Hallo allerseits, ich hab gestern kurzentschlossen Arch64 auf meinen Laptop (Toshiba TecraA8) gepackt. Läuft soweit recht fein, aber ich hab ne kleine Frage:
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Using local APIC timer interrupts.
result 10390620
Detected 10.390 MHz APIC timer.
DSDT? Ich kann mich dunkel erinnern dass da bei der Installation irgendne Abfrage war.
Dieses DSDT hängt doch irgendwie mit ACPI/Battery etc. zusammen oder? Weil ich krieg absolut keine Battery Laufzeit angezeigt, CPU-Scaling mach ich grad mit cpufrequtils das funzt soweit, aber kann das nicht normal der Kernl selber?
[anton@tonix THRM]$ dmesg
Linux version 2.6.22-ARCH (root@T-POWA-LX) (gcc version 4.2.1) #1 SMP PREEMPT Wed Sep 26 21:45:47 CEST 2007
Command line: root=/dev/sda2 resume=/dev/sda1 ro vga=791
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cf790000 (usable)
BIOS-e820: 00000000cf790000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec18000 (reserved)
BIOS-e820: 00000000fec20000 - 00000000fec28000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 849808) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000F0210, 0014 (r0 TOSHIB)
ACPI: RSDT CF790000, 004C (r1 TOSHIB A0046 20060905 TASM 4010000)
ACPI: FACP CF790078, 0084 (r2 TOSHIB A0046 20060921 TASM 4010000)
ACPI: DSDT CF7900FC, 60A1 (r2 TOSHIB A0046 20070223 MSFT 100000E)
ACPI: FACS 000EEE00, 0040
ACPI: SSDT CF79619D, 0306 (r2 TOSHIB A0046 20060907 MSFT 100000E)
ACPI: BOOT CF790050, 0028 (r1 TOSHIB A0046 20060905 TASM 4010000)
ACPI: APIC CF796D55, 0068 (r1 TOSHIB A0046 20060905 TASM 4010000)
ACPI: MCFG CF796DBD, 003C (r1 TOSHIB A0046 20060905 TASM 4010000)
ACPI: HPET CF796E2D, 0038 (r1 TOSHIB A0046 20060905 TASM 4010000)
ACPI: TCPA CF796FDB, 0032 (r2 TOSHIB A0046 20060905 TASM 4010000)
ACPI: SLIC CF796E65, 0176 (r1 TOSHIB A0046 20060905 TASM 4010000)
ACPI: SSDT CF79700D, 0076 (r2 TOSHIB A0046 20051021 MSFT 100000E)
ACPI: SSDT CF797083, 0A59 (r2 TOSHIB A0046 20060925 MSFT 100000E)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 849808) 1 entries of 256 used
No mptable found.
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 849808
On node 0 totalpages: 849711
DMA zone: 56 pages used for memmap
DMA zone: 1113 pages reserved
DMA zone: 2830 pages, LIFO batch:0
DMA32 zone: 11562 pages used for memmap
DMA32 zone: 834150 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0xd808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000ee000
swsusp: Registered nosave memory region: 00000000000ee000 - 00000000000ef000
swsusp: Registered nosave memory region: 00000000000ef000 - 0000000000100000
Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 33800 bytes of per cpu data
Built 1 zonelists. Total pages: 836980
Kernel command line: root=/dev/sda2 resume=/dev/sda1 ro vga=791
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 1828.749 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3339532k/3399232k available (2694k kernel code, 58868k reserved, 1008k data, 248k init)
Calibrating delay using timer specific routine.. 3663.36 BogoMIPS (lpj=6102982)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring handled by SMI
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Using local APIC timer interrupts.
result 10390620
Detected 10.390 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3659.61 BogoMIPS (lpj=6096979)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=60
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region d800-d87f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region eec0-eeff claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MPEX._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
ACPI: Power Resource [PDOC] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
ACPI: RTC can wake from S4
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:00: iomem range 0x100000-0xcf78ffff could not be reserved
pnp: 00:00: iomem range 0xcf790000-0xcf79ffff could not be reserved
pnp: 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
pnp: 00:09: ioport range 0x1e0-0x1ef has been reserved
PCI: Bridge: 0000:00:1c.0
IO window: b000-bfff
MEM window: ffc00000-ffcfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: ffa00000-ffafffff
PREFETCH window: disabled.
