Du bist nicht angemeldet.

#1 18.04.2020 12:03:56

Pyfisch
Mitglied

Defekte SSD?

Hallo,

ich habe einen Windows-PC für Spiele. Seit einem Windows-Update bootet das Gerät nicht mehr und ich habe es auch weder geschafft die Installation zu reparieren noch Windows neu aufzusetzen. Bevor das Thema hier als Off-Topic geschlossen wird, ich habe den Computer von einem Arch-USB-Stick gestartet und festgestellt, dass die SSD anscheinend Probleme hat.

Zwar kann ich von Linux aus das NTFS Dateisystem auf der SSD einhängen (Warnungen Windows is hibernated, refused to mount. ... Falling back to read-only mount because the NTFS partition is in an unsafe state. ...) und Dateien lesen, aber ich kann nicht mit gdisk eine neue Partitionstabelle erstellen oder sonstwie schreiben.


Die Ausgabe von smartctl -a /dev/sda zeigt PASSED als "overall-health self-assesment" an, die SSD ist mit 516 Betriebsstunden auch noch fast neu.


smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.15-arch1-1] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     SATAFIRM   S11
Serial Number:    50026B76820CB556
LU WWN Device Id: 5 0026b7 6820cb556
Firmware Version: SBFK71W1
User Capacity:    240,057,409,536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-3 T13/2161-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Apr 16 21:33:41 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Total time to complete Offline 
data collection: 		(65535) seconds.
Offline data collection
capabilities: 			 (0x00) 	Offline data collection not supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0032   099   099   000    Old_age   Always       -       1377
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       516
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       465
148 Unknown_Attribute       0x0000   255   255   000    Old_age   Offline      -       44
149 Unknown_Attribute       0x0000   255   255   000    Old_age   Offline      -       331
167 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       3
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       0
169 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       57
170 Unknown_Attribute       0x0000   100   100   010    Old_age   Offline      -       13
172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
173 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       589847
181 Program_Fail_Cnt_Total  0x0032   100   100   000    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0000   255   255   000    Old_age   Offline      -       18
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       54
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       135
194 Temperature_Celsius     0x0022   075   057   000    Old_age   Always       -       25 (Min/Max 18/43)
196 Reallocated_Event_Count 0x0000   100   100   000    Old_age   Offline      -       72
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       0
218 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       0
231 Temperature_Celsius     0x0013   100   100   000    Pre-fail  Always       -       99
233 Media_Wearout_Indicator 0x0013   100   100   000    Pre-fail  Always       -       2368
241 Total_LBAs_Written      0x0012   100   100   000    Old_age   Always       -       2010
242 Total_LBAs_Read         0x0012   100   100   000    Old_age   Always       -       2774
244 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       9
245 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       23
246 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      -       99620

SMART Error Log Version: 1
ATA Error Count: 417 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 417 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 71 08 d8 67 4a e0  Device Fault; Error: UNC 8 sectors at LBA = 0x004a67d8 = 4876248

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 d8 67 4a e0 08      00:00:00.000  READ DMA
  ef 10 02 00 00 00 a0 08      00:00:00.000  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 08      00:00:00.000  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:00:00.000  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:00:00.000  SET FEATURES [Set transfer mode]

Error 416 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 71 08 d8 67 4a e0  Device Fault; Error: UNC 8 sectors at LBA = 0x004a67d8 = 4876248

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 d8 67 4a e0 08      00:00:00.000  READ DMA
  ef 10 02 00 00 00 a0 08      00:00:00.000  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 08      00:00:00.000  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:00:00.000  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:00:00.000  SET FEATURES [Set transfer mode]

Error 415 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 71 08 d8 67 4a e0  Device Fault; Error: UNC 8 sectors at LBA = 0x004a67d8 = 4876248

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 d8 67 4a e0 08      00:00:00.000  READ DMA
  ef 10 02 00 00 00 a0 08      00:00:00.000  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 08      00:00:00.000  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:00:00.000  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:00:00.000  SET FEATURES [Set transfer mode]

Error 414 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 71 08 d8 67 4a e0  Device Fault; Error: UNC 8 sectors at LBA = 0x004a67d8 = 4876248

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 d8 67 4a e0 08      00:00:00.000  READ DMA
  ef 10 02 00 00 00 a0 08      00:00:00.000  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 08      00:00:00.000  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:00:00.000  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:00:00.000  SET FEATURES [Set transfer mode]

Error 413 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 71 08 30 60 4a e0  Device Fault; Error: UNC 8 sectors at LBA = 0x004a6030 = 4874288

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 30 60 4a e0 08      00:00:00.000  READ DMA
  ef 10 02 00 00 00 a0 08      00:00:00.000  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 08      00:00:00.000  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:00:00.000  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:00:00.000  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

In der Ausgabe von dmesg findet sich eine Reihe von SSD-Fehlern (Zeilen mit ata6.00), unter anderem failed command: FLUSH CACHE EXT.

