Hallo erstmal,
ich nutze seit kurzer Zeit Arch 0.7 (vorher Slackware) und habe das Problem das ich meine VisionPlus DVB-S Karte (Twinhan Compatible) nicht zum laufen bekomme. Es wird weder ein Gerät unter /dev/ oder /dev/dvb abgelegt.
Mit den versuch "modprobe dvb_bt8xx" erhalte ich nur
FATAL: Error inserting dvb_bt8xx (/lib/modules/2.6.10-ARCH/kernel/drivers/media/dvb/bt8xx/dvb-bt8xx.ko): Unknown symbol inmodule, or unknown parameter (see dmesg)
lsmod liefer folgendes
Module Size Used by
mt352 6404 0
sp887x 8708 0
dvb_core 86056 0
dst 13960 0
DAC960 75176 0
ide_floppy 19840 0
sr_mod 18852 0
uhci_hcd 34576 0
snd_opl3_lib 11648 0
snd_hwdep 10116 1 snd_opl3_lib
snd_cs4231_lib 28416 0
snd_mpu401_uart 8704 0
snd_rawmidi 26144 1 snd_mpu401_uart
snd_seq_device 8972 2 snd_opl3_lib,snd_rawmidi
pcspkr 4044 0
nvidia 3465820 8
3c59x 40232 0
bt878 11208 1 dst
tuner 22436 0
bttv 156368 1 bt878
video_buf 22404 1 bttv
i2c_algo_bit 10120 1 bttv
v4l2_common 6272 1 bttv
btcx_risc 5256 1 bttv
videodev 10496 1 bttv
hci_usb 15104 0
bluetooth 52740 1 hci_usb
pci_hotplug 34748 0
joydev 10560 0
snd_intel8x0 34336 2
snd_ac97_codec 78176 1 snd_intel8x0
snd_pcm_oss 56612 0
snd_mixer_oss 21120 1 snd_pcm_oss
snd_pcm 101252 5 snd_cs4231_lib,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 27140 3 snd_opl3_lib,snd_cs4231_lib,snd_pcm
snd 59108 15 snd_opl3_lib,snd_hwdep,snd_cs4231_lib,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10848 1 snd
snd_page_alloc 10244 3 snd_cs4231_lib,snd_intel8x0,snd_pcm
forcedeth 18560 0
ehci_hcd 35332 0
usbhid 45824 0
ohci_hcd 23560 0
usbcore 125560 6 uhci_hcd,hci_usb,ehci_hcd,usbhid,ohci_hcd
i2c_nforce2 7040 0
i2c_core 23296 7 mt352,sp887x,dst,tuner,bttv,i2c_algo_bit,i2c_nforce2
tsdev 8128 0
evdev 9984 0
rtc 13128 0
nls_cp437 6144 1
vfat 14976 1
fat 42912 1 vfat
ein dmesg /var/log/messages wirft dann folgendes aus
[...]
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 18 (level, high) -> IRQ 18
bttv0: Bt878 (rev 17) at 0000:01:08.0, irq: 18, latency: 32, mmio: 0xd4000000
bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID is 1822:0001
bttv0: using: Twinhan DST + clones [card=113,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f462ff [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI interrupt 0000:01:08.1[A] -> GSI 18 (level, high) -> IRQ 18
bt878(0): Bt878 (rev 17) at 01:08.1, irq: 18, latency: 32, memory: 0xd4001000
dvb_bt8xx: Unknown symbol nxt6000_attach
Ich wäre dankbar wenn mir jemand bei den problem helfen könnte.