Du bist nicht angemeldet.

#1 26.01.2007 19:51:31

Triple666Blood
Mitglied

Neue externe Festplatte 400 GB formatieren ?

Hi,

habe mir eine neue externe Festplatte gekauft. Diese wollte ich nun für Linux einrichten. Da ich mit Amarok unter Linux meine mp3's verwalte und eben nur diese mp'3 s auf der Platte sichern will wollte ich ein Filesystem benutzen bei dem ich gleich von Linux auf die externe Platte schreiben kann. Windoof spielt dabei für mich keine Rolle mehr. Habe jetzt erstmal an ext3 gedacht, da meine root Partition unter Linux auch mit ext3 formatiert wurde. Wenn einer einen besseren Vorschlag hat, wäre ich sehr dankbar. Wenn es geht mit einer kurzen Erkläung warum.

Wie muss ich jetzt in Linux vorgehen um sie zu partitionieren und einzurichten ?
Unter tail -f /var/log/messages.log steht:

Jan 26 18:52:24 Bluehal usb 5-3: new high speed USB device using ehci_hcd and address 4
Jan 26 18:52:24 Bluehal usb 5-3: configuration #1 chosen from 1 choice
Jan 26 18:52:24 Bluehal scsi3 : SCSI emulation for USB Mass Storage devices
Jan 26 18:52:29 Bluehal scsi 3:0:0:0: Direct-Access Hitachi HDT725040VLAT80 PQ: 0 ANSI: 0
Jan 26 18:52:29 Bluehal SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB)
Jan 26 18:52:29 Bluehal sdb: Write Protect is off
Jan 26 18:52:29 Bluehal SCSI device sdb: 781422768 512-byte hdwr sectors (400088 MB)
Jan 26 18:52:29 Bluehal sdb: Write Protect is off
Jan 26 18:52:29 Bluehal sdb:<6>sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:29 Bluehal printk: 72 messages suppressed.
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:29 Bluehal unable to read partition table
Jan 26 18:52:29 Bluehal sd 3:0:0:0: Attached scsi disk sdb
Jan 26 18:52:29 Bluehal sd 3:0:0:0: Attached scsi generic sg2 type 0
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 781422592
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 781422592
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 781422704
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 781422752
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:29 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:29 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 781422592
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 781422592
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 781422704
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 781422752
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 781422760
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0
Jan 26 18:52:30 Bluehal sd 3:0:0:0: SCSI error: return code = 0x10070000
Jan 26 18:52:30 Bluehal end_request: I/O error, dev sdb, sector 0

Warum er diese I/O Fehler ausgibt, weiß ich nicht(Die Festplatte ist natürlich jungfräulich). Unter Windoof hat er sie ohne Probleme formatiert. Ich will nur gerne wissen wie ich es unter Linux anstellen muss.
Möchte gern in naher Zukunft ganz auf windoof verzichten.

MFG

T6B

Offline

#2 27.01.2007 00:58:50

Pierre
Entwickler

Re: Neue externe Festplatte 400 GB formatieren ?

Du hast also schon eine Partition drauf? Dann einfach mit mkfs.<Dateisystem> <Partition> formatieren.

Offline

Schnellantwort auf dieses Thema

Schreibe deinen Beitrag und versende ihn
Deine Antwort

Fußzeile des Forums