[    0.485678] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.485848] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.485971] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
[    0.486029] pci 0000:00:08.1: enabling Extended Tags
[    0.486091] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.486218] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
[    0.486276] pci 0000:00:08.2: enabling Extended Tags
[    0.486332] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[    0.486481] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.486687] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.486891] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
[    0.486953] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
[    0.487018] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
[    0.487083] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
[    0.487141] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
[    0.487198] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
[    0.487256] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
[    0.487329] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
[    0.487475] pci 0000:15:00.0: [1022:43bb] type 00 class 0x0c0330
[    0.487505] pci 0000:15:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit]
[    0.487615] pci 0000:15:00.0: PME# supported from D3hot D3cold
[    0.487730] pci 0000:15:00.1: [1022:43b7] type 00 class 0x010601
[    0.487791] pci 0000:15:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff]
[    0.487800] pci 0000:15:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref]
[    0.487853] pci 0000:15:00.1: PME# supported from D3hot D3cold
[    0.487934] pci 0000:15:00.2: [1022:43b2] type 01 class 0x060400
[    0.488042] pci 0000:15:00.2: PME# supported from D3hot D3cold
[    0.488186] pci 0000:00:01.2: PCI bridge to [bus 15-21]
[    0.488191] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.488194] pci 0000:00:01.2:   bridge window [mem 0xfe600000-0xfe8fffff]
[    0.488303] pci 0000:16:00.0: [1022:43b4] type 01 class 0x060400
[    0.488431] pci 0000:16:00.0: PME# supported from D3hot D3cold
[    0.488547] pci 0000:16:01.0: [1022:43b4] type 01 class 0x060400
[    0.488675] pci 0000:16:01.0: PME# supported from D3hot D3cold
[    0.488787] pci 0000:16:04.0: [1022:43b4] type 01 class 0x060400
[    0.488915] pci 0000:16:04.0: PME# supported from D3hot D3cold
[    0.489024] pci 0000:16:06.0: [1022:43b4] type 01 class 0x060400
[    0.489152] pci 0000:16:06.0: PME# supported from D3hot D3cold
[    0.489262] pci 0000:16:07.0: [1022:43b4] type 01 class 0x060400
[    0.489390] pci 0000:16:07.0: PME# supported from D3hot D3cold
[    0.489515] pci 0000:15:00.2: PCI bridge to [bus 16-21]
[    0.489521] pci 0000:15:00.2:   bridge window [io  0xf000-0xffff]
[    0.489524] pci 0000:15:00.2:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.489589] pci 0000:17:00.0: [1b21:1080] type 01 class 0x060400
[    0.489815] pci 0000:17:00.0: supports D1 D2
[    0.489815] pci 0000:17:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.500046] pci 0000:16:00.0: PCI bridge to [bus 17-18]
[    0.500144] pci_bus 0000:18: extended config space not accessible
[    0.500274] pci 0000:17:00.0: PCI bridge to [bus 18]
[    0.500398] pci 0000:1e:00.0: [10ec:8168] type 00 class 0x020000
[    0.500452] pci 0000:1e:00.0: reg 0x10: [io  0xf000-0xf0ff]
[    0.500498] pci 0000:1e:00.0: reg 0x18: [mem 0xfe704000-0xfe704fff 64bit]
[    0.500527] pci 0000:1e:00.0: reg 0x20: [mem 0xfe700000-0xfe703fff 64bit]
[    0.500709] pci 0000:1e:00.0: supports D1 D2
[    0.500710] pci 0000:1e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.500929] pci 0000:16:01.0: PCI bridge to [bus 1e]
[    0.500935] pci 0000:16:01.0:   bridge window [io  0xf000-0xffff]
[    0.500939] pci 0000:16:01.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.501013] pci 0000:16:04.0: PCI bridge to [bus 1f]
[    0.501096] pci 0000:20:00.0: [8086:24fd] type 00 class 0x028000
[    0.501171] pci 0000:20:00.0: reg 0x10: [mem 0xfe600000-0xfe601fff 64bit]
[    0.501448] pci 0000:20:00.0: PME# supported from D0 D3hot D3cold
[    0.501689] pci 0000:16:06.0: PCI bridge to [bus 20]
[    0.501698] pci 0000:16:06.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.501750] pci 0000:16:07.0: PCI bridge to [bus 21]
[    0.501922] pci 0000:38:00.0: [1002:15dd] type 00 class 0x030000
[    0.501969] pci 0000:38:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.501987] pci 0000:38:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.501999] pci 0000:38:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.502011] pci 0000:38:00.0: reg 0x24: [mem 0xfe500000-0xfe57ffff]
[    0.502031] pci 0000:38:00.0: enabling Extended Tags
[    0.502150] pci 0000:38:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.502308] pci 0000:38:00.1: [1002:15de] type 00 class 0x040300
[    0.502338] pci 0000:38:00.1: reg 0x10: [mem 0xfe588000-0xfe58bfff]
[    0.502410] pci 0000:38:00.1: enabling Extended Tags
[    0.502481] pci 0000:38:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.502576] pci 0000:38:00.2: [1022:15df] type 00 class 0x108000
[    0.502627] pci 0000:38:00.2: reg 0x18: [mem 0xfe400000-0xfe4fffff]
[    0.502659] pci 0000:38:00.2: reg 0x24: [mem 0xfe58c000-0xfe58dfff]
[    0.502679] pci 0000:38:00.2: enabling Extended Tags
[    0.502860] pci 0000:38:00.3: [1022:15e0] type 00 class 0x0c0330
[    0.502895] pci 0000:38:00.3: reg 0x10: [mem 0xfe300000-0xfe3fffff 64bit]
[    0.502956] pci 0000:38:00.3: enabling Extended Tags
[    0.503035] pci 0000:38:00.3: PME# supported from D0 D3hot D3cold
[    0.503397] pci 0000:38:00.4: [1022:15e1] type 00 class 0x0c0330
[    0.503432] pci 0000:38:00.4: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit]
[    0.503493] pci 0000:38:00.4: enabling Extended Tags
[    0.503573] pci 0000:38:00.4: PME# supported from D0 D3hot D3cold
[    0.503690] pci 0000:38:00.6: [1022:15e3] type 00 class 0x040300
[    0.503719] pci 0000:38:00.6: reg 0x10: [mem 0xfe580000-0xfe587fff]
[    0.503791] pci 0000:38:00.6: enabling Extended Tags
[    0.503863] pci 0000:38:00.6: PME# supported from D0 D3hot D3cold
[    0.504023] pci 0000:00:08.1: PCI bridge to [bus 38]
[    0.504029] pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
[    0.504032] pci 0000:00:08.1:   bridge window [mem 0xfe200000-0xfe5fffff]
[    0.504038] pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.504136] pci 0000:39:00.0: [1022:7901] type 00 class 0x010601
[    0.504220] pci 0000:39:00.0: reg 0x24: [mem 0xfe900000-0xfe9007ff]
[    0.504239] pci 0000:39:00.0: enabling Extended Tags
[    0.504319] pci 0000:39:00.0: PME# supported from D3hot D3cold
[    0.504448] pci 0000:00:08.2: PCI bridge to [bus 39]
[    0.504456] pci 0000:00:08.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.505111] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.505175] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.505229] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.505300] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.505361] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.505412] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.505464] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.505513] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.506672] iommu: Default domain type: Translated 
[    0.506693] pci 0000:38:00.0: vgaarb: setting as boot VGA device
[    0.506695] pci 0000:38:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.506696] pci 0000:38:00.0: vgaarb: bridge control possible
[    0.506697] vgaarb: loaded
[    0.506902] ACPI: bus type USB registered
[    0.506916] usbcore: registered new interface driver usbfs
[    0.506920] usbcore: registered new interface driver hub
[    0.506941] usbcore: registered new device driver usb
[    0.506970] pps_core: LinuxPPS API ver. 1 registered
[    0.506971] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.506972] PTP clock support registered
[    0.506976] EDAC MC: Ver: 3.0.0
[    0.507123] PCI: Using ACPI for IRQ routing
[    0.509473] PCI: pci_cache_line_size set to 64 bytes
[    0.509570] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.509571] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
[    0.509571] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.509572] e820: reserve RAM buffer [mem 0x5d1ac000-0x5fffffff]
[    0.509573] e820: reserve RAM buffer [mem 0x5d3b7000-0x5fffffff]
[    0.509573] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff]
[    0.509574] e820: reserve RAM buffer [mem 0x41f340000-0x41fffffff]
[    0.510010] NetLabel: Initializing
[    0.510010] NetLabel:  domain hash size = 128
[    0.510010] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.510010] NetLabel:  unlabeled traffic allowed by default
[    0.510142] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.510147] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.513340] clocksource: Switched to clocksource tsc-early
[    0.526085] *** VALIDATE bpf ***
[    0.526208] VFS: Disk quotas dquot_6.6.0
[    0.526255] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.526283] *** VALIDATE ramfs ***
[    0.526311] *** VALIDATE hugetlbfs ***
[    0.526360] pnp: PnP ACPI init
[    0.526528] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.526532] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.526606] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
[    0.526609] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.526713] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.526901] system 00:03: [io  0x0a00-0x0a0f] has been reserved
[    0.526902] system 00:03: [io  0x0a10-0x0a1f] has been reserved
[    0.526903] system 00:03: [io  0x0a20-0x0a2f] has been reserved
[    0.526904] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.526906] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.527216] pnp 00:04: [dma 0 disabled]
