Du bist nicht angemeldet.

#1 24.06.2020 22:30:22

LotosKaiser04
Mitglied

Nvidia GTX 1050 ti unter funktioniert unter KDE nicht richtig.

Hallo, ich hab wochenlang alles versucht aber bekomm es einfach nicht hin das NVIDIA richtig auf KDE läuft es macht bei jeder Distro Probleme.  Andere die ich kenne haben auch eine Nvidia drin und bei denen geht es super.  Ich hab auch keine Lust mir eine neu Grafikkarte von AMD zu holen.
Also hat Vieleicht jemand Ideen?  So langsam bin ich nähmlich am verzweifeln.

Offline

#2 24.06.2020 22:54:06

eiPai7de
Gast

Re: Nvidia GTX 1050 ti unter funktioniert unter KDE nicht richtig.

Das hatte ich dir ja schon beim letzten Mal geschrieben, was du machen sollst, nämlich das Wiki lesen und die Anleitungen zur Problembehandlung befolgen. Und vor allem auch mal detailliert beschreiben, was wie installiert wurde, aber da kommt ja nichts von dir. Statt dessen eröffnest du alle paar Tage wieder eine neue Diskussion zum gleichen Thema. Außerdem läuft es ja nicht nur bei KDE nicht, sondern mit XFCE auch schon nicht.

Und sonst frag halt die anderen, die du kennst und bei denen es super geht, was sie anders machen als du.

#3 24.06.2020 22:58:48

LotosKaiser04
Mitglied

Re: Nvidia GTX 1050 ti unter funktioniert unter KDE nicht richtig.

Ich habe alles so gemacht wie in der Anleitung. Die Programme die ich installiert hab sind nvidia und lib32-Nvidia.
Xfce hab ich dammit gelöst bekommen aber KDE macht halt immer dammit Probleme.
Die anderen installieren es einfach und es funktioniert. Die haben aber eine andere Grafikkarte von Nvidia.

Offline

#4 25.06.2020 11:09:26

LotosKaiser04
Mitglied

Re: Nvidia GTX 1050 ti unter funktioniert unter KDE nicht richtig.

Das Ist ja das Problem ich weiß nicht wo die Probleme liegen. Jeder Desktop funkoniert nur nicht KDE. Bei KDE kommen nur Pixelfehler und es ruckelt dermassen. Außerdem sind da die Animationen ganz langsam. Wen jemand Vieleicht eine Idee hätte wo die Probleme sind könnte ich auch die Informationen dazu schicken aber ich weiß nicht wo der Fehler ist.

Meine Treiber: Nvidia lib32-Nvidia

Offline

#5 25.06.2020 16:59:25

Nick_0278
Mitglied

Re: Nvidia GTX 1050 ti unter funktioniert unter KDE nicht richtig.

Genau, für ein 32Bit System müsste er da mal vorbeischauen https://archlinux32.org/

Offline

#6 25.06.2020 19:42:04

LotosKaiser04
Mitglied

Re: Nvidia GTX 1050 ti unter funktioniert unter KDE nicht richtig.

Ich habe nun mal in  der Xorg.0.log Datei geguckt und wie ich das verstehe wird das alle richtig geladen. Heute ist mir aber aufgefallen das es nur Probleme beim start gibt. Also Pixelfehler und langsame Animationen. Wen ich KDE dann benutze funktoniert es super sprich keine Fehler oder AnimationsFehler. Das einzige was mir aufgefallen ist das die Animation bei starten von Apps manchmal Ruckeln was man aber ausstellen kann. Vieleicht liegt es ja wirklich irgendwie an Xorg das es am Anfang Probleme hat und es dadurch durscheinander kommt.

Hier meine Xorg.0.log Datei:

[   183.409] (--) Log file renamed from "/var/log/Xorg.pid-1716.log" to "/var/log/Xorg.0.log"
[   183.410] 
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[   183.410] Build Operating System: Linux Arch Linux
[   183.410] Current Operating System: Linux PC-Alex 5.7.5-arch1-1 #1 SMP PREEMPT Mon, 22 Jun 2020 08:10:02 +0000 x86_64
[   183.410] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b1517a8d-b4a7-446d-a800-3e8edf8809b7 rw loglevel=3 quiet
[   183.410] Build Date: 05 May 2020  05:08:17AM
[   183.410]  
[   183.410] Current version of pixman: 0.40.0
[   183.410] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   183.410] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   183.410] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 25 17:28:51 2020
[   183.410] (==) Using config file: "/etc/X11/xorg.conf"
[   183.410] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   183.411] (==) ServerLayout "Layout0"
[   183.411] (**) |-->Screen "Screen0" (0)
[   183.411] (**) |   |-->Monitor "Monitor0"
[   183.411] (**) |   |-->Device "Device0"
[   183.411] (**) |-->Input Device "Keyboard0"
[   183.411] (**) |-->Input Device "Mouse0"
[   183.411] (**) Option "Xinerama" "0"
[   183.411] (==) Automatically adding devices
[   183.411] (==) Automatically enabling devices
[   183.411] (==) Automatically adding GPU devices
[   183.411] (==) Automatically binding GPU devices
[   183.411] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   183.411] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[   183.411] 	Entry deleted from font path.
[   183.411] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[   183.411] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   183.411] 	Entry deleted from font path.
[   183.411] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   183.411] 	Entry deleted from font path.
[   183.411] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[   183.411] (==) ModulePath set to "/usr/lib/xorg/modules"
[   183.411] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   183.411] (WW) Disabling Keyboard0
[   183.411] (WW) Disabling Mouse0
[   183.411] (II) Module ABI versions:
[   183.411] 	X.Org ANSI C Emulation: 0.4
[   183.411] 	X.Org Video Driver: 24.1
[   183.411] 	X.Org XInput driver : 24.1
[   183.411] 	X.Org Server Extension : 10.0
[   183.412] (++) using VT number 1