PCI: Bus 4, cardbus bridge: 0000:03:0b.0
IO window: 00001000-000010ff
IO window: 00001400-000014ff
PREFETCH window: d4000000-d7ffffff
MEM window: d8000000-dbffffff
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: d8000000-ddffffff
PREFETCH window: d4000000-d7ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:03:0b.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 21 (level, low) -> IRQ 21
NET: Registered protocol family 2
Time: tsc clocksource has been installed.
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1555k freed
Simple Boot Flag value 0xb read from CMOS RAM was invalid
Simple Boot Flag at 0x7c set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20000080000, using 3072k, total 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 248k freed
libata version 2.21 loaded.
ata_piix 0000:00:1f.2: version 2.11
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001af10 irq 14
ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001af18 irq 15
ata1.00: ATA-7: FUJITSU MHV2160BT PL, 0000004F, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.40, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2160B 0000 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.40 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
Attempting manual resume
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: Using r5 hash to sort names
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18-p1
toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
ACPI: SSDT CF7967E5, 00F3 (r2 TOSHIB A0046 20060907 MSFT 100000E)
ACPI: SSDT CF79694E, 034E (r2 TOSHIB A0046 20060907 MSFT 100000E)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: SSDT CF7968D8, 0076 (r2 TOSHIB A0046 20060907 MSFT 100000E)
ACPI: SSDT CF796C9C, 0079 (r2 TOSHIB A0046 20060907 MSFT 100000E)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Marking TSC unstable due to possible TSC halt in C2
Time: hpet clocksource has been installed.
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
e1000: 0000:01:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:15:b7:0c:81:51
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.0ds
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:02:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
wmaster0: Selected rate control algorithm 'iwl-3945-rs'
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
ACPI: Thermal Zone [THRM] (57 C)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000afe0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000af80
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000af60
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000af40
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffd3fc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
input: PS/2 Mouse as /class/input/input5
intel_rng: FWH not detected
input: AlpsPS/2 ALPS GlidePoint as /class/input/input6
pnp: Device 00:0c activated.
parport_pc 00:0c: reported by Plug and Play ACPI
pnp: Device 00:0c disabled.
usb 5-6: new high speed USB device using ehci_hcd and address 2
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:08 failed with error -16
usb 5-6: configuration #1 chosen from 1 choice
hub 5-6:1.0: USB hub found
hub 5-6:1.0: 4 ports detected
PPP generic driver version 2.4.2
usb 5-6.1: new high speed USB device using ehci_hcd and address 3
PCI: Enabling device 0000:03:0b.1 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:0b.1[b] -> GSI 20 (level, low) -> IRQ 20
usb 5-6.1: configuration #1 chosen from 1 choice
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[dc005000-dc0057ff] Max Packet=[2048] IR/IT contexts=[4/8]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:03:0b.3 [104c:803c] (rev 0)
PCI: Enabling device 0000:03:0b.3 (0000 -> 0002)
ACPI: PCI Interrupt 0000:03:0b.3[D] -> GSI 23 (level, low) -> IRQ 23
mmc0: SDHCI at 0xdc005800 irq 23 DMA
usb 5-6.3: new full speed USB device using ehci_hcd and address 4
input: PC Speaker as /class/input/input7
lp: driver loaded but no devices found
usb 5-6.3: configuration #1 chosen from 1 choice
Yenta: CardBus bridge found at 0000:03:0b.0 [1179:0001]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:03:0b.0, mfunc 0x01aa1022, devctl 0x64
Yenta: ISA IRQ mask 0x0cf8, PCI irq 21
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xddffffff
pcmcia: parent PCI bridge Memory window: 0xd4000000 - 0xd7ffffff
ppdev: user-space parallel port driver
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
input: Logitech USB Gaming Mouse as /class/input/input8
input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.7-6.3
hiddev0: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.7-6.3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...
ieee1394: Host added: ID:BUS[0-01:1023] GUID[0000390000aa34e8]
scsi 2:0:0:0: Direct-Access HDT72252 5DLAT80 0000 PQ: 0 ANSI: 0
sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 27 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 27 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
Adding 995988k swap on /dev/sda1. Priority:-1 extents:1 across:995988k
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
fuse init (API version 7.8)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
eth0: no IPv6 routers present
[anton@tonix THRM]$