[    0.527328] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.527574] pnp 00:05: [dma 0 disabled]
[    0.527599] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.527802] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.527803] system 00:06: [io  0x040b] has been reserved
[    0.527804] system 00:06: [io  0x04d6] has been reserved
[    0.527805] system 00:06: [io  0x0c00-0x0c01] has been reserved
[    0.527806] system 00:06: [io  0x0c14] has been reserved
[    0.527806] system 00:06: [io  0x0c50-0x0c51] has been reserved
[    0.527807] system 00:06: [io  0x0c52] has been reserved
[    0.527808] system 00:06: [io  0x0c6c] has been reserved
[    0.527809] system 00:06: [io  0x0c6f] has been reserved
[    0.527809] system 00:06: [io  0x0cd0-0x0cd1] has been reserved
[    0.527810] system 00:06: [io  0x0cd2-0x0cd3] has been reserved
[    0.527811] system 00:06: [io  0x0cd4-0x0cd5] has been reserved
[    0.527812] system 00:06: [io  0x0cd6-0x0cd7] has been reserved
[    0.527813] system 00:06: [io  0x0cd8-0x0cdf] has been reserved
[    0.527813] system 00:06: [io  0x0800-0x089f] has been reserved
[    0.527814] system 00:06: [io  0x0b00-0x0b0f] has been reserved
[    0.527815] system 00:06: [io  0x0b20-0x0b3f] has been reserved
[    0.527816] system 00:06: [io  0x0900-0x090f] has been reserved
[    0.527816] system 00:06: [io  0x0910-0x091f] has been reserved
[    0.527818] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.527819] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.527820] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.527820] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.527821] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.527822] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.527823] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.527825] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.528237] pnp: PnP ACPI: found 7 devices
[    0.529595] thermal_sys: Registered thermal governor 'fair_share'
[    0.529596] thermal_sys: Registered thermal governor 'bang_bang'
[    0.529600] thermal_sys: Registered thermal governor 'step_wise'
[    0.529601] thermal_sys: Registered thermal governor 'user_space'
[    0.529601] thermal_sys: Registered thermal governor 'power_allocator'
[    0.534201] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.534229] pci 0000:17:00.0: PCI bridge to [bus 18]
[    0.534253] pci 0000:16:00.0: PCI bridge to [bus 17-18]
[    0.534265] pci 0000:16:01.0: PCI bridge to [bus 1e]
[    0.534267] pci 0000:16:01.0:   bridge window [io  0xf000-0xffff]
[    0.534272] pci 0000:16:01.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.534280] pci 0000:16:04.0: PCI bridge to [bus 1f]
[    0.534292] pci 0000:16:06.0: PCI bridge to [bus 20]
[    0.534296] pci 0000:16:06.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.534305] pci 0000:16:07.0: PCI bridge to [bus 21]
[    0.534316] pci 0000:15:00.2: PCI bridge to [bus 16-21]
[    0.534318] pci 0000:15:00.2:   bridge window [io  0xf000-0xffff]
[    0.534322] pci 0000:15:00.2:   bridge window [mem 0xfe600000-0xfe7fffff]
[    0.534330] pci 0000:00:01.2: PCI bridge to [bus 15-21]
[    0.534332] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.534336] pci 0000:00:01.2:   bridge window [mem 0xfe600000-0xfe8fffff]
[    0.534344] pci 0000:00:08.1: PCI bridge to [bus 38]
[    0.534350] pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
[    0.534354] pci 0000:00:08.1:   bridge window [mem 0xfe200000-0xfe5fffff]
[    0.534357] pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.534363] pci 0000:00:08.2: PCI bridge to [bus 39]
[    0.534367] pci 0000:00:08.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.534376] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.534377] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.534378] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.534378] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.534379] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.534380] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.534381] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.534381] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.534382] pci_bus 0000:15: resource 0 [io  0xf000-0xffff]
[    0.534383] pci_bus 0000:15: resource 1 [mem 0xfe600000-0xfe8fffff]
[    0.534384] pci_bus 0000:16: resource 0 [io  0xf000-0xffff]
[    0.534385] pci_bus 0000:16: resource 1 [mem 0xfe600000-0xfe7fffff]
[    0.534386] pci_bus 0000:1e: resource 0 [io  0xf000-0xffff]
[    0.534387] pci_bus 0000:1e: resource 1 [mem 0xfe700000-0xfe7fffff]
[    0.534388] pci_bus 0000:20: resource 1 [mem 0xfe600000-0xfe6fffff]
[    0.534388] pci_bus 0000:38: resource 0 [io  0xe000-0xefff]
[    0.534389] pci_bus 0000:38: resource 1 [mem 0xfe200000-0xfe5fffff]
[    0.534390] pci_bus 0000:38: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.534391] pci_bus 0000:39: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.534627] NET: Registered protocol family 2
[    0.535198] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.535323] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.535654] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.535766] TCP: Hash tables configured (established 131072 bind 65536)
[    0.535841] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.535896] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.536121] NET: Registered protocol family 1
[    0.536127] NET: Registered protocol family 44
[    0.536404] pci 0000:38:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.536413] pci 0000:38:00.1: D0 power state depends on 0000:38:00.0
[    0.536777] PCI: CLS 64 bytes, default 64
[    0.536845] Trying to unpack rootfs image as initramfs...
[    3.564289] Freeing initrd memory: 41004K
[    3.564317] pci 0000:00:00.2: AMD-Vi: Unable to write to IOMMU perf counter.
[    3.564576] pci 0000:00:00.2: can't derive routing for PCI INT A
[    3.564577] pci 0000:00:00.2: PCI INT A: not connected
[    3.565013] pci 0000:00:01.0: Adding to iommu group 0
[    3.565196] pci 0000:00:01.2: Adding to iommu group 1
[    3.565415] pci 0000:00:08.0: Adding to iommu group 2
[    3.565590] pci 0000:00:08.1: Adding to iommu group 3
[    3.565623] pci 0000:00:08.2: Adding to iommu group 2
[    3.565829] pci 0000:00:14.0: Adding to iommu group 4
[    3.565851] pci 0000:00:14.3: Adding to iommu group 4
[    3.566032] pci 0000:00:18.0: Adding to iommu group 5
[    3.566053] pci 0000:00:18.1: Adding to iommu group 5
[    3.566081] pci 0000:00:18.2: Adding to iommu group 5
[    3.566102] pci 0000:00:18.3: Adding to iommu group 5
[    3.566122] pci 0000:00:18.4: Adding to iommu group 5
[    3.566143] pci 0000:00:18.5: Adding to iommu group 5
[    3.566163] pci 0000:00:18.6: Adding to iommu group 5
[    3.566183] pci 0000:00:18.7: Adding to iommu group 5
[    3.566414] pci 0000:15:00.0: Adding to iommu group 6
[    3.566459] pci 0000:15:00.1: Adding to iommu group 6
[    3.566493] pci 0000:15:00.2: Adding to iommu group 6
[    3.566515] pci 0000:16:00.0: Adding to iommu group 6
[    3.566538] pci 0000:16:01.0: Adding to iommu group 6
[    3.566560] pci 0000:16:04.0: Adding to iommu group 6
[    3.566582] pci 0000:16:06.0: Adding to iommu group 6
[    3.566604] pci 0000:16:07.0: Adding to iommu group 6
[    3.566635] pci 0000:17:00.0: Adding to iommu group 6
[    3.566667] pci 0000:1e:00.0: Adding to iommu group 6
[    3.566721] pci 0000:20:00.0: Adding to iommu group 6
[    3.566998] pci 0000:38:00.0: Adding to iommu group 7
[    3.567088] pci 0000:38:00.0: Using iommu direct mapping
[    3.567180] pci 0000:38:00.1: Adding to iommu group 8
[    3.567220] pci 0000:38:00.2: Adding to iommu group 8
[    3.567269] pci 0000:38:00.3: Adding to iommu group 8
[    3.567309] pci 0000:38:00.4: Adding to iommu group 8
[    3.567349] pci 0000:38:00.6: Adding to iommu group 8
[    3.567379] pci 0000:39:00.0: Adding to iommu group 2
[    3.567613] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    3.567613] pci 0000:00:00.2: AMD-Vi: Extended features (0x4f77ef22294ada):
[    3.567614]  PPR NX GT IA GA PC GA_vAPIC
[    3.567616] AMD-Vi: Interrupt remapping enabled
[    3.567616] AMD-Vi: Virtual APIC enabled
[    3.574545] AMD-Vi: Lazy IO/TLB flushing enabled
[    3.575355] amd_uncore: AMD NB counters detected
[    3.575358] amd_uncore: AMD LLC counters detected
[    3.575727] check: Scanning for low memory corruption every 60 seconds
[    3.576235] Initialise system trusted keyrings
[    3.576344] Key type blacklist registered
[    3.576472] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    3.578016] zbud: loaded
[    3.582556] Key type asymmetric registered
[    3.582557] Asymmetric key parser 'x509' registered
[    3.582562] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    3.582751] io scheduler mq-deadline registered
[    3.582752] io scheduler kyber registered
[    3.582802] io scheduler bfq registered
[    3.583163] pcieport 0000:00:01.2: PME: Signaling with IRQ 26
[    3.583212] pcieport 0000:00:01.2: PME: Spurious native interrupt!
[    3.583266] pcieport 0000:00:01.2: AER: enabled with IRQ 26
[    3.583437] pcieport 0000:00:08.1: PME: Signaling with IRQ 27
[    3.583639] pcieport 0000:00:08.2: PME: Signaling with IRQ 28
[    3.584630] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.584756] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    3.584777] ACPI: Power Button [PWRB]
[    3.584810] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    3.586785] ACPI: Power Button [PWRF]
[    3.586949] Monitor-Mwait will be used to enter C-1 state
[    3.588569] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.609617] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.610340] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    3.611363] usbcore: registered new interface driver usbserial_generic