[   183.412] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   183.412] (II) xfree86: Adding drm device (/dev/dri/card1)
[   183.412] (II) xfree86: Adding drm device (/dev/dri/card0)
[   183.413] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[   183.415] (--) PCI: (0@0:2:0) 8086:0102:1043:844d rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[   183.415] (--) PCI:*(1@0:0:0) 10de:1c82:1458:3763 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[   183.415] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   183.415] (II) LoadModule: "glx"
[   183.415] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   183.416] (II) Module glx: vendor="X.Org Foundation"
[   183.416] 	compiled for 1.20.8, module version = 1.0.0
[   183.416] 	ABI class: X.Org Server Extension, version 10.0
[   183.416] (II) LoadModule: "nvidia"
[   183.416] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   183.416] (II) Module nvidia: vendor="NVIDIA Corporation"
[   183.416] 	compiled for 1.6.99.901, module version = 1.0.0
[   183.416] 	Module class: X.Org Video Driver
[   183.416] (II) NVIDIA dlloader X Driver  440.82  Wed Apr  1 19:50:17 UTC 2020
[   183.416] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   183.416] (II) Loading sub module "fb"
[   183.416] (II) LoadModule: "fb"
[   183.417] (II) Loading /usr/lib/xorg/modules/libfb.so
[   183.417] (II) Module fb: vendor="X.Org Foundation"
[   183.417] 	compiled for 1.20.8, module version = 1.0.0
[   183.417] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   183.417] (II) Loading sub module "wfb"
[   183.417] (II) LoadModule: "wfb"
[   183.417] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   183.417] (II) Module wfb: vendor="X.Org Foundation"
[   183.417] 	compiled for 1.20.8, module version = 1.0.0
[   183.417] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   183.417] (II) Loading sub module "ramdac"
[   183.417] (II) LoadModule: "ramdac"
[   183.417] (II) Module "ramdac" already built-in
[   183.417] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[   183.417] (==) NVIDIA(0): RGB weight 888
[   183.417] (==) NVIDIA(0): Default visual is TrueColor
[   183.417] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   183.417] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[   183.417] (**) NVIDIA(0): Option "Stereo" "0"
[   183.417] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[   183.417] (**) NVIDIA(0): Option "SLI" "Off"
[   183.417] (**) NVIDIA(0): Option "MultiGPU" "Off"
[   183.417] (**) NVIDIA(0): Option "BaseMosaic" "off"
[   183.417] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[   183.417] (**) NVIDIA(0): Stereo disabled by request
[   183.417] (**) NVIDIA(0): NVIDIA SLI disabled.
[   183.417] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[   183.417] (**) NVIDIA(0): Option "MetaModes" "DVI-D-0: nvidia-auto-select +0+90, HDMI-0: nvidia-auto-select +1440+0"
[   183.417] (**) NVIDIA(0): Enabling 2D acceleration
[   183.417] (II) Loading sub module "glxserver_nvidia"
[   183.417] (II) LoadModule: "glxserver_nvidia"
[   183.417] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[   183.423] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[   183.423] 	compiled for 1.6.99.901, module version = 1.0.0
[   183.423] 	Module class: X.Org Server Extension
[   183.423] (II) NVIDIA GLX Module  440.82  Wed Apr  1 19:47:36 UTC 2020
[   183.423] (II) NVIDIA: The X server supports PRIME Render Offload.
[   183.433] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[   183.433] (--) NVIDIA(0):     DFP-0 (boot)
[   183.433] (--) NVIDIA(0):     DFP-1 (boot)
[   183.433] (--) NVIDIA(0):     DFP-2
[   183.433] (--) NVIDIA(0):     DFP-3
[   183.433] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 Ti (GP107-A) at PCI:1:0:0 (GPU-0)
[   183.433] (--) NVIDIA(0): Memory: 4194304 kBytes
[   183.433] (--) NVIDIA(0): VideoBIOS: 86.07.42.00.99
[   183.433] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   183.448] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[   183.448] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[   183.448] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[   183.448] (--) NVIDIA(GPU-0): 
[   183.477] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): connected
[   183.477] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): Internal TMDS
[   183.477] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[   183.477] (--) NVIDIA(GPU-0): 
[   183.477] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   183.477] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   183.477] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[   183.477] (--) NVIDIA(GPU-0): 
[   183.478] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   183.478] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   183.478] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   183.478] (--) NVIDIA(GPU-0): 
[   183.486] (II) NVIDIA(0): Validated MetaModes:
[   183.486] (II) NVIDIA(0):    
[   183.486] (II) NVIDIA(0):     "DVI-D-0:nvidia-auto-select+0+90,HDMI-0:nvidia-auto-select+1440+0"
[   183.486] (II) NVIDIA(0): Virtual screen size determined to be 3360 x 1080
[   183.490] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[   183.490] (--) NVIDIA(0):     option
[   183.490] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[   183.490] (II) NVIDIA:     access.
[   183.493] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   183.493] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   183.493] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   183.493] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   183.493] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   183.493] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   183.493] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   183.493] (II) NVIDIA(0):     Config Options in the README.
[   183.516] (II) NVIDIA(0): Setting mode "DVI-D-0:nvidia-auto-select+0+90,HDMI-0:nvidia-auto-select+1440+0"
[   183.584] (==) NVIDIA(0): Disabling shared memory pixmaps
[   183.584] (==) NVIDIA(0): Backing store enabled
[   183.584] (==) NVIDIA(0): Silken mouse disabled
[   183.584] (**) NVIDIA(0): DPMS enabled
[   183.584] (II) Loading sub module "dri2"
[   183.584] (II) LoadModule: "dri2"
[   183.584] (II) Module "dri2" already built-in
[   183.584] (II) NVIDIA(0): [DRI2] Setup complete
[   183.584] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   183.584] (II) Initializing extension Generic Event Extension
[   183.585] (II) Initializing extension SHAPE
[   183.585] (II) Initializing extension MIT-SHM
[   183.585] (II) Initializing extension XInputExtension
[   183.585] (II) Initializing extension XTEST
[   183.585] (II) Initializing extension BIG-REQUESTS
[   183.585] (II) Initializing extension SYNC
[   183.585] (II) Initializing extension XKEYBOARD
[   183.585] (II) Initializing extension XC-MISC
[   183.585] (II) Initializing extension SECURITY
[   183.585] (II) Initializing extension XFIXES
[   183.585] (II) Initializing extension RENDER
[   183.586] (II) Initializing extension RANDR
[   183.586] (II) Initializing extension COMPOSITE
[   183.586] (II) Initializing extension DAMAGE
[   183.586] (II) Initializing extension MIT-SCREEN-SAVER
[   183.586] (II) Initializing extension DOUBLE-BUFFER
[   183.586] (II) Initializing extension RECORD
[   183.586] (II) Initializing extension DPMS
[   183.586] (II) Initializing extension Present
[   183.586] (II) Initializing extension DRI3
[   183.586] (II) Initializing extension X-Resource
[   183.586] (II) Initializing extension XVideo
[   183.586] (II) Initializing extension XVideo-MotionCompensation
[   183.586] (II) Initializing extension GLX
[   183.587] (II) Initializing extension GLX
[   183.587] (II) Indirect GLX disabled.
[   183.587] (II) GLX: Another vendor is already registered for screen 0
[   183.587] (II) Initializing extension XFree86-VidModeExtension
[   183.587] (II) Initializing extension XFree86-DGA
[   183.587] (II) Initializing extension XFree86-DRI
[   183.587] (II) Initializing extension DRI2
[   183.587] (II) Initializing extension NV-GLX
[   183.587] (II) Initializing extension NV-CONTROL
[   183.587] (II) Initializing extension XINERAMA
[   183.652] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   183.652] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   183.652] (II) LoadModule: "libinput"
