protocol family 17
[    2.121748] RAS: Correctable Errors collector initialized.
[    2.121826] microcode: sig=0x306c3, pf=0x10, revision=0x24
[    2.122006] microcode: Microcode Update Driver: v2.2.
[    2.122028] sched_clock: Marking stable (2121991408, 0)->(2123033924, -1042516)
[    2.122558] registered taskstats version 1
[    2.122576] Loading compiled-in X.509 certificates
[    2.122624] zswap: loaded using pool lzo/zbud
[    2.125441] Key type big_key registered
[    2.125796]   Magic number: 2:220:673
[    2.125854] hctosys: unable to open rtc device (rtc0)
[    2.127078] Freeing unused kernel memory: 1460K
[    2.127079] Write protecting the kernel read-only data: 16384k
[    2.127420] Freeing unused kernel memory: 2016K
[    2.128549] Freeing unused kernel memory: 692K
[    2.420396] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.421642] i8042: Detected active multiplexing controller, rev 1.1
[    2.422346] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.422353] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.422355] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.422357] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.422359] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.427537] ACPI: bus type USB registered
[    2.427559] usbcore: registered new interface driver usbfs
[    2.427569] usbcore: registered new interface driver hub
[    2.427597] usbcore: registered new device driver usb
[    2.429631] SCSI subsystem initialized
[    2.430134] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.433657] ehci-pci: EHCI PCI platform driver
[    2.434139] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.434146] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.434159] ehci-pci 0000:00:1a.0: debug port 2
[    2.434660] libata version 3.00 loaded.
[    2.438079] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.438092] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd073e000
[    2.450015] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.450057] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.450059] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.450060] usb usb1: Product: EHCI Host Controller
[    2.450061] usb usb1: Manufacturer: Linux 4.16.8-1-ARCH ehci_hcd
[    2.450062] usb usb1: SerialNumber: 0000:00:1a.0
[    2.450178] hub 1-0:1.0: USB hub found
[    2.450184] hub 1-0:1.0: 2 ports detected
[    2.450632] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.450638] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.450651] ehci-pci 0000:00:1d.0: debug port 2
[    2.454556] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.454568] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000
[    2.466729] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.466780] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.466782] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.466784] usb usb2: Product: EHCI Host Controller
[    2.466785] usb usb2: Manufacturer: Linux 4.16.8-1-ARCH ehci_hcd
[    2.466787] usb usb2: SerialNumber: 0000:00:1d.0
[    2.466934] hub 2-0:1.0: USB hub found
[    2.466941] hub 2-0:1.0: 2 ports detected
[    2.467481] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.467490] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    2.468565] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    2.468572] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.468729] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.468731] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.468733] usb usb3: Product: xHCI Host Controller
[    2.468736] usb usb3: Manufacturer: Linux 4.16.8-1-ARCH xhci-hcd
[    2.468738] usb usb3: SerialNumber: 0000:00:14.0
[    2.468908] hub 3-0:1.0: USB hub found
[    2.468932] hub 3-0:1.0: 14 ports detected
[    2.469963] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.469967] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    2.470037] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.470039] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.470041] usb usb4: Product: xHCI Host Controller
[    2.470043] usb usb4: Manufacturer: Linux 4.16.8-1-ARCH xhci-hcd
[    2.470044] usb usb4: SerialNumber: 0000:00:14.0
[    2.470173] hub 4-0:1.0: USB hub found
[    2.470188] hub 4-0:1.0: 6 ports detected
[    2.470411] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.470707] usb: port power management may be unreliable
[    2.470860] ahci 0000:00:1f.2: version 3.0
[    2.471235] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.471267] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x35 impl SATA mode
[    2.471270] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[    2.501779] scsi host0: ahci
[    2.502149] scsi host1: ahci
[    2.502460] scsi host2: ahci
[    2.502727] scsi host3: ahci
[    2.502960] scsi host4: ahci
[    2.503219] scsi host5: ahci
[    2.503317] ata1: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c100 irq 29
[    2.503320] ata2: DUMMY
[    2.503324] ata3: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c200 irq 29
[    2.503325] ata4: DUMMY
[    2.503329] ata5: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c300 irq 29
[    2.503333] ata6: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c380 irq 29
[    2.780061] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.796686] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.796727] usb 3-5: new full-speed USB device number 2 using xhci_hcd
[    2.817160] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.818315] ata1.00: NCQ Send/Recv Log not supported
[    2.818319] ata1.00: ATA-9: Samsung SSD 840 Series, DXT06B0Q, max UDMA/133
[    2.818323] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.818498] ata1.00: READ LOG DMA EXT failed, trying PIO
[    2.818676] ata1.00: failed to get Identify Device Data, Emask 0x1
[    2.819303] ata1.00: NCQ Send/Recv Log not supported
[    2.819343] ata1.00: failed to get Identify Device Data, Emask 0x1
[    2.819351] ata1.00: configured for UDMA/133
[    2.829876] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  6B0Q PQ: 0 ANSI: 5
[    2.927493] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    2.927500] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.927985] hub 1-1:1.0: USB hub found
[    2.928156] hub 1-1:1.0: 6 ports detected
[    2.938042] usb 3-5: New USB device found, idVendor=138a, idProduct=003f
[    2.938046] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.938049] usb 3-5: SerialNumber: 00b07c01df94
[    2.944148] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    2.944153] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.944500] hub 2-1:1.0: USB hub found
[    2.944654] hub 2-1:1.0: 8 ports detected
[    3.010108] tsc: Refined TSC clocksource calibration: 2494.212 MHz
[    3.010131] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3de46fc1, max_idle_ns: 440795267133 ns
[    3.010183] clocksource: Switched to clocksource tsc
[    3.060111] usb 3-7: new high-speed USB device number 3 using xhci_hcd
[    3.154621] ata3: SATA link down (SStatus 0 SControl 300)
[    3.255455] usb 3-7: New USB device found, idVendor=04ca, idProduct=7034
[    3.255463] usb 3-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.255467] usb 3-7: Product: HP HD Webcam
[    3.255471] usb 3-7: Manufacturer: DDMDH02UI6S7C3
[    3.255475] usb 3-7: SerialNumber: 200901010001
[    3.380119] usb 3-12: new full-speed USB device number 4 using xhci_hcd
[    3.467978] ata5: SATA link down (SStatus 0 SControl 300)
[    3.523278] usb 3-12: New USB device found, idVendor=0a5c, idProduct=21f1
[    3.523285] usb 3-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.523289] usb 3-12: Product: BCM20702A0
[    3.523293] usb 3-12: Manufacturer: Broadcom Corp
[    3.523297] usb 3-12: SerialNumber: 3010B3A53262
[    3.781347] ata6: SATA link down (SStatus 0 SControl 300)
[    3.789115] ata1.00: Enabling discard_zeroes_data
[    3.789432] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    3.789463] sd 0:0:0:0: [sda] Write Protect is off
[    3.789471] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.789516] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.789807] ata1.00: Enabling discard_zeroes_data
[    3.793136]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    3.793729] ata1.00: Enabling discard_zeroes_data
[    3.793815] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.805750] random: fast init done