[    3.611366] usbserial: USB Serial support registered for generic
[    3.611391] rtc_cmos 00:02: RTC can wake from S4
[    3.611602] rtc_cmos 00:02: registered as rtc0
[    3.611618] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    3.611746] ledtrig-cpu: registered to indicate activity on CPUs
[    3.611787] drop_monitor: Initializing network drop monitor service
[    3.612097] NET: Registered protocol family 10
[    3.617810] Segment Routing with IPv6
[    3.617844] NET: Registered protocol family 17
[    3.618593] RAS: Correctable Errors collector initialized.
[    3.618629] microcode: CPU0: patch_level=0x0810100b
[    3.618641] microcode: CPU1: patch_level=0x0810100b
[    3.618653] microcode: CPU2: patch_level=0x0810100b
[    3.618659] microcode: CPU3: patch_level=0x0810100b
[    3.618678] microcode: CPU4: patch_level=0x0810100b
[    3.618686] microcode: CPU5: patch_level=0x0810100b
[    3.618690] microcode: CPU6: patch_level=0x0810100b
[    3.618697] microcode: CPU7: patch_level=0x0810100b
[    3.618744] microcode: Microcode Update Driver: v2.2.
[    3.618748] IPI shorthand broadcast: enabled
[    3.618768] sched_clock: Marking stable (3642068817, -23328643)->(3641888214, -23148040)
[    3.618862] registered taskstats version 1
[    3.618869] Loading compiled-in X.509 certificates
[    3.622191] Loaded X.509 cert 'Build time autogenerated kernel key: 3cf0b654b73931380a3e0a87e03f0eddf6fd487a'
[    3.622250] zswap: loaded using pool lzo/zbud
[    3.622417] Key type ._fscrypt registered
[    3.622418] Key type .fscrypt registered
[    3.627774] Key type big_key registered
[    3.628391] PM:   Magic number: 0:792:449
[    3.628521] rtc_cmos 00:02: setting system clock to 2020-04-16T21:26:03 UTC (1587072363)
[    3.629580] Freeing unused decrypted memory: 2040K
[    3.629814] Freeing unused kernel image memory: 1660K
[    3.653737] Write protecting the kernel read-only data: 18432k
[    3.655035] Freeing unused kernel image memory: 2012K
[    3.655143] Freeing unused kernel image memory: 60K
[    3.664936] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.664937] Run /init as init process
[    3.762658] SCSI subsystem initialized
[    3.765290] cryptd: max_cpu_qlen set to 1000
[    3.765456] xhci_hcd 0000:15:00.0: xHCI Host Controller
[    3.765462] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 1
[    3.770033] AVX2 version of gcm_enc/dec engaged.
[    3.770034] AES CTR mode by8 optimization enabled
[    3.771648] libata version 3.00 loaded.
[    3.774828] ahci 0000:15:00.1: version 3.0
[    3.775015] ahci 0000:15:00.1: SSS flag set, parallel bus scan disabled
[    3.775062] ahci 0000:15:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[    3.775064] ahci 0000:15:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    3.775445] libphy: r8169: probed
[    3.775715] r8169 0000:1e:00.0 eth0: RTL8168h/8111h, 30:9c:23:83:ff:04, XID 541, IRQ 39
[    3.775717] r8169 0000:1e:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.777015] scsi host0: ahci
[    3.777343] scsi host1: ahci
[    3.777627] scsi host2: ahci
[    3.777846] scsi host3: ahci
[    3.778020] scsi host4: ahci
[    3.783365] scsi host5: ahci
[    3.783642] scsi host6: ahci
[    3.786699] scsi host7: ahci
[    3.786821] ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 40
[    3.786824] ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 40
[    3.786825] ata3: DUMMY
[    3.786825] ata4: DUMMY
[    3.786835] ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 40
[    3.786838] ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 40
[    3.786838] ata7: DUMMY
[    3.786839] ata8: DUMMY
[    3.787388] ahci 0000:39:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    3.787390] ahci 0000:39:00.0: flags: 64bit ncq sntf ilck led clo only pmp fbs pio 
[    3.787889] scsi host8: ahci
[    3.788011] ata9: SATA max UDMA/133 abar m2048@0xfe900000 port 0xfe900100 irq 42
[    3.820814] xhci_hcd 0000:15:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000048000410
[    3.821010] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    3.821011] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.821012] usb usb1: Product: xHCI Host Controller
[    3.821013] usb usb1: Manufacturer: Linux 5.4.15-arch1-1 xhci-hcd
[    3.821014] usb usb1: SerialNumber: 0000:15:00.0
[    3.821133] hub 1-0:1.0: USB hub found
[    3.821147] hub 1-0:1.0: 10 ports detected
[    3.821515] xhci_hcd 0000:15:00.0: xHCI Host Controller
[    3.821517] xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 2
[    3.821529] xhci_hcd 0000:15:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    3.821556] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.821570] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    3.821571] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.821571] usb usb2: Product: xHCI Host Controller
[    3.821572] usb usb2: Manufacturer: Linux 5.4.15-arch1-1 xhci-hcd
[    3.821573] usb usb2: SerialNumber: 0000:15:00.0
[    3.821681] hub 2-0:1.0: USB hub found
[    3.821689] hub 2-0:1.0: 4 ports detected
[    3.821991] xhci_hcd 0000:38:00.3: xHCI Host Controller
[    3.821993] xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 3
[    3.822185] xhci_hcd 0000:38:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410
[    3.822830] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    3.822830] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.822831] usb usb3: Product: xHCI Host Controller
[    3.822832] usb usb3: Manufacturer: Linux 5.4.15-arch1-1 xhci-hcd
[    3.822832] usb usb3: SerialNumber: 0000:38:00.3
[    3.822918] hub 3-0:1.0: USB hub found
[    3.822931] hub 3-0:1.0: 4 ports detected
[    3.823302] xhci_hcd 0000:38:00.3: xHCI Host Controller
[    3.823304] xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 4
[    3.823305] xhci_hcd 0000:38:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    3.823330] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.823350] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    3.823351] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.823352] usb usb4: Product: xHCI Host Controller
[    3.823353] usb usb4: Manufacturer: Linux 5.4.15-arch1-1 xhci-hcd
[    3.823353] usb usb4: SerialNumber: 0000:38:00.3
[    3.823450] hub 4-0:1.0: USB hub found
[    3.823463] hub 4-0:1.0: 4 ports detected
[    3.823896] xhci_hcd 0000:38:00.4: xHCI Host Controller
[    3.823898] xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 5
[    3.824056] xhci_hcd 0000:38:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410
[    3.824621] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    3.824622] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.824623] usb usb5: Product: xHCI Host Controller
[    3.824623] usb usb5: Manufacturer: Linux 5.4.15-arch1-1 xhci-hcd
[    3.824624] usb usb5: SerialNumber: 0000:38:00.4
[    3.824704] hub 5-0:1.0: USB hub found
[    3.824709] hub 5-0:1.0: 1 port detected
[    3.824821] xhci_hcd 0000:38:00.4: xHCI Host Controller
[    3.824823] xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 6
[    3.824824] xhci_hcd 0000:38:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[    3.824860] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.824874] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    3.824875] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.824875] usb usb6: Product: xHCI Host Controller
[    3.824876] usb usb6: Manufacturer: Linux 5.4.15-arch1-1 xhci-hcd
[    3.824876] usb usb6: SerialNumber: 0000:38:00.4
[    3.824966] hub 6-0:1.0: USB hub found
[    3.824975] hub 6-0:1.0: 1 port detected
[    4.099723] ata1: SATA link down (SStatus 0 SControl 300)
[    4.111836] ata9: SATA link down (SStatus 0 SControl 300)
[    4.217013] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    4.261425] usb 1-3: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00
[    4.261428] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.261431] usb 1-3: Product: USB DISK
[    4.261433] usb 1-3: Manufacturer: SMI Corporation
[    4.294866] usb-storage 1-3:1.0: USB Mass Storage device detected
[    4.295060] scsi host9: usb-storage 1-3:1.0
[    4.295146] usbcore: registered new interface driver usb-storage
[    4.296435] usbcore: registered new interface driver uas
[    4.410777] ata2: SATA link down (SStatus 0 SControl 300)
[    4.457014] usb 1-8: new high-speed USB device number 3 using xhci_hcd
[    4.497467] usb 1-8: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32
[    4.497472] usb 1-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    4.497474] usb 1-8: Product: USB2.0 Hub
[    4.503438] hub 1-8:1.0: USB hub found
[    4.507432] hub 1-8:1.0: 4 ports detected
[    4.587181] tsc: Refined TSC clocksource calibration: 3599.976 MHz
[    4.587194] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e43ca19a9, max_idle_ns: 440795315102 ns
[    4.587244] clocksource: Switched to clocksource tsc
[    4.717012] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[    4.880358] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.882108] ata5.00: ATAPI: HL-DT-ST DVDRAM GH24NSD1, LG00, max UDMA/133
[    4.883432] ata5.00: configured for UDMA/133
[    4.885492] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NSD1  LG00 PQ: 0 ANSI: 5
[    5.090347] usb 1-8.1: new full-speed USB device number 5 using xhci_hcd
[    5.106563] usb 1-10: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.10
[    5.106567] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.403696] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.403876] ata6.00: ATA-10: SATAFIRM   S11, SBFK71W1, max UDMA/133
[    5.403879] ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    5.404020] ata6.00: configured for UDMA/133
[    5.404083] scsi: waiting for bus probes to complete ...