[   183.652] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   183.653] (II) Module libinput: vendor="X.Org Foundation"
[   183.653] 	compiled for 1.20.8, module version = 0.30.0
[   183.653] 	Module class: X.Org XInput Driver
[   183.653] 	ABI class: X.Org XInput driver, version 24.1
[   183.653] (II) Using input driver 'libinput' for 'Power Button'
[   183.653] (**) Power Button: always reports core events
[   183.653] (**) Option "Device" "/dev/input/event1"
[   183.653] (**) Option "_source" "server/udev"
[   183.654] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   183.655] (II) event1  - Power Button: device is a keyboard
[   183.655] (II) event1  - Power Button: device removed
[   183.683] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[   183.683] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   183.684] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   183.684] (II) event1  - Power Button: device is a keyboard
[   183.684] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[   183.685] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   183.685] (II) Using input driver 'libinput' for 'Video Bus'
[   183.685] (**) Video Bus: always reports core events
[   183.685] (**) Option "Device" "/dev/input/event2"
[   183.685] (**) Option "_source" "server/udev"
[   183.685] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[   183.685] (II) event2  - Video Bus: device is a keyboard
[   183.686] (II) event2  - Video Bus: device removed
[   183.735] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[   183.735] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   183.737] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[   183.737] (II) event2  - Video Bus: device is a keyboard
[   183.738] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   183.738] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   183.738] (II) Using input driver 'libinput' for 'Power Button'
[   183.738] (**) Power Button: always reports core events
[   183.738] (**) Option "Device" "/dev/input/event0"
[   183.738] (**) Option "_source" "server/udev"
[   183.740] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   183.740] (II) event0  - Power Button: device is a keyboard
[   183.740] (II) event0  - Power Button: device removed
[   183.764] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[   183.764] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   183.766] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   183.766] (II) event0  - Power Button: device is a keyboard
[   183.768] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10)
[   183.768] (II) No input driver specified, ignoring this device.
[   183.768] (II) This device may have been added with another device file.
[   183.768] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event11)
[   183.768] (II) No input driver specified, ignoring this device.
[   183.768] (II) This device may have been added with another device file.
[   183.769] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[   183.769] (II) No input driver specified, ignoring this device.
[   183.769] (II) This device may have been added with another device file.
[   183.769] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[   183.769] (II) No input driver specified, ignoring this device.
[   183.769] (II) This device may have been added with another device file.
[   183.770] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event14)
[   183.770] (II) No input driver specified, ignoring this device.
[   183.770] (II) This device may have been added with another device file.
[   183.771] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event15)
[   183.771] (II) No input driver specified, ignoring this device.
[   183.771] (II) This device may have been added with another device file.
[   183.772] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event17)
[   183.772] (II) No input driver specified, ignoring this device.
[   183.772] (II) This device may have been added with another device file.
[   183.772] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event18)
[   183.772] (II) No input driver specified, ignoring this device.
[   183.772] (II) This device may have been added with another device file.
[   183.773] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event19)
[   183.773] (II) No input driver specified, ignoring this device.
[   183.773] (II) This device may have been added with another device file.
[   183.773] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event20)
[   183.773] (II) No input driver specified, ignoring this device.
[   183.773] (II) This device may have been added with another device file.
[   183.774] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event21)
[   183.774] (II) No input driver specified, ignoring this device.
[   183.774] (II) This device may have been added with another device file.
[   183.775] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event22)
[   183.775] (II) No input driver specified, ignoring this device.
[   183.775] (II) This device may have been added with another device file.
[   183.775] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event3)
[   183.775] (**) Logitech Gaming Mouse G502: Applying InputClass "libinput pointer catchall"
[   183.775] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502'
[   183.775] (**) Logitech Gaming Mouse G502: always reports core events
[   183.775] (**) Option "Device" "/dev/input/event3"
[   183.775] (**) Option "_source" "server/udev"
[   183.833] (II) event3  - Logitech Gaming Mouse G502: is tagged by udev as: Mouse
[   183.834] (II) event3  - Logitech Gaming Mouse G502: device is a pointer
[   183.834] (II) event3  - Logitech Gaming Mouse G502: device removed
[   183.884] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:046D:C07D.0001/input/input3/event3"
[   183.884] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: MOUSE, id 9)
[   183.885] (**) Option "AccelerationScheme" "none"
[   183.885] (**) Logitech Gaming Mouse G502: (accel) selected scheme none/0
[   183.885] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000
[   183.885] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4
[   183.943] (II) event3  - Logitech Gaming Mouse G502: is tagged by udev as: Mouse
[   183.944] (II) event3  - Logitech Gaming Mouse G502: device is a pointer
[   183.945] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/mouse0)
[   183.945] (II) No input driver specified, ignoring this device.
[   183.945] (II) This device may have been added with another device file.
[   183.946] (II) config/udev: Adding input device Logitech Gaming Mouse G502 Keyboard (/dev/input/event4)
[   183.946] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall"
[   183.946] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Keyboard'
[   183.946] (**) Logitech Gaming Mouse G502 Keyboard: always reports core events
[   183.946] (**) Option "Device" "/dev/input/event4"
[   183.946] (**) Option "_source" "server/udev"
[   183.949] (II) event4  - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard
[   183.949] (II) event4  - Logitech Gaming Mouse G502 Keyboard: device is a keyboard
[   183.949] (II) event4  - Logitech Gaming Mouse G502 Keyboard: device removed
[   183.974] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/0003:046D:C07D.0002/input/input4/event4"
[   183.975] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Keyboard" (type: KEYBOARD, id 10)
[   183.977] (II) event4  - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard
[   183.977] (II) event4  - Logitech Gaming Mouse G502 Keyboard: device is a keyboard
[   183.979] (II) config/udev: Adding input device Logitech Gaming Mouse G502 Consumer Control (/dev/input/event5)
[   183.979] (**) Logitech Gaming Mouse G502 Consumer Control: Applying InputClass "libinput keyboard catchall"
[   183.979] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Consumer Control'
[   183.979] (**) Logitech Gaming Mouse G502 Consumer Control: always reports core events
[   183.979] (**) Option "Device" "/dev/input/event5"
[   183.979] (**) Option "_source" "server/udev"
[   183.982] (II) event5  - Logitech Gaming Mouse G502 Consumer Control: is tagged by udev as: Keyboard
