Hallo,
ich muss diesen Thread noch einmal hinaus kramen: Habe mir wegen der Linuxunterstützung eine Tevii S471 zugelegt und finde wie der Thread-Eröffner keine Channels.
Die Karte wird gefunden und wenn ich das richtig sehe auch korrekt geladen:
lspci:
01:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)
dmesg:
[ 3.850788] media: Linux media interface: v0.10
[ 3.852412] Linux video capture interface: v2.00
[ 3.858792] cx23885 driver version 0.0.3 loaded
[ 3.861269] CORE cx23885[0]: subsystem: d471:9022, board: TeVii S471 [card=35,autodetected]
[ 3.988026] cx23885_dvb_register() allocating 1 frontend(s)
[ 3.988029] cx23885[0]: cx23885 based dvb card
[ 3.990469] DS3000 chip version: 0.192 attached.
[ 3.990471] DVB: registering new adapter (cx23885[0])
[ 3.990474] cx23885 0000:01:00.0: DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[ 3.990817] cx23885_dev_checkrevision() Hardware revision = 0xb0
[ 3.990821] cx23885[0]/0: found at 0000:01:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xf7c00000
lsmod | grep cx2:
cx23885 148475 0
btcx_risc 3372 1 cx23885
altera_ci 9077 1 cx23885
videobuf_dvb 4859 1 cx23885
tda18271 35969 1 cx23885
altera_stapl 26837 1 cx23885
tveeprom 13778 1 cx23885
cx2341x 17213 1 cx23885
videobuf_dma_sg 7905 1 cx23885
videobuf_core 16008 3 videobuf_dma_sg,cx23885,videobuf_dvb
dvb_core 99650 3 cx23885,altera_ci,videobuf_dvb
rc_core 16737 1 cx23885
v4l2_common 7431 2 cx2341x,cx23885
videodev 104777 3 cx2341x,cx23885,v4l2_common
snd_pcm 77827 4 cx23885,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd 60157 12 snd_hda_codec_realtek,cx23885,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
i2c_core 23076 11 drm,i915,i2c_i801,cx23885,drm_kms_helper,i2c_algo_bit,ds3000,v4l2_common,tveeprom,tda18271,videodev
Wenn ich jetzt aber mittels "w_scan -fs -sS19E2" oder "kaffeine" nach Sendern suche, findet er nichts:
w_scan -fs -sS19E2 -k > channels.dvb
w_scan version 20121111 (compiled for DVB API 5.9)
using settings for 19.2 east Astra 1F/1G/1H/1KR/1L
scan type SATELLITE, channellist 67
output format kaffeine channels.dvb
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> SATELLITE "Montage Technology DS3000/TS2020": very good :-))
Using SATELLITE frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.9
frontend 'Montage Technology DS3000/TS2020' supports
INVERSION_AUTO
DVB-S
DVB-S2
FREQ (0.95GHz ... 2.15GHz)
SRATE (1.000MSym/s ... 45.000MSym/s)
using LNB "UNIVERSAL"
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
trying 'S2 f = 10729 kHz V SR = 22000 2/3 0,35 8PSK'
(time: 00:00)
trying 'S f = 10744 kHz H SR = 22000 5/6 0,35 QPSK'
(time: 00:02)
...
...
...
trying 'S f = 12729 kHz V SR = 22000 5/6 0,35 QPSK'
(time: 04:34)
ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!
Habt Ihr eine Idee woran es liegen kann? Gleiches Kabel an einen "Smart VX10"-Receiver angeschlossen funktioniert tadellos... Das einzige was ich mir vorstellen kann ist die etwas exotische SelfSat-Antenne (H30D4 ohne klassischen LNB)?!
Die Einstellungen im Receiver lauten:
LNB-Typ: Universal
Satellit: 19,2E Astra 1F,H,KR,L,M
Untere LOF: 9750
Obere LOF: 10600
Bandumschaltung: Auto
DisEqC-Typ: Kein
Ref.Transponder: 95 12603H 22000 S1
Frequenz: 12603
Polarisation: Horizontal
Symbol Rate: 22000
DVB-S2: Nein
Was mir gerade noch aufgefallen ist: Wenn ich auf DVB-S2 im Receiver umstelle, klappen Signalqualität und Signalstärke auf 0% zusammen... Kann es auch damit zusammenhängen? Warum ist das so?
Vielen Dank, PaulchenPlump
PS: Was hat es mit den Rotor-Einstellungen bei Kaffeine auf sich?