[    5.445724] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[    5.445728] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.445731] usb 1-8.1: Product: Gaming Mouse
[    5.445733] usb 1-8.1: Manufacturer: PixArt
[    5.458182] hidraw: raw HID events driver (C) Jiri Kosina
[    5.503053] usbcore: registered new interface driver usbhid
[    5.503055] usbhid: USB HID core driver
[    5.505471] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0001/input/input2
[    5.505529] hid-generic 0003:093A:2530.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[    5.530949] scsi 9:0:0:0: Direct-Access     SMI      USB DISK         1100 PQ: 0 ANSI: 0 CCS
[    5.531565] scsi 5:0:0:0: Direct-Access     ATA      SATAFIRM   S11   71W1 PQ: 0 ANSI: 5
[    5.534117] sd 5:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    5.534126] sd 5:0:0:0: [sda] Write Protect is off
[    5.534128] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.534140] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.534314] sd 9:0:0:0: [sdb] 7864320 512-byte logical blocks: (4.03 GB/3.75 GiB)
[    5.534842] sd 9:0:0:0: [sdb] Write Protect is off
[    5.534843] sd 9:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    5.535374] sd 9:0:0:0: [sdb] No Caching mode page found
[    5.535545] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[    5.546698] usb 1-8.2: new low-speed USB device number 6 using xhci_hcd
[    5.553001]  sdb: sdb1 sdb2
[    5.555167] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[    5.559331]  sda: sda1 sda2 sda3 sda4
[    5.559830] sd 5:0:0:0: [sda] Attached SCSI disk
[    5.568146] random: fast init done
[    5.579663] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.579666] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.600430] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    5.796431] usb 1-8.2: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10
[    5.796433] usb 1-8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.796434] usb 1-8.2: Product: USB Keyboard
[    5.796435] usb 1-8.2: Manufacturer: SEM
[    5.831853] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.2/1-8.2:1.0/0003:1A2C:2124.0002/input/input3
[    5.887084] hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:15:00.0-8.2/input0
[    5.909221] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.2/1-8.2:1.1/0003:1A2C:2124.0003/input/input4
[    5.963478] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.2/1-8.2:1.1/0003:1A2C:2124.0003/input/input5
[    5.963750] hid-generic 0003:1A2C:2124.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:15:00.0-8.2/input1
[    6.290371] ISO 9660 Extensions: RRIP_1991A
[    6.547729] loop: module loaded
[    6.668585] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    7.595932] systemd[1]: systemd 244.1-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    7.610056] systemd[1]: Detected architecture x86-64.
[    7.653441] systemd[1]: Set hostname to <archiso>.
[    7.654411] systemd[1]: Initializing machine ID from random generator.
[    7.971306] systemd[1]: Created slice system-getty.slice.
[    7.972174] systemd[1]: Created slice User and Session Slice.
[    7.972861] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.973572] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.974436] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.975117] systemd[1]: Reached target Local Encrypted Volumes.
[    7.975803] systemd[1]: Reached target Paths.
[    7.976441] systemd[1]: Reached target Remote File Systems.
[    7.977095] systemd[1]: Reached target Slices.
[    7.977734] systemd[1]: Reached target Swap.
[    7.978406] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    7.980179] systemd[1]: Listening on LVM2 metadata daemon socket.
[    7.980973] systemd[1]: Listening on LVM2 poll daemon socket.
[    7.983584] systemd[1]: Listening on Process Core Dump Socket.
[    7.984274] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    7.985015] systemd[1]: Listening on Journal Audit Socket.
[    7.985712] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.986416] systemd[1]: Listening on Journal Socket.
[    7.987152] systemd[1]: Listening on udev Control Socket.
[    7.987834] systemd[1]: Listening on udev Kernel Socket.
[    7.989101] systemd[1]: Mounting Huge Pages File System...
[    7.990413] systemd[1]: Mounting POSIX Message Queue File System...
[    7.991652] systemd[1]: Mounting Kernel Debug File System...
[    7.993216] systemd[1]: Mounting Temporary Directory (/tmp)...
[    7.994862] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    7.996190] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    8.024178] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    8.026515] systemd[1]: Starting Load Kernel Modules...
[    8.027783] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.029308] systemd[1]: Starting udev Coldplug all Devices...
[    8.030711] systemd[1]: Mounted Huge Pages File System.
[    8.031591] systemd[1]: Mounted POSIX Message Queue File System.
[    8.032286] systemd[1]: Mounted Kernel Debug File System.
[    8.032979] systemd[1]: Mounted Temporary Directory (/tmp).
[    8.033942] systemd[1]: Started Create list of static device nodes for the current kernel.
[    8.050450] systemd[1]: Started Remount Root and Kernel File Systems.
[    8.051191] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    8.069304] Asymmetric key parser 'pkcs8' registered
[    8.076075] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    8.076929] systemd[1]: Starting Load/Save Random Seed...
[    8.078273] systemd[1]: Starting Create System Users...
[    8.079365] systemd[1]: Started Load Kernel Modules.
[    8.080321] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[    8.081153] systemd[1]: Mounting Kernel Configuration File System...
[    8.082483] systemd[1]: Starting Apply Kernel Variables...
[    8.084477] systemd[1]: Mounted Kernel Configuration File System.
[    8.127024] systemd[1]: Started Create System Users.
[    8.128750] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.129650] systemd[1]: Started Apply Kernel Variables.
[    8.160605] systemd[1]: Started Create Static Device Nodes in /dev.
[    8.162401] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[    8.164780] systemd[1]: Starting Journal Service...
[    8.166943] systemd[1]: Starting udev Kernel Device Manager...
[    8.167923] systemd[1]: Started udev Coldplug all Devices.
[    8.178645] random: lvm: uninitialized urandom read (4 bytes read)
[    8.180890] systemd[1]: Started LVM2 metadata daemon.
[    8.350223] random: crng init done
[    8.351354] systemd[1]: Started Load/Save Random Seed.
[    8.398341] systemd[1]: Started Journal Service.
[    8.399171] audit: type=1130 audit(1587072368.265:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.402462] audit: type=1130 audit(1587072368.268:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.435618] systemd-journald[403]: Received client request to flush runtime journal.
[    8.437309] audit: type=1130 audit(1587072368.305:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.495690] acpi_cpufreq: overriding BIOS provided _PSD data
[    8.599846] parport_pc 00:04: reported by Plug and Play ACPI
[    8.599945] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    8.688085] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    8.688090] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    8.737084] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    8.737236] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    8.737253] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    8.808956] r8169 0000:1e:00.0 enp30s0: renamed from eth0
[    8.924139] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    9.039223] Linux agpgart interface v0.103
[    9.048057] mousedev: PS/2 mouse device common for all mice
[    9.048633] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    9.054873] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.212021] Intel(R) Wireless WiFi driver for Linux
[    9.212023] Copyright(c) 2003- 2015 Intel Corporation
[    9.221537] Bluetooth: Core ver 2.22
[    9.221556] NET: Registered protocol family 31
[    9.221557] Bluetooth: HCI device and connection manager initialized
[    9.221561] Bluetooth: HCI socket layer initialized
[    9.221563] Bluetooth: L2CAP socket layer initialized
[    9.221566] Bluetooth: SCO socket layer initialized
[    9.286027] ppdev: user-space parallel port driver
[    9.291698] snd_hda_intel 0000:38:00.1: Handle vga_switcheroo audio client
[    9.391295] usbcore: registered new interface driver btusb
[    9.396144] Bluetooth: hci0: Firmware revision 0.1 build 50 week 12 2019
[    9.400850] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input7
[    9.400908] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input8
[    9.400973] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input9
[    9.401024] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input10
[    9.401081] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input11
[    9.401137] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input12
[    9.449602] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    9.449607] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.449610] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.449613] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    9.449615] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    9.449618] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    9.449621] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    9.449624] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    9.456919] kvm: disabled by bios
[    9.500985] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input13
[    9.501091] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input14