[   183.982] (II) event5  - Logitech Gaming Mouse G502 Consumer Control: device is a keyboard
[   183.982] (II) event5  - Logitech Gaming Mouse G502 Consumer Control: device removed
[   184.014] (II) libinput: Logitech Gaming Mouse G502 Consumer Control: needs a virtual subdevice
[   184.014] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/0003:046D:C07D.0002/input/input5/event5"
[   184.014] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Consumer Control" (type: MOUSE, id 11)
[   184.015] (**) Option "AccelerationScheme" "none"
[   184.015] (**) Logitech Gaming Mouse G502 Consumer Control: (accel) selected scheme none/0
[   184.015] (**) Logitech Gaming Mouse G502 Consumer Control: (accel) acceleration factor: 2.000
[   184.015] (**) Logitech Gaming Mouse G502 Consumer Control: (accel) acceleration threshold: 4
[   184.017] (II) event5  - Logitech Gaming Mouse G502 Consumer Control: is tagged by udev as: Keyboard
[   184.017] (II) event5  - Logitech Gaming Mouse G502 Consumer Control: device is a keyboard
[   184.019] (II) config/udev: Adding input device Logitech Gaming Mouse G502 System Control (/dev/input/event6)
[   184.019] (**) Logitech Gaming Mouse G502 System Control: Applying InputClass "libinput keyboard catchall"
[   184.019] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 System Control'
[   184.019] (**) Logitech Gaming Mouse G502 System Control: always reports core events
[   184.019] (**) Option "Device" "/dev/input/event6"
[   184.019] (**) Option "_source" "server/udev"
[   184.021] (II) event6  - Logitech Gaming Mouse G502 System Control: is tagged by udev as: Keyboard
[   184.022] (II) event6  - Logitech Gaming Mouse G502 System Control: device is a keyboard
[   184.022] (II) event6  - Logitech Gaming Mouse G502 System Control: device removed
[   184.041] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/0003:046D:C07D.0002/input/input6/event6"
[   184.041] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 System Control" (type: KEYBOARD, id 12)
[   184.044] (II) event6  - Logitech Gaming Mouse G502 System Control: is tagged by udev as: Keyboard
[   184.044] (II) event6  - Logitech Gaming Mouse G502 System Control: device is a keyboard
[   184.046] (II) config/udev: Adding input device Logitech Gaming Keyboard G105 (/dev/input/event7)
[   184.046] (**) Logitech Gaming Keyboard G105: Applying InputClass "libinput keyboard catchall"
[   184.046] (II) Using input driver 'libinput' for 'Logitech Gaming Keyboard G105'
[   184.046] (**) Logitech Gaming Keyboard G105: always reports core events
[   184.046] (**) Option "Device" "/dev/input/event7"
[   184.046] (**) Option "_source" "server/udev"
[   184.048] (II) event7  - Logitech Gaming Keyboard G105: is tagged by udev as: Keyboard
[   184.048] (II) event7  - Logitech Gaming Keyboard G105: device is a keyboard
[   184.049] (II) event7  - Logitech Gaming Keyboard G105: device removed
[   184.068] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/0003:046D:C248.0003/input/input9/event7"
[   184.068] (II) XINPUT: Adding extended input device "Logitech Gaming Keyboard G105" (type: KEYBOARD, id 13)
[   184.070] (II) event7  - Logitech Gaming Keyboard G105: is tagged by udev as: Keyboard
[   184.071] (II) event7  - Logitech Gaming Keyboard G105: device is a keyboard
[   184.072] (II) config/udev: Adding input device Logitech Gaming Keyboard G105 Consumer Control (/dev/input/event8)
[   184.072] (**) Logitech Gaming Keyboard G105 Consumer Control: Applying InputClass "libinput keyboard catchall"
[   184.072] (II) Using input driver 'libinput' for 'Logitech Gaming Keyboard G105 Consumer Control'
[   184.072] (**) Logitech Gaming Keyboard G105 Consumer Control: always reports core events
[   184.072] (**) Option "Device" "/dev/input/event8"
[   184.072] (**) Option "_source" "server/udev"
[   184.074] (II) event8  - Logitech Gaming Keyboard G105 Consumer Control: is tagged by udev as: Keyboard
[   184.075] (II) event8  - Logitech Gaming Keyboard G105 Consumer Control: device is a keyboard
[   184.075] (II) event8  - Logitech Gaming Keyboard G105 Consumer Control: device removed
[   184.134] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.1/0003:046D:C248.0004/input/input10/event8"
[   184.134] (II) XINPUT: Adding extended input device "Logitech Gaming Keyboard G105 Consumer Control" (type: KEYBOARD, id 14)
[   184.137] (II) event8  - Logitech Gaming Keyboard G105 Consumer Control: is tagged by udev as: Keyboard
[   184.137] (II) event8  - Logitech Gaming Keyboard G105 Consumer Control: device is a keyboard
[   184.138] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event16)
[   184.138] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   184.138] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[   184.138] (**) Eee PC WMI hotkeys: always reports core events
[   184.138] (**) Option "Device" "/dev/input/event16"
[   184.138] (**) Option "_source" "server/udev"
[   184.140] (II) event16 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[   184.140] (II) event16 - Eee PC WMI hotkeys: device is a keyboard
[   184.140] (II) event16 - Eee PC WMI hotkeys: device removed
[   184.214] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input19/event16"
[   184.214] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 15)
[   184.216] (II) event16 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[   184.216] (II) event16 - Eee PC WMI hotkeys: device is a keyboard
[   184.217] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[   184.217] (II) No input driver specified, ignoring this device.
[   184.217] (II) This device may have been added with another device file.
[   184.225] (**) Logitech Gaming Mouse G502 Consumer Control: Applying InputClass "libinput keyboard catchall"
[   184.225] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Consumer Control'
[   184.225] (**) Logitech Gaming Mouse G502 Consumer Control: always reports core events
[   184.225] (**) Option "Device" "/dev/input/event5"
[   184.225] (**) Option "_source" "_driver/libinput"
[   184.225] (II) libinput: Logitech Gaming Mouse G502 Consumer Control: is a virtual subdevice
[   184.225] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/0003:046D:C07D.0002/input/input5/event5"
[   184.225] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Consumer Control" (type: KEYBOARD, id 16)
[   184.227] (EE) Failed to open authorization file "/var/run/sddm/{a43c679f-fb5c-47c0-b32b-0903a19730ea}": No such file or directory
[   187.465] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[   187.465] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[   187.466] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[   187.466] (--) NVIDIA(GPU-0): 
[   187.495] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): connected
[   187.495] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): Internal TMDS
[   187.495] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[   187.495] (--) NVIDIA(GPU-0): 
[   187.495] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   187.495] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   187.495] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[   187.495] (--) NVIDIA(GPU-0): 
[   187.496] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   187.496] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   187.496] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   187.496] (--) NVIDIA(GPU-0): 
[   189.073] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[   189.073] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[   189.073] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[   189.073] (--) NVIDIA(GPU-0): 
[   189.102] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): connected
[   189.102] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): Internal TMDS
[   189.102] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[   189.102] (--) NVIDIA(GPU-0): 
[   189.103] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   189.103] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   189.103] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[   189.103] (--) NVIDIA(GPU-0): 
[   189.103] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   189.103] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   189.103] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   189.103] (--) NVIDIA(GPU-0): 