[    3.891442] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    3.966726] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    3.983495] systemd[1]: Detected architecture x86-64.
[    3.986328] systemd[1]: Set hostname to <quiddi-hp-640>.
[    4.057339] random: systemd: uninitialized urandom read (16 bytes read)
[    4.057353] systemd[1]: Reached target Swap.
[    4.060687] random: systemd: uninitialized urandom read (16 bytes read)
[    4.061990] systemd[1]: Listening on Process Core Dump Socket.
[    4.062067] random: systemd: uninitialized urandom read (16 bytes read)
[    4.062106] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.062211] systemd[1]: Listening on udev Control Socket.
[    4.062296] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.062485] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.062594] systemd[1]: Listening on LVM2 metadata daemon socket.
[    4.080401] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[    4.137391] systemd-journald[227]: Received request to flush runtime journal from PID 1
[    4.246883] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20180105/utaddress-247)
[    4.246890] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.246898] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20180105/utaddress-247)
[    4.246902] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.246904] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20180105/utaddress-247)
[    4.246907] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20180105/utaddress-247)
[    4.246911] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.246912] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20180105/utaddress-247)
[    4.246916] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20180105/utaddress-247)
[    4.246919] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20180105/utaddress-247)
[    4.246923] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000080F (\IO_T) (20180105/utaddress-247)
[    4.246927] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.246928] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.250301] EDAC ie31200: No ECC support
[    4.254179] pps_core: LinuxPPS API ver. 1 registered
[    4.254181] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    4.258200] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.258810] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
[    4.259082] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    4.259113] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    4.280705] input: HP Wireless hotkeys as /devices/virtual/input/input8
[    4.280917] ACPI: AC Adapter [AC] (on-line)
[    4.282286] Linux agpgart interface v0.103
[    4.285060] ACPI: Battery Slot [BAT0] (battery absent)
[    4.304440] PTP clock support registered
[    4.359082] rtc_cmos 00:03: RTC can wake from S4
[    4.359231] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.359264] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    4.362128] hp_accel: hardware type HPB64xx found
[    4.362540] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    4.362541] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    4.362848] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    4.376605] media: Linux media interface: v0.10
[    4.391797] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[    4.418664] Linux video capture interface: v2.00
[    4.453205] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    4.453318] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.460178] parport_pc 00:04: reported by Plug and Play ACPI
[    4.460530] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[    4.472204] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.472691] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.472694] cfg80211: failed to load regulatory.db
[    4.474795] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    4.474840] uvcvideo: Found UVC 1.00 device HP HD Webcam (04ca:7034)
[    4.478838] uvcvideo 3-7:1.0: Entity type for entity Extension 5 was not initialized!
[    4.478841] uvcvideo 3-7:1.0: Entity type for entity Extension 2 was not initialized!
[    4.478843] uvcvideo 3-7:1.0: Entity type for entity Processing 3 was not initialized!
[    4.478845] uvcvideo 3-7:1.0: Entity type for entity Camera 1 was not initialized!
[    4.478918] input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input13
[    4.478991] usbcore: registered new interface driver uvcvideo
[    4.478992] USB Video Class driver (1.1.1)
[    4.481892] Bluetooth: Core ver 2.22
[    4.481906] NET: Registered protocol family 31
[    4.481907] Bluetooth: HCI device and connection manager initialized
[    4.481911] Bluetooth: HCI socket layer initialized
[    4.481913] Bluetooth: L2CAP socket layer initialized
[    4.481920] Bluetooth: SCO socket layer initialized
[    4.491552] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    4.491554] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    4.491555] RAPL PMU: hw unit of domain package 2^-14 Joules
[    4.491556] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    4.491557] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    4.497944] lis3lv02d: 8 bits 3DC sensor found
[    4.508465] cryptd: max_cpu_qlen set to 1000
[    4.530537] usbcore: registered new interface driver btusb
[    4.532227] AVX2 version of gcm_enc/dec engaged.
[    4.532228] AES CTR mode by8 optimization enabled
[    4.579324] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 34:64:a9:d5:5a:54
[    4.579333] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    4.579379] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    4.579424] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[    4.579721] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    4.609220] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[    4.609224] snd_hda_codec_idt hdaudioC1D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[    4.609226] snd_hda_codec_idt hdaudioC1D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    4.609228] snd_hda_codec_idt hdaudioC1D0:    mono: mono_out=0x0
[    4.609229] snd_hda_codec_idt hdaudioC1D0:    inputs:
[    4.609231] snd_hda_codec_idt hdaudioC1D0:      Mic=0xc
[    4.609233] snd_hda_codec_idt hdaudioC1D0:      Internal Mic=0x11
[    4.609235] snd_hda_codec_idt hdaudioC1D0:      Line=0xf
[    4.645465] Bluetooth: hci0: BCM: chip id 63
[    4.646465] Bluetooth: hci0: BCM: features 0x07
[    4.647147] iTCO_vendor_support: vendor-support=0
[    4.648199] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    4.648409] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.648474] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    4.648741] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.648812] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    4.648870] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[    4.648926] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[    4.648982] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[    4.662474] Bluetooth: hci0: BCM20702A
[    4.663466] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[    4.663649] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21f1.hcd failed with error -2
[    4.663652] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21f1.hcd not found
[    4.737194] intel-spi intel-spi: mx25l12805d (16384 Kbytes)
[    4.747849] wl: loading out-of-tree module taints kernel.
[    4.747855] wl: module license 'MIXED/Proprietary' taints kernel.
[    4.747856] Disabling lock debugging due to kernel taint
[    4.751036] Creating 1 MTD partitions on "intel-spi":
[    4.751042] 0x000000000000-0x000001000000 : "BIOS"
[    4.756204] ppdev: user-space parallel port driver
[    4.759846] wl 0000:02:00.0: enabling device (0000 -> 0002)
[    4.760533] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    4.760535] fb: switching to inteldrmfb from EFI VGA
[    4.760569] Console: switching to colour dummy device 80x25
[    4.761042] [drm] Replacing VGA console driver
[    4.774693] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.774694] [drm] Driver supports precise vblank timestamp query.
[    4.782961] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.783790] hp_wmi: query 0xd returned error 0x5
[    4.783845] input: HP WMI hotkeys as /devices/virtual/input/input19
[    4.787552] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    4.823004] wlan0: Broadcom BCM4359 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)