[    9.501199] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input15
[    9.501309] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input16
[    9.501368] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input17
[    9.501511] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input18
[    9.501604] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input19
[    9.501698] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input20
[    9.517908] audit: type=1130 audit(1587072369.385:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.522429] kvm: disabled by bios
[    9.587451] MCE: In-kernel MCE decoding enabled.
[    9.589332] kvm: disabled by bios
[    9.593597] EDAC amd64: Node 0: DRAM ECC disabled.
[    9.593600] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    9.668269] EDAC amd64: Node 0: DRAM ECC disabled.
[    9.668273] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    9.670127] kvm: disabled by bios
[    9.679971] iwlwifi 0000:20:00.0: Found debug destination: EXTERNAL_DRAM
[    9.679976] iwlwifi 0000:20:00.0: Found debug configuration: 0
[    9.680990] iwlwifi 0000:20:00.0: loaded firmware version 36.952d9faa.0 op_mode iwlmvm
[    9.725920] audit: type=1130 audit(1587072369.592:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.736269] EDAC amd64: Node 0: DRAM ECC disabled.
[    9.736271] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    9.738740] kvm: disabled by bios
[    9.741511] wl: loading out-of-tree module taints kernel.
[    9.741514] wl: module license 'MIXED/Proprietary' taints kernel.
[    9.741515] Disabling lock debugging due to kernel taint
[    9.744163] wl: module verification failed: signature and/or required key missing - tainting kernel
[    9.807293] audit: type=1130 audit(1587072369.675:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.811419] kvm: disabled by bios
[    9.811858] EDAC amd64: Node 0: DRAM ECC disabled.
[    9.811859] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    9.819802] audit: type=1127 audit(1587072369.685:8): pid=477 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[    9.825193] audit: type=1130 audit(1587072369.692:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.857396] audit: type=1130 audit(1587072369.725:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.880977] EDAC amd64: Node 0: DRAM ECC disabled.
[    9.880979] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    9.883182] kvm: disabled by bios
[    9.885122] iwlwifi 0000:20:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[    9.892358] iwlwifi 0000:20:00.0: Applying debug destination EXTERNAL_DRAM
[    9.892794] iwlwifi 0000:20:00.0: Allocated 0x00400000 bytes for firmware monitor.
[    9.942548] iwlwifi 0000:20:00.0: base HW address: 74:e5:f9:bf:98:cf
[    9.951990] kvm: disabled by bios
[    9.952047] EDAC amd64: Node 0: DRAM ECC disabled.
[    9.952229] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.013710] [drm] amdgpu kernel modesetting enabled.
[   10.013839] Parsing CRAT table with 1 nodes
[   10.013843] Creating topology SYSFS entries
[   10.013895] Topology: Add APU node [0x0:0x0]
[   10.013895] Finished initializing topology
[   10.013984] amdgpu 0000:38:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[   10.013986] amdgpu 0000:38:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
[   10.013988] amdgpu 0000:38:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfe500000 -> 0xfe57ffff
[   10.013990] amdgpu 0000:38:00.0: vgaarb: deactivate vga console
[   10.015098] Console: switching to colour dummy device 80x25
[   10.015350] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1462:0x7A34 0xC6).
[   10.015367] [drm] register mmio base: 0xFE500000
[   10.015367] [drm] register mmio size: 524288
[   10.015397] [drm] add ip block number 0 <soc15_common>
[   10.015397] [drm] add ip block number 1 <gmc_v9_0>
[   10.015398] [drm] add ip block number 2 <vega10_ih>
[   10.015399] [drm] add ip block number 3 <psp>
[   10.015399] [drm] add ip block number 4 <gfx_v9_0>
[   10.015400] [drm] add ip block number 5 <sdma_v4_0>
[   10.015401] [drm] add ip block number 6 <powerplay>
[   10.015402] [drm] add ip block number 7 <dm>
[   10.015403] [drm] add ip block number 8 <vcn_v1_0>
[   10.017232] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   10.017717] thermal thermal_zone0: failed to read out thermal zone (-61)
[   10.041093] EDAC amd64: Node 0: DRAM ECC disabled.
[   10.041097] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.047234] [drm] BIOS signature incorrect 50 7
[   10.047283] ATOM BIOS: 113-RAVEN-106
[   10.053475] [drm] VCN decode is enabled in VM mode
[   10.053476] [drm] VCN encode is enabled in VM mode
[   10.053476] [drm] VCN jpeg decode is enabled in VM mode
[   10.053517] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[   10.053525] amdgpu 0000:38:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[   10.053526] amdgpu 0000:38:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[   10.053527] amdgpu 0000:38:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[   10.053530] [drm] Detected VRAM RAM=2048M, BAR=2048M
[   10.053530] [drm] RAM width 128bits DDR4
[   10.053604] [TTM] Zone  kernel: Available graphics memory: 7173382 KiB
[   10.053604] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[   10.053605] [TTM] Initializing pool allocator
[   10.053607] [TTM] Initializing DMA pool allocator
[   10.053668] [drm] amdgpu: 2048M of VRAM memory ready
[   10.053670] [drm] amdgpu: 3072M of GTT memory ready.
[   10.053679] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   10.053810] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[   10.079749] [drm] Warning: check cp_fw_version and update it to realize 			      GRBM requires 1-cycle delay in cp firmware
[   10.081219] [drm] use_doorbell being set to: [true]
[   10.081282] amdgpu: [powerplay] hwmgr_sw_init smu backed is smu10_smu
[   10.081677] EDAC amd64: Node 0: DRAM ECC disabled.
[   10.081679] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   10.102627] [drm] Found VCN firmware Version: 1.73 Family ID: 18
[   10.102636] [drm] PSP loading VCN firmware
[   10.123569] [drm] reserve 0x400000 from 0xf47f800000 for PSP TMR
[   10.285803] [drm] DM_PPLIB: values for F clock
[   10.285805] [drm] DM_PPLIB:	 0 in kHz, 3649 in mV
[   10.285806] [drm] DM_PPLIB:	 0 in kHz, 3649 in mV
[   10.285807] [drm] DM_PPLIB:	 0 in kHz, 3649 in mV
[   10.285808] [drm] DM_PPLIB:	 1467000 in kHz, 4399 in mV
[   10.285825] ------------[ cut here ]------------
[   10.285992] WARNING: CPU: 5 PID: 416 at drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:1464 dcn_bw_update_from_pplib+0xaa/0x2f0 [amdgpu]
[   10.285993] Modules linked in: amdgpu(+) iwlmvm mac80211 wl(POE) libarc4 edac_mce_amd gpu_sched i2c_algo_bit snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi btusb ledtrig_audio ttm btrtl ccp rng_core snd_hda_intel btbcm snd_intel_nhlt ppdev btintel drm_kms_helper snd_hda_codec kvm bluetooth iwlwifi snd_hda_core drm joydev snd_hwdep irqbypass snd_pcm input_leds mousedev ecdh_generic crct10dif_pclmul agpgart cfg80211 snd_timer ecc ghash_clmulni_intel syscopyarea snd sysfillrect crc16 pcspkr wmi_bmof k10temp sysimgblt rfkill fb_sys_fops soundcore sp5100_tco i2c_piix4 evdev gpio_amdpt parport_pc parport mac_hid pinctrl_amd acpi_cpufreq pkcs8_key_parser ip_tables x_tables overlay squashfs loop isofs sr_mod cdrom sd_mod hid_generic usbhid hid uas usb_storage crc32_pclmul crc32c_intel ahci libahci aesni_intel glue_helper libata crypto_simd r8169 xhci_pci cryptd realtek xhci_hcd libphy scsi_mod wmi
[   10.286040] CPU: 5 PID: 416 Comm: systemd-udevd Tainted: P           OE     5.4.15-arch1-1 #1
[   10.286041] Hardware name: Micro-Star International Co., Ltd. MS-7A34/B350 PC MATE (MS-7A34), BIOS A.E0 05/02/2018
[   10.286196] RIP: 0010:dcn_bw_update_from_pplib+0xaa/0x2f0 [amdgpu]
[   10.286199] Code: 0c 24 85 c9 74 24 8d 71 ff 48 8d 44 24 04 48 8d 54 f4 0c eb 0d 48 83 c0 08 48 39 d0 0f 84 2e 01 00 00 44 8b 00 45 85 c0 75 eb <0f> 0b e8 df d9 1b d6 4c 89 e2 be 04 00 00 00 4c 89 ef e8 3f 5c fe
[   10.286200] RSP: 0018:ffffb80fc05a7630 EFLAGS: 00010246
[   10.286202] RAX: ffffb80fc05a7634 RBX: ffff93e6359a0000 RCX: 0000000000000004
[   10.286204] RDX: ffffb80fc05a7654 RSI: 0000000000000003 RDI: ffffffff98964db2
[   10.286205] RBP: ffffb80fc05a7778 R08: 0000000000000000 R09: 0000000000000004
[   10.286206] R10: 0000000000000000 R11: 0000000000000001 R12: ffffb80fc05a76c0
[   10.286206] R13: ffff93e6387ba900 R14: 0000000000000001 R15: 0000000000000000
[   10.286208] FS:  00007f3ea1c67840(0000) GS:ffff93e650d40000(0000) knlGS:0000000000000000
[   10.286210] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   10.286211] CR2: 00007f3507a00498 CR3: 00000003ffb5a000 CR4: 00000000003406e0
[   10.286212] Call Trace:
[   10.286372]  dcn10_create_resource_pool+0x835/0xb60 [amdgpu]
[   10.286379]  ? __kmalloc+0x196/0x270
[   10.286525]  dc_create_resource_pool+0xc3/0x130 [amdgpu]
[   10.286671]  dc_create+0x24d/0x760 [amdgpu]
[   10.286676]  ? kmem_cache_alloc_trace+0x17b/0x220
[   10.286815]  ? amdgpu_cgs_create_device+0x23/0x50 [amdgpu]
[   10.286964]  amdgpu_dm_init+0x149/0x1d0 [amdgpu]
[   10.287109]  ? psm_init_power_state_table+0x94/0x1c0 [amdgpu]
[   10.287256]  dm_hw_init+0xe/0x20 [amdgpu]
[   10.287409]  amdgpu_device_init.cold+0x14b2/0x17cb [amdgpu]
[   10.287526]  amdgpu_driver_load_kms+0x53/0x1a0 [amdgpu]
[   10.287545]  drm_dev_register+0x111/0x150 [drm]
[   10.287660]  amdgpu_pci_probe+0xee/0x150 [amdgpu]
[   10.287664]  ? __pm_runtime_resume+0x49/0x60
[   10.287668]  local_pci_probe+0x42/0x80
[   10.287670]  ? pci_match_device+0xd7/0x100
[   10.287672]  pci_device_probe+0x104/0x1a0
[   10.287676]  really_probe+0x147/0x3c0
[   10.287679]  driver_probe_device+0xb6/0x100
[   10.287682]  device_driver_attach+0x53/0x60
[   10.287685]  __driver_attach+0x8a/0x150