Offline

#7 25.06.2020 19:44:50

eiPai7de
Gast

Re: Nvidia GTX 1050 ti unter funktioniert unter KDE nicht richtig.

LotosKaiser04 schrieb:

Meine Treiber: Nvidia lib32-Nvidia

Es gibt kein Paket "lib32-Nvidia", damit geht es ja schon los! Und mit solchen unpräzisen Beschreibungen erwartest du, dass ein Außenstehender errät, was du tatsächlich installiert hast, und wo es möglicherweise klemmt?

#8 25.06.2020 19:47:15

eiPai7de
Gast

Re: Nvidia GTX 1050 ti unter funktioniert unter KDE nicht richtig.

Nick_0278 schrieb:

Genau, für ein 32Bit System müsste er da mal vorbeischauen https://archlinux32.org/

Das ist dummes Zeug! Wer beispielsweise wine installiert, benötigt auch jede Menge 32-Bit-Bibliotheken aus dem multilib-Repo.

#9 25.06.2020 19:55:01

LotosKaiser04
Mitglied

Re: Nvidia GTX 1050 ti unter funktioniert unter KDE nicht richtig.

eiPai7de schrieb:
LotosKaiser04 schrieb:

Meine Treiber: Nvidia lib32-Nvidia

Es gibt kein Paket "lib32-Nvidia", damit geht es ja schon los! Und mit solchen unpräzisen Beschreibungen erwartest du, dass ein Außenstehender errät, was du tatsächlich installiert hast, und wo es möglicherweise klemmt?

Schuldig ich hab mich vertan ich meinte natürlich lib32-nvidia-utils. Und diese hab ich für Wine installiert und weil ich auch unter Linux ab und zu zocke.

Offline

#10 25.06.2020 20:32:30

LotosKaiser04
Mitglied

Re: Nvidia GTX 1050 ti unter funktioniert unter KDE nicht richtig.

LotosKaiser04 schrieb:

Ich habe nun mal in  der Xorg.0.log Datei geguckt und wie ich das verstehe wird das alle richtig geladen. Heute ist mir aber aufgefallen das es nur Probleme beim start gibt. Also Pixelfehler und langsame Animationen. Wen ich KDE dann benutze funktoniert es super sprich keine Fehler oder AnimationsFehler. Das einzige was mir aufgefallen ist das die Animation bei starten von Apps manchmal Ruckeln was man aber ausstellen kann. Vieleicht liegt es ja wirklich irgendwie an Xorg das es am Anfang Probleme hat und es dadurch durscheinander kommt.

Hier meine Xorg.0.log Datei:

[   183.409] (--) Log file renamed from "/var/log/Xorg.pid-1716.log" to "/var/log/Xorg.0.log"
[   183.410] 
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[   183.410] Build Operating System: Linux Arch Linux
[   183.410] Current Operating System: Linux PC-Alex 5.7.5-arch1-1 #1 SMP PREEMPT Mon, 22 Jun 2020 08:10:02 +0000 x86_64
[   183.410] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b1517a8d-b4a7-446d-a800-3e8edf8809b7 rw loglevel=3 quiet
[   183.410] Build Date: 05 May 2020  05:08:17AM
[   183.410]  
[   183.410] Current version of pixman: 0.40.0
[   183.410] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   183.410] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   183.410] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 25 17:28:51 2020
[   183.410] (==) Using config file: "/etc/X11/xorg.conf"
[   183.410] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   183.411] (==) ServerLayout "Layout0"
[   183.411] (**) |-->Screen "Screen0" (0)
[   183.411] (**) |   |-->Monitor "Monitor0"
[   183.411] (**) |   |-->Device "Device0"
[   183.411] (**) |-->Input Device "Keyboard0"
[   183.411] (**) |-->Input Device "Mouse0"
[   183.411] (**) Option "Xinerama" "0"
[   183.411] (==) Automatically adding devices
[   183.411] (==) Automatically enabling devices
[   183.411] (==) Automatically adding GPU devices
[   183.411] (==) Automatically binding GPU devices
[   183.411] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   183.411] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[   183.411] 	Entry deleted from font path.
[   183.411] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[   183.411] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   183.411] 	Entry deleted from font path.
[   183.411] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   183.411] 	Entry deleted from font path.
[   183.411] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[   183.411] (==) ModulePath set to "/usr/lib/xorg/modules"
[   183.411] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[   183.411] (WW) Disabling Keyboard0
[   183.411] (WW) Disabling Mouse0
[   183.411] (II) Module ABI versions:
[   183.411] 	X.Org ANSI C Emulation: 0.4
[   183.411] 	X.Org Video Driver: 24.1
[   183.411] 	X.Org XInput driver : 24.1
[   183.411] 	X.Org Server Extension : 10.0
[   183.412] (++) using VT number 1