[    4.824368] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[    4.841706] wl 0000:02:00.0 wlo1: renamed from wlan0
[    4.863837] intel_rapl: Found RAPL domain package
[    4.863839] intel_rapl: Found RAPL domain core
[    4.863840] intel_rapl: Found RAPL domain uncore
[    4.863841] intel_rapl: Found RAPL domain dram
[    4.902349] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    5.123688] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    5.127341] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    5.331476] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    5.386159] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826]
[    5.418788] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..]
[    5.418798] psmouse serio3: synaptics: Your touchpad (PNP: SYN3002 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    5.478329] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2758, fw id: 1530444
[    5.517171] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input12
[    5.521547] mousedev: PS/2 mouse device common for all mice
[    5.880271] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input21
[    5.887917] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.888983] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input22
[    5.889410] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.909553] fbcon: inteldrmfb (fb0) is primary device
[    6.627829] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[    6.627837] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[    6.627892] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[    6.991581] Console: switching to colour frame buffer device 200x56
[    7.015441] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.081837] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[    7.082005] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[    7.082063] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25
[    7.082113] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input26
[    7.082168] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input27
[   16.360319] random: crng init done
[   16.360341] random: 7 urandom warning(s) missed due to ratelimiting
[   19.470808] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   50.003835] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   50.005497] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   54.810375] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready

Offline

#5 18.05.2018 13:18:54

gast 007
Gast

Re: [gelöst] b43 WLan Probleme

Ich habe jetzt meine Broadcomkarte (lag zuletzt verwaist neben dem Rechner) eingesetzt und den broadcom-wl aus community installiert.
Das Ergebnis entsprach dmesg zufolge zunächst (augenscheinlich) Deinem Ergebnis, also Treiber geladen aber keine Wlan-Verbindung.
Das Network-Manager-Applet von XFCE zeigte Funknetzwerke an, aber Verbindungen wurden verweigert.

Mittels nm-connection-editor (gui für den Networkmanager) habe ich zu meinem Wlan das Passwort eingegeben und -wichtig in meinem Fall- das Häkchen für "alle Benutzer dürfen diese Verbindung benutzen" gesetzt.
Et voila: Keine Verbindung, weil ich das Wlan erst noch für neue Geräte öffnen musste. Nun läuft's problemfrei!
(Bluetooth ist bei mir im Bios deaktiviert, also ungetestet).

#6 18.05.2018 16:16:06

quiddi
Mitglied

Re: [gelöst] b43 WLan Probleme

Danke, dass du dir extra die Mühe gemacht hast und den W-Lan-Chip bei dir getauscht hast.

(Bluetooth ist bei mir im Bios deaktiviert, also ungetestet).

Damit hätte ich erst mal keine Probleme, Bluetooth wäre mir egal.

Das Teil an sich läuft nun. Meine dmesg sieht immer noch gleich aus wie zuvor. Mein Problem ist immer noch, dass er wegen dem Zeugs in einer Loop beim booten hängen bleibt. Somit braucht das Teil halt eine ganze Weile bis es hochgefahren ist.

Beitrag geändert von quiddi (18.05.2018 16:16:38)

Offline

#7 21.05.2018 13:52:43

Stefan_1957
Mitglied

Re: [gelöst] b43 WLan Probleme

Hallo,
bei mir hat der Funkadapter auch ewig gebraucht. Versuch mal als root: systemctl start NetworkManager-wait-online.service.
Wenn er das ohne Murren annimmt, systemctl enable NetworkManager-wait-online.service. Danach neustarten...

Stefan

Offline

#8 24.05.2018 11:57:37

quiddi
Mitglied

Re: [gelöst] b43 WLan Probleme

Tag zusammen, ich habe es mittlerweile hinbekommen. Das Problem hing mit dem xf86-video-intel Treiber zusammen. Seitdem ich ihn deinstalliert habe geht nun alles. Warum auch immer war er dafür verantwortlich, dass sich beim starten des NetworkManagerApplet dieser in einer Loop gefangen hatte.

Offline

Schnellantwort auf dieses Thema

Schreibe deinen Beitrag und versende ihn
Deine Antwort

Fußzeile des Forums