[   10.287687]  ? device_driver_attach+0x60/0x60
[   10.287689]  bus_for_each_dev+0x89/0xd0
[   10.287692]  bus_add_driver+0x14d/0x1f0
[   10.287695]  driver_register+0x6c/0xc0
[   10.287697]  ? 0xffffffffc0cc4000
[   10.287701]  do_one_initcall+0x59/0x234
[   10.287706]  do_init_module+0x5c/0x230
[   10.287709]  load_module+0x2729/0x29e0
[   10.287716]  ? __do_sys_init_module+0x169/0x190
[   10.287718]  __do_sys_init_module+0x169/0x190
[   10.287723]  do_syscall_64+0x4e/0x140
[   10.287727]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   10.287729] RIP: 0033:0x7f3ea2a16d2e
[   10.287732] Code: 48 8b 0d 55 01 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 22 01 0c 00 f7 d8 64 89 01 48
[   10.287733] RSP: 002b:00007ffdb10fd8d8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[   10.287735] RAX: ffffffffffffffda RBX: 00005582ec05f980 RCX: 00007f3ea2a16d2e
[   10.287736] RDX: 00007f3ea26dd84d RSI: 00000000008e4269 RDI: 00005582ecaa0200
[   10.287737] RBP: 00005582ecaa0200 R08: 00005582ebfff01a R09: 0000000000000006
[   10.287738] R10: 00005582ebfff010 R11: 0000000000000246 R12: 00007f3ea26dd84d
[   10.287739] R13: 0000000000000001 R14: 00005582ec131e00 R15: 00005582ec05f980
[   10.287743] ---[ end trace b5842fc98a81ffb5 ]---
[   10.287762] [drm] DM_PPLIB: values for DCF clock
[   10.287764] [drm] DM_PPLIB:	 300000 in kHz, 3649 in mV
[   10.287765] [drm] DM_PPLIB:	 600000 in kHz, 4074 in mV
[   10.287766] [drm] DM_PPLIB:	 626000 in kHz, 4250 in mV
[   10.287767] [drm] DM_PPLIB:	 654000 in kHz, 4399 in mV
[   10.293722] [drm] Display Core initialized with v3.2.48!
[   10.293915] snd_hda_intel 0000:38:00.1: bound 0000:38:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[   10.319441] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.319443] [drm] Driver supports precise vblank timestamp query.
[   10.334188] [drm] VCN decode and encode initialized successfully(under SPG Mode).
[   10.335805] kfd kfd: Allocated 3969056 bytes on gart
[   10.336854] Topology: Add APU node [0x15dd:0x1002]
[   10.336857] kfd kfd: added device 1002:15dd
[   10.338041] [drm] fb mappable at 0x60BC1000
[   10.338042] [drm] vram apper at 0x60000000
[   10.338043] [drm] size 8294400
[   10.338044] [drm] fb depth is 24
[   10.338044] [drm]    pitch is 7680
[   10.338135] fbcon: amdgpudrmfb (fb0) is primary device
[   10.364046] Console: switching to colour frame buffer device 240x67
[   10.386176] amdgpu 0000:38:00.0: fb0: amdgpudrmfb frame buffer device
[   10.426837] amdgpu 0000:38:00.0: ring gfx uses VM inv eng 0 on hub 0
[   10.426840] amdgpu 0000:38:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[   10.426842] amdgpu 0000:38:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[   10.426844] amdgpu 0000:38:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[   10.426846] amdgpu 0000:38:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[   10.426848] amdgpu 0000:38:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[   10.426850] amdgpu 0000:38:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[   10.426852] amdgpu 0000:38:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[   10.426853] amdgpu 0000:38:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[   10.426855] amdgpu 0000:38:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[   10.426857] amdgpu 0000:38:00.0: ring sdma0 uses VM inv eng 0 on hub 1
[   10.426859] amdgpu 0000:38:00.0: ring vcn_dec uses VM inv eng 1 on hub 1
[   10.426861] amdgpu 0000:38:00.0: ring vcn_enc0 uses VM inv eng 4 on hub 1
[   10.426863] amdgpu 0000:38:00.0: ring vcn_enc1 uses VM inv eng 5 on hub 1
[   10.426864] amdgpu 0000:38:00.0: ring vcn_jpeg uses VM inv eng 6 on hub 1
[   10.452583] [drm] Initialized amdgpu 3.35.0 20150101 for 0000:38:00.0 on minor 0
[   11.721102] audit: type=1130 audit(1587072371.588:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.884264] 8021q: 802.1Q VLAN Support v1.8
[   11.944931] Generic FE-GE Realtek PHY r8169-1e00:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-1e00:00, irq=IGNORE)
[   12.051191] r8169 0000:1e:00.0 enp30s0: Link is Down
[   15.026132] kauditd_printk_skb: 3 callbacks suppressed
[   15.026134] audit: type=1131 audit(1587072374.892:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.801760] audit: type=1130 audit(1587072378.668:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pacman-init comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   39.365665] usb 1-8.1: USB disconnect, device number 5
[   40.873681] usb 1-8.1: new full-speed USB device number 7 using xhci_hcd
[   41.226028] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[   41.226032] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   41.226035] usb 1-8.1: Product: Gaming Mouse
[   41.226037] usb 1-8.1: Manufacturer: PixArt
[   41.263480] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0004/input/input21
[   41.263681] hid-generic 0003:093A:2530.0004: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[   41.967743] audit: type=1130 audit(1587072401.835:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dhcpcd@enp30s0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   41.981233] audit: type=1130 audit(1587072401.848:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   41.983124] audit: type=1130 audit(1587072401.848:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   42.097527] audit: type=1101 audit(1587072401.965:20): pid=720 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="root" exe="/usr/bin/login" hostname=archiso addr=? terminal=tty1 res=success'
[   42.100405] audit: type=1103 audit(1587072401.968:21): pid=720 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_tally2,pam_shells,pam_unix,pam_permit,pam_env acct="root" exe="/usr/bin/login" hostname=archiso addr=? terminal=tty1 res=success'
[   42.100491] audit: type=1006 audit(1587072401.968:22): pid=720 uid=0 old-auid=4294967295 auid=0 tty=tty1 old-ses=4294967295 ses=1 res=1
[   42.132395] audit: type=1130 audit(1587072401.998:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   42.146582] audit: type=1101 audit(1587072402.012:24): pid=722 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="root" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   42.146614] audit: type=1006 audit(1587072402.012:25): pid=722 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2 res=1
[   42.147243] audit: type=1105 audit(1587072402.015:26): pid=722 uid=0 auid=0 ses=2 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="root" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   71.622833] usb 1-8.1: USB disconnect, device number 7
[   72.873681] usb 1-8.1: new full-speed USB device number 8 using xhci_hcd
[   73.226189] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[   73.226193] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   73.226196] usb 1-8.1: Product: Gaming Mouse
[   73.226198] usb 1-8.1: Manufacturer: PixArt
[   73.263613] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0005/input/input22
[   73.263813] hid-generic 0003:093A:2530.0005: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  103.367991] usb 1-8.1: USB disconnect, device number 8
[  104.877002] usb 1-8.1: new full-speed USB device number 9 using xhci_hcd
[  105.222359] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  105.222364] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  105.222366] usb 1-8.1: Product: Gaming Mouse
[  105.222368] usb 1-8.1: Manufacturer: PixArt
[  105.259478] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0006/input/input23
[  105.259646] hid-generic 0003:093A:2530.0006: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  135.369171] usb 1-8.1: USB disconnect, device number 9
[  136.876991] usb 1-8.1: new full-speed USB device number 10 using xhci_hcd
[  137.222539] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  137.222543] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  137.222546] usb 1-8.1: Product: Gaming Mouse
[  137.222548] usb 1-8.1: Manufacturer: PixArt
[  137.259658] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0007/input/input24
[  137.259831] hid-generic 0003:093A:2530.0007: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  167.626362] usb 1-8.1: USB disconnect, device number 10
[  169.140315] usb 1-8.1: new full-speed USB device number 11 using xhci_hcd
[  169.492718] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  169.492722] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  169.492725] usb 1-8.1: Product: Gaming Mouse
[  169.492727] usb 1-8.1: Manufacturer: PixArt
[  169.530143] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0008/input/input25
[  169.530364] hid-generic 0003:093A:2530.0008: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  199.883563] usb 1-8.1: USB disconnect, device number 11
[  201.140315] usb 1-8.1: new full-speed USB device number 12 using xhci_hcd
[  201.492916] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  201.492920] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  201.492923] usb 1-8.1: Product: Gaming Mouse
[  201.492925] usb 1-8.1: Manufacturer: PixArt
[  201.530343] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0009/input/input26
[  201.530779] hid-generic 0003:093A:2530.0009: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  231.884758] usb 1-8.1: USB disconnect, device number 12
[  233.136653] usb 1-8.1: new full-speed USB device number 13 using xhci_hcd
[  233.483113] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  233.483117] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  233.483120] usb 1-8.1: Product: Gaming Mouse
[  233.483122] usb 1-8.1: Manufacturer: PixArt
[  233.520520] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.000A/input/input27
[  233.520736] hid-generic 0003:093A:2530.000A: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  238.782921] kauditd_printk_skb: 3 callbacks suppressed