[   183.412] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   183.412] (II) xfree86: Adding drm device (/dev/dri/card1)
[   183.412] (II) xfree86: Adding drm device (/dev/dri/card0)
[   183.413] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[   183.415] (--) PCI: (0@0:2:0) 8086:0102:1043:844d rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[   183.415] (--) PCI:*(1@0:0:0) 10de:1c82:1458:3763 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[   183.415] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   183.415] (II) LoadModule: "glx"
[   183.415] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   183.416] (II) Module glx: vendor="X.Org Foundation"
[   183.416] 	compiled for 1.20.8, module version = 1.0.0
[   183.416] 	ABI class: X.Org Server Extension, version 10.0
[   183.416] (II) LoadModule: "nvidia"
[   183.416] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   183.416] (II) Module nvidia: vendor="NVIDIA Corporation"
[   183.416] 	compiled for 1.6.99.901, module version = 1.0.0
[   183.416] 	Module class: X.Org Video Driver
[   183.416] (II) NVIDIA dlloader X Driver  440.82  Wed Apr  1 19:50:17 UTC 2020
[   183.416] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   183.416] (II) Loading sub module "fb"
[   183.416] (II) LoadModule: "fb"
[   183.417] (II) Loading /usr/lib/xorg/modules/libfb.so
[   183.417] (II) Module fb: vendor="X.Org Foundation"
[   183.417] 	compiled for 1.20.8, module version = 1.0.0
[   183.417] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   183.417] (II) Loading sub module "wfb"
[   183.417] (II) LoadModule: "wfb"
[   183.417] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   183.417] (II) Module wfb: vendor="X.Org Foundation"
[   183.417] 	compiled for 1.20.8, module version = 1.0.0
[   183.417] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   183.417] (II) Loading sub module "ramdac"
[   183.417] (II) LoadModule: "ramdac"
[   183.417] (II) Module "ramdac" already built-in
[   183.417] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[   183.417] (==) NVIDIA(0): RGB weight 888
[   183.417] (==) NVIDIA(0): Default visual is TrueColor
[   183.417] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   183.417] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[   183.417] (**) NVIDIA(0): Option "Stereo" "0"
[   183.417] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[   183.417] (**) NVIDIA(0): Option "SLI" "Off"
[   183.417] (**) NVIDIA(0): Option "MultiGPU" "Off"
[   183.417] (**) NVIDIA(0): Option "BaseMosaic" "off"
[   183.417] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[   183.417] (**) NVIDIA(0): Stereo disabled by request
[   183.417] (**) NVIDIA(0): NVIDIA SLI disabled.
[   183.417] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[   183.417] (**) NVIDIA(0): Option "MetaModes" "DVI-D-0: nvidia-auto-select +0+90, HDMI-0: nvidia-auto-select +1440+0"
[   183.417] (**) NVIDIA(0): Enabling 2D acceleration
[   183.417] (II) Loading sub module "glxserver_nvidia"
[   183.417] (II) LoadModule: "glxserver_nvidia"
[   183.417] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[   183.423] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[   183.423] 	compiled for 1.6.99.901, module version = 1.0.0
[   183.423] 	Module class: X.Org Server Extension
[   183.423] (II) NVIDIA GLX Module  440.82  Wed Apr  1 19:47:36 UTC 2020
[   183.423] (II) NVIDIA: The X server supports PRIME Render Offload.
[   183.433] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[   183.433] (--) NVIDIA(0):     DFP-0 (boot)
[   183.433] (--) NVIDIA(0):     DFP-1 (boot)
[   183.433] (--) NVIDIA(0):     DFP-2
[   183.433] (--) NVIDIA(0):     DFP-3
[   183.433] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 Ti (GP107-A) at PCI:1:0:0 (GPU-0)
[   183.433] (--) NVIDIA(0): Memory: 4194304 kBytes
[   183.433] (--) NVIDIA(0): VideoBIOS: 86.07.42.00.99
[   183.433] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   183.448] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[   183.448] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[   183.448] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[   183.448] (--) NVIDIA(GPU-0): 
[   183.477] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): connected
[   183.477] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): Internal TMDS
[   183.477] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[   183.477] (--) NVIDIA(GPU-0): 
[   183.477] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   183.477] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   183.477] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[   183.477] (--) NVIDIA(GPU-0): 
[   183.478] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   183.478] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   183.478] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   183.478] (--) NVIDIA(GPU-0): 
[   183.486] (II) NVIDIA(0): Validated MetaModes:
[   183.486] (II) NVIDIA(0):    
[   183.486] (II) NVIDIA(0):     "DVI-D-0:nvidia-auto-select+0+90,HDMI-0:nvidia-auto-select+1440+0"
[   183.486] (II) NVIDIA(0): Virtual screen size determined to be 3360 x 1080
[   183.490] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[   183.490] (--) NVIDIA(0):     option
[   183.490] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[   183.490] (II) NVIDIA:     access.
[   183.493] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   183.493] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   183.493] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   183.493] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   183.493] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   183.493] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   183.493] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   183.493] (II) NVIDIA(0):     Config Options in the README.
[   183.516] (II) NVIDIA(0): Setting mode "DVI-D-0:nvidia-auto-select+0+90,HDMI-0:nvidia-auto-select+1440+0"
[   183.584] (==) NVIDIA(0): Disabling shared memory pixmaps
[   183.584] (==) NVIDIA(0): Backing store enabled
[   183.584] (==) NVIDIA(0): Silken mouse disabled
[   183.584] (**) NVIDIA(0): DPMS enabled
[   183.584] (II) Loading sub module "dri2"
[   183.584] (II) LoadModule: "dri2"
[   183.584] (II) Module "dri2" already built-in
[   183.584] (II) NVIDIA(0): [DRI2] Setup complete
[   183.584] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   183.584] (II) Initializing extension Generic Event Extension
[   183.585] (II) Initializing extension SHAPE
[   183.585] (II) Initializing extension MIT-SHM
[   183.585] (II) Initializing extension XInputExtension
[   183.585] (II) Initializing extension XTEST
[   183.585] (II) Initializing extension BIG-REQUESTS
[   183.585] (II) Initializing extension SYNC
[   183.585] (II) Initializing extension XKEYBOARD
[   183.585] (II) Initializing extension XC-MISC
[   183.585] (II) Initializing extension SECURITY
[   183.585] (II) Initializing extension XFIXES
[   183.585] (II) Initializing extension RENDER
[   183.586] (II) Initializing extension RANDR
[   183.586] (II) Initializing extension COMPOSITE
[   183.586] (II) Initializing extension DAMAGE
[   183.586] (II) Initializing extension MIT-SCREEN-SAVER
[   183.586] (II) Initializing extension DOUBLE-BUFFER
[   183.586] (II) Initializing extension RECORD
[   183.586] (II) Initializing extension DPMS
[   183.586] (II) Initializing extension Present
[   183.586] (II) Initializing extension DRI3
[   183.586] (II) Initializing extension X-Resource
[   183.586] (II) Initializing extension XVideo
[   183.586] (II) Initializing extension XVideo-MotionCompensation
[   183.586] (II) Initializing extension GLX
[   183.587] (II) Initializing extension GLX
[   183.587] (II) Indirect GLX disabled.
[   183.587] (II) GLX: Another vendor is already registered for screen 0
[   183.587] (II) Initializing extension XFree86-VidModeExtension
[   183.587] (II) Initializing extension XFree86-DGA
[   183.587] (II) Initializing extension XFree86-DRI
[   183.587] (II) Initializing extension DRI2
[   183.587] (II) Initializing extension NV-GLX
[   183.587] (II) Initializing extension NV-CONTROL
[   183.587] (II) Initializing extension XINERAMA
[   183.652] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   183.652] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   183.652] (II) LoadModule: "libinput"
[   183.652] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   183.653] (II) Module libinput: vendor="X.Org Foundation"
[   183.653] 	compiled for 1.20.8, module version = 0.30.0
[   183.653] 	Module class: X.Org XInput Driver
[   183.653] 	ABI class: X.Org XInput driver, version 24.1
[   183.653] (II) Using input driver 'libinput' for 'Power Button'
[   183.653] (**) Power Button: always reports core events
[   183.653] (**) Option "Device" "/dev/input/event1"
[   183.653] (**) Option "_source" "server/udev"
[   183.654] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   183.655] (II) event1  - Power Button: device is a keyboard
[   183.655] (II) event1  - Power Button: device removed
[   183.683] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[   183.683] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   183.684] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   183.684] (II) event1  - Power Button: device is a keyboard
[   183.684] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[   183.685] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   183.685] (II) Using input driver 'libinput' for 'Video Bus'
[   183.685] (**) Video Bus: always reports core events
[   183.685] (**) Option "Device" "/dev/input/event2"
[   183.685] (**) Option "_source" "server/udev"
[   183.685] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[   183.685] (II) event2  - Video Bus: device is a keyboard
[   183.686] (II) event2  - Video Bus: device removed
[   183.735] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[   183.735] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   183.737] (II) event2  - Video Bus: is tagged by udev as: Keyboard
[   183.737] (II) event2  - Video Bus: device is a keyboard
[   183.738] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   183.738] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   183.738] (II) Using input driver 'libinput' for 'Power Button'
[   183.738] (**) Power Button: always reports core events
[   183.738] (**) Option "Device" "/dev/input/event0"
[   183.738] (**) Option "_source" "server/udev"
[   183.740] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   183.740] (II) event0  - Power Button: device is a keyboard
[   183.740] (II) event0  - Power Button: device removed
[   183.764] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[   183.764] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   183.766] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   183.766] (II) event0  - Power Button: device is a keyboard
[   183.768] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10)
[   183.768] (II) No input driver specified, ignoring this device.
[   183.768] (II) This device may have been added with another device file.
[   183.768] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event11)
[   183.768] (II) No input driver specified, ignoring this device.
[   183.768] (II) This device may have been added with another device file.
[   183.769] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[   183.769] (II) No input driver specified, ignoring this device.
[   183.769] (II) This device may have been added with another device file.
[   183.769] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[   183.769] (II) No input driver specified, ignoring this device.
[   183.769] (II) This device may have been added with another device file.
[   183.770] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event14)
[   183.770] (II) No input driver specified, ignoring this device.
[   183.770] (II) This device may have been added with another device file.
[   183.771] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=11 (/dev/input/event15)
[   183.771] (II) No input driver specified, ignoring this device.
[   183.771] (II) This device may have been added with another device file.
[   183.772] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event17)
[   183.772] (II) No input driver specified, ignoring this device.
[   183.772] (II) This device may have been added with another device file.
[   183.772] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event18)
[   183.772] (II) No input driver specified, ignoring this device.
[   183.772] (II) This device may have been added with another device file.
[   183.773] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event19)
[   183.773] (II) No input driver specified, ignoring this device.
[   183.773] (II) This device may have been added with another device file.
[   183.773] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event20)
[   183.773] (II) No input driver specified, ignoring this device.
[   183.773] (II) This device may have been added with another device file.
[   183.774] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event21)
[   183.774] (II) No input driver specified, ignoring this device.
[   183.774] (II) This device may have been added with another device file.
[   183.775] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event22)
[   183.775] (II) No input driver specified, ignoring this device.
[   183.775] (II) This device may have been added with another device file.
[   183.775] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/event3)
[   183.775] (**) Logitech Gaming Mouse G502: Applying InputClass "libinput pointer catchall"
[   183.775] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502'
[   183.775] (**) Logitech Gaming Mouse G502: always reports core events
[   183.775] (**) Option "Device" "/dev/input/event3"
[   183.775] (**) Option "_source" "server/udev"
[   183.833] (II) event3  - Logitech Gaming Mouse G502: is tagged by udev as: Mouse
[   183.834] (II) event3  - Logitech Gaming Mouse G502: device is a pointer
[   183.834] (II) event3  - Logitech Gaming Mouse G502: device removed
[   183.884] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:046D:C07D.0001/input/input3/event3"
[   183.884] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502" (type: MOUSE, id 9)
[   183.885] (**) Option "AccelerationScheme" "none"
[   183.885] (**) Logitech Gaming Mouse G502: (accel) selected scheme none/0
[   183.885] (**) Logitech Gaming Mouse G502: (accel) acceleration factor: 2.000
[   183.885] (**) Logitech Gaming Mouse G502: (accel) acceleration threshold: 4
[   183.943] (II) event3  - Logitech Gaming Mouse G502: is tagged by udev as: Mouse
[   183.944] (II) event3  - Logitech Gaming Mouse G502: device is a pointer
[   183.945] (II) config/udev: Adding input device Logitech Gaming Mouse G502 (/dev/input/mouse0)
[   183.945] (II) No input driver specified, ignoring this device.
[   183.945] (II) This device may have been added with another device file.
[   183.946] (II) config/udev: Adding input device Logitech Gaming Mouse G502 Keyboard (/dev/input/event4)
[   183.946] (**) Logitech Gaming Mouse G502 Keyboard: Applying InputClass "libinput keyboard catchall"
[   183.946] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Keyboard'
[   183.946] (**) Logitech Gaming Mouse G502 Keyboard: always reports core events
[   183.946] (**) Option "Device" "/dev/input/event4"
[   183.946] (**) Option "_source" "server/udev"
[   183.949] (II) event4  - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard
[   183.949] (II) event4  - Logitech Gaming Mouse G502 Keyboard: device is a keyboard
[   183.949] (II) event4  - Logitech Gaming Mouse G502 Keyboard: device removed
[   183.974] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/0003:046D:C07D.0002/input/input4/event4"
[   183.975] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Keyboard" (type: KEYBOARD, id 10)
[   183.977] (II) event4  - Logitech Gaming Mouse G502 Keyboard: is tagged by udev as: Keyboard
[   183.977] (II) event4  - Logitech Gaming Mouse G502 Keyboard: device is a keyboard
[   183.979] (II) config/udev: Adding input device Logitech Gaming Mouse G502 Consumer Control (/dev/input/event5)
[   183.979] (**) Logitech Gaming Mouse G502 Consumer Control: Applying InputClass "libinput keyboard catchall"
[   183.979] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Consumer Control'
[   183.979] (**) Logitech Gaming Mouse G502 Consumer Control: always reports core events
[   183.979] (**) Option "Device" "/dev/input/event5"
[   183.979] (**) Option "_source" "server/udev"
[   183.982] (II) event5  - Logitech Gaming Mouse G502 Consumer Control: is tagged by udev as: Keyboard
[   183.982] (II) event5  - Logitech Gaming Mouse G502 Consumer Control: device is a keyboard
[   183.982] (II) event5  - Logitech Gaming Mouse G502 Consumer Control: device removed
[   184.014] (II) libinput: Logitech Gaming Mouse G502 Consumer Control: needs a virtual subdevice
[   184.014] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/0003:046D:C07D.0002/input/input5/event5"
[   184.014] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Consumer Control" (type: MOUSE, id 11)
[   184.015] (**) Option "AccelerationScheme" "none"
[   184.015] (**) Logitech Gaming Mouse G502 Consumer Control: (accel) selected scheme none/0
[   184.015] (**) Logitech Gaming Mouse G502 Consumer Control: (accel) acceleration factor: 2.000
[   184.015] (**) Logitech Gaming Mouse G502 Consumer Control: (accel) acceleration threshold: 4
[   184.017] (II) event5  - Logitech Gaming Mouse G502 Consumer Control: is tagged by udev as: Keyboard
[   184.017] (II) event5  - Logitech Gaming Mouse G502 Consumer Control: device is a keyboard
[   184.019] (II) config/udev: Adding input device Logitech Gaming Mouse G502 System Control (/dev/input/event6)
[   184.019] (**) Logitech Gaming Mouse G502 System Control: Applying InputClass "libinput keyboard catchall"
[   184.019] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 System Control'
[   184.019] (**) Logitech Gaming Mouse G502 System Control: always reports core events
[   184.019] (**) Option "Device" "/dev/input/event6"
[   184.019] (**) Option "_source" "server/udev"
[   184.021] (II) event6  - Logitech Gaming Mouse G502 System Control: is tagged by udev as: Keyboard
[   184.022] (II) event6  - Logitech Gaming Mouse G502 System Control: device is a keyboard
[   184.022] (II) event6  - Logitech Gaming Mouse G502 System Control: device removed
[   184.041] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/0003:046D:C07D.0002/input/input6/event6"
[   184.041] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 System Control" (type: KEYBOARD, id 12)
[   184.044] (II) event6  - Logitech Gaming Mouse G502 System Control: is tagged by udev as: Keyboard
[   184.044] (II) event6  - Logitech Gaming Mouse G502 System Control: device is a keyboard
[   184.046] (II) config/udev: Adding input device Logitech Gaming Keyboard G105 (/dev/input/event7)
[   184.046] (**) Logitech Gaming Keyboard G105: Applying InputClass "libinput keyboard catchall"
[   184.046] (II) Using input driver 'libinput' for 'Logitech Gaming Keyboard G105'
[   184.046] (**) Logitech Gaming Keyboard G105: always reports core events
[   184.046] (**) Option "Device" "/dev/input/event7"
[   184.046] (**) Option "_source" "server/udev"
[   184.048] (II) event7  - Logitech Gaming Keyboard G105: is tagged by udev as: Keyboard
[   184.048] (II) event7  - Logitech Gaming Keyboard G105: device is a keyboard
[   184.049] (II) event7  - Logitech Gaming Keyboard G105: device removed
[   184.068] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.0/0003:046D:C248.0003/input/input9/event7"
[   184.068] (II) XINPUT: Adding extended input device "Logitech Gaming Keyboard G105" (type: KEYBOARD, id 13)
[   184.070] (II) event7  - Logitech Gaming Keyboard G105: is tagged by udev as: Keyboard
[   184.071] (II) event7  - Logitech Gaming Keyboard G105: device is a keyboard
[   184.072] (II) config/udev: Adding input device Logitech Gaming Keyboard G105 Consumer Control (/dev/input/event8)
[   184.072] (**) Logitech Gaming Keyboard G105 Consumer Control: Applying InputClass "libinput keyboard catchall"
[   184.072] (II) Using input driver 'libinput' for 'Logitech Gaming Keyboard G105 Consumer Control'
[   184.072] (**) Logitech Gaming Keyboard G105 Consumer Control: always reports core events
[   184.072] (**) Option "Device" "/dev/input/event8"
[   184.072] (**) Option "_source" "server/udev"
[   184.074] (II) event8  - Logitech Gaming Keyboard G105 Consumer Control: is tagged by udev as: Keyboard
[   184.075] (II) event8  - Logitech Gaming Keyboard G105 Consumer Control: device is a keyboard
[   184.075] (II) event8  - Logitech Gaming Keyboard G105 Consumer Control: device removed
[   184.134] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/4-1.4:1.1/0003:046D:C248.0004/input/input10/event8"
[   184.134] (II) XINPUT: Adding extended input device "Logitech Gaming Keyboard G105 Consumer Control" (type: KEYBOARD, id 14)
[   184.137] (II) event8  - Logitech Gaming Keyboard G105 Consumer Control: is tagged by udev as: Keyboard
[   184.137] (II) event8  - Logitech Gaming Keyboard G105 Consumer Control: device is a keyboard
[   184.138] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event16)
[   184.138] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[   184.138] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[   184.138] (**) Eee PC WMI hotkeys: always reports core events
[   184.138] (**) Option "Device" "/dev/input/event16"
[   184.138] (**) Option "_source" "server/udev"
[   184.140] (II) event16 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[   184.140] (II) event16 - Eee PC WMI hotkeys: device is a keyboard
[   184.140] (II) event16 - Eee PC WMI hotkeys: device removed
[   184.214] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input19/event16"
[   184.214] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 15)
[   184.216] (II) event16 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[   184.216] (II) event16 - Eee PC WMI hotkeys: device is a keyboard
[   184.217] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[   184.217] (II) No input driver specified, ignoring this device.
[   184.217] (II) This device may have been added with another device file.
[   184.225] (**) Logitech Gaming Mouse G502 Consumer Control: Applying InputClass "libinput keyboard catchall"
[   184.225] (II) Using input driver 'libinput' for 'Logitech Gaming Mouse G502 Consumer Control'
[   184.225] (**) Logitech Gaming Mouse G502 Consumer Control: always reports core events
[   184.225] (**) Option "Device" "/dev/input/event5"
[   184.225] (**) Option "_source" "_driver/libinput"
[   184.225] (II) libinput: Logitech Gaming Mouse G502 Consumer Control: is a virtual subdevice
[   184.225] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/0003:046D:C07D.0002/input/input5/event5"
[   184.225] (II) XINPUT: Adding extended input device "Logitech Gaming Mouse G502 Consumer Control" (type: KEYBOARD, id 16)
[   184.227] (EE) Failed to open authorization file "/var/run/sddm/{a43c679f-fb5c-47c0-b32b-0903a19730ea}": No such file or directory
[   187.465] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[   187.465] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[   187.466] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[   187.466] (--) NVIDIA(GPU-0): 
[   187.495] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): connected
[   187.495] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): Internal TMDS
[   187.495] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[   187.495] (--) NVIDIA(GPU-0): 
[   187.495] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   187.495] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   187.495] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[   187.495] (--) NVIDIA(GPU-0): 
[   187.496] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   187.496] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   187.496] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   187.496] (--) NVIDIA(GPU-0): 
[   189.073] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[   189.073] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[   189.073] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[   189.073] (--) NVIDIA(GPU-0): 
[   189.102] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): connected
[   189.102] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): Internal TMDS
[   189.102] (--) NVIDIA(GPU-0): OEM 19W_LCD_TV (DFP-1): 600.0 MHz maximum pixel clock
[   189.102] (--) NVIDIA(GPU-0): 
[   189.103] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   189.103] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   189.103] (--) NVIDIA(GPU-0): DFP-2: 1440.0 MHz maximum pixel clock
[   189.103] (--) NVIDIA(GPU-0): 
[   189.103] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   189.103] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   189.103] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   189.103] (--) NVIDIA(GPU-0): 

Fällt euch an der Xorg.0.log vieleicht was auf?

Offline

Schnellantwort auf dieses Thema

Schreibe deinen Beitrag und versende ihn
Deine Antwort

Fußzeile des Forums