[  238.782925] audit: type=1104 audit(1587072598.652:30): pid=720 uid=0 auid=0 ses=1 msg='op=PAM:setcred grantors=pam_securetty,pam_tally2,pam_shells,pam_unix,pam_permit,pam_env acct="root" exe="/usr/bin/login" hostname=archiso addr=? terminal=tty1 res=success'
[  238.784046] audit: type=1106 audit(1587072598.652:31): pid=720 uid=0 auid=0 ses=1 msg='op=PAM:session_close grantors=pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="root" exe="/usr/bin/login" hostname=archiso addr=? terminal=tty1 res=success'
[  238.785418] audit: type=1131 audit(1587072598.652:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  238.806019] audit: type=1130 audit(1587072598.672:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  238.806026] audit: type=1131 audit(1587072598.672:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  238.808147] audit: type=1130 audit(1587072598.675:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  238.825680] audit: type=1101 audit(1587072598.692:36): pid=853 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tally2,pam_access,pam_unix,pam_permit,pam_time acct="root" exe="/usr/bin/login" hostname=archiso addr=? terminal=tty1 res=success'
[  238.825749] audit: type=1103 audit(1587072598.692:37): pid=853 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_tally2,pam_shells,pam_unix,pam_permit,pam_env acct="root" exe="/usr/bin/login" hostname=archiso addr=? terminal=tty1 res=success'
[  238.826150] audit: type=1006 audit(1587072598.692:38): pid=853 uid=0 old-auid=4294967295 auid=0 tty=tty1 old-ses=4294967295 ses=3 res=1
[  238.837545] audit: type=1105 audit(1587072598.705:39): pid=853 uid=0 auid=0 ses=3 msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="root" exe="/usr/bin/login" hostname=archiso addr=? terminal=tty1 res=success'
[  263.629964] usb 1-8.1: USB disconnect, device number 13
[  265.136957] usb 1-8.1: new full-speed USB device number 14 using xhci_hcd
[  265.486388] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  265.486392] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  265.486395] usb 1-8.1: Product: Gaming Mouse
[  265.486397] usb 1-8.1: Manufacturer: PixArt
[  265.523451] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.000B/input/input28
[  265.523697] hid-generic 0003:093A:2530.000B: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  295.631159] usb 1-8.1: USB disconnect, device number 14
[  297.136953] usb 1-8.1: new full-speed USB device number 15 using xhci_hcd
[  297.482524] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  297.482529] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  297.482532] usb 1-8.1: Product: Gaming Mouse
[  297.482534] usb 1-8.1: Manufacturer: PixArt
[  297.519974] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.000C/input/input29
[  297.520471] hid-generic 0003:093A:2530.000C: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  327.632371] usb 1-8.1: USB disconnect, device number 15
[  329.140287] usb 1-8.1: new full-speed USB device number 16 using xhci_hcd
[  329.485738] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  329.485743] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  329.485746] usb 1-8.1: Product: Gaming Mouse
[  329.485748] usb 1-8.1: Manufacturer: PixArt
[  329.523149] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.000D/input/input30
[  329.523353] hid-generic 0003:093A:2530.000D: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  343.573619] usb 1-4: new high-speed USB device number 17 using xhci_hcd
[  343.614016] usb 1-4: New USB device found, idVendor=1307, idProduct=0165, bcdDevice= 1.00
[  343.614020] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  343.614023] usb 1-4: Product: USB Mass Storage Device
[  343.614025] usb 1-4: Manufacturer: USBest Technology
[  343.614027] usb 1-4: SerialNumber: 00000000002000
[  343.623040] usb-storage 1-4:1.0: USB Mass Storage device detected
[  343.623864] scsi host10: usb-storage 1-4:1.0
[  344.644023] scsi 10:0:0:0: Direct-Access     Ut165    USB2FlashStorage 0.00 PQ: 0 ANSI: 2
[  344.644844] sd 10:0:0:0: [sdc] 7897088 512-byte logical blocks: (4.04 GB/3.77 GiB)
[  344.645201] sd 10:0:0:0: [sdc] Write Protect is off
[  344.645203] sd 10:0:0:0: [sdc] Mode Sense: 00 00 00 00
[  344.645576] sd 10:0:0:0: [sdc] Asking for cache data failed
[  344.647987] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[  344.847618]  sdc:
[  345.048876] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[  359.633588] usb 1-8.1: USB disconnect, device number 16
[  361.143609] usb 1-8.1: new full-speed USB device number 18 using xhci_hcd
[  361.488956] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  361.488961] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  361.488963] usb 1-8.1: Product: Gaming Mouse
[  361.488965] usb 1-8.1: Manufacturer: PixArt
[  361.526357] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.000E/input/input31
[  361.526530] hid-generic 0003:093A:2530.000E: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  386.944475] kauditd_printk_skb: 1 callbacks suppressed
[  386.944477] audit: type=1101 audit(1587072746.812:41): pid=922 uid=0 auid=0 ses=3 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="root" exe="/usr/bin/sudo" hostname=archiso addr=? terminal=/dev/tty1 res=success'
[  386.944733] audit: type=1110 audit(1587072746.812:42): pid=922 uid=0 auid=0 ses=3 msg='op=PAM:setcred grantors=pam_unix,pam_permit,pam_env acct="root" exe="/usr/bin/sudo" hostname=archiso addr=? terminal=/dev/tty1 res=success'
[  386.944738] audit: type=1105 audit(1587072746.812:43): pid=922 uid=0 auid=0 ses=3 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=archiso addr=? terminal=/dev/tty1 res=success'
[  387.081917] FAT-fs (sdc): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  387.082394] audit: type=1106 audit(1587072746.948:44): pid=922 uid=0 auid=0 ses=3 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=archiso addr=? terminal=/dev/tty1 res=success'
[  387.082468] audit: type=1104 audit(1587072746.948:45): pid=922 uid=0 auid=0 ses=3 msg='op=PAM:setcred grantors=pam_unix,pam_permit,pam_env acct="root" exe="/usr/bin/sudo" hostname=archiso addr=? terminal=/dev/tty1 res=success'
[  391.378800] usb 1-8.1: USB disconnect, device number 18
[  392.883594] usb 1-8.1: new full-speed USB device number 19 using xhci_hcd
[  393.229174] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  393.229178] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  393.229181] usb 1-8.1: Product: Gaming Mouse
[  393.229183] usb 1-8.1: Manufacturer: PixArt
[  393.266579] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.000F/input/input32
[  393.266787] hid-generic 0003:093A:2530.000F: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  423.380028] usb 1-8.1: USB disconnect, device number 19
[  424.886930] usb 1-8.1: new full-speed USB device number 20 using xhci_hcd
[  425.236387] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  425.236392] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  425.236395] usb 1-8.1: Product: Gaming Mouse
[  425.236397] usb 1-8.1: Manufacturer: PixArt
[  425.273784] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0010/input/input33
[  425.273974] hid-generic 0003:093A:2530.0010: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  455.125242] usb 1-8.1: USB disconnect, device number 20
[  456.630273] usb 1-8.1: new full-speed USB device number 21 using xhci_hcd
[  456.982295] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  456.982299] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  456.982302] usb 1-8.1: Product: Gaming Mouse
[  456.982304] usb 1-8.1: Manufacturer: PixArt
[  457.019180] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0011/input/input34
[  457.019351] hid-generic 0003:093A:2530.0011: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  487.126471] usb 1-8.1: USB disconnect, device number 21
[  488.640242] usb 1-8.1: new full-speed USB device number 22 using xhci_hcd
[  488.985565] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  488.985569] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  488.985572] usb 1-8.1: Product: Gaming Mouse
[  488.985574] usb 1-8.1: Manufacturer: PixArt
[  489.023252] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0012/input/input35
[  489.023458] hid-generic 0003:093A:2530.0012: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  519.127704] usb 1-8.1: USB disconnect, device number 22
[  520.633565] usb 1-8.1: new full-speed USB device number 23 using xhci_hcd
[  520.986066] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  520.986070] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  520.986073] usb 1-8.1: Product: Gaming Mouse
[  520.986075] usb 1-8.1: Manufacturer: PixArt
[  521.023492] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0013/input/input36
[  521.023694] hid-generic 0003:093A:2530.0013: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  551.128939] usb 1-8.1: USB disconnect, device number 23
[  552.636892] usb 1-8.1: new full-speed USB device number 24 using xhci_hcd
[  552.982009] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  552.982013] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  552.982016] usb 1-8.1: Product: Gaming Mouse
[  552.982018] usb 1-8.1: Manufacturer: PixArt
[  553.019706] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0014/input/input37
[  553.019899] hid-generic 0003:093A:2530.0014: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  583.386189] usb 1-8.1: USB disconnect, device number 24
[  584.640227] usb 1-8.1: new full-speed USB device number 25 using xhci_hcd
[  584.985537] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  584.985541] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  584.985544] usb 1-8.1: Product: Gaming Mouse
[  584.985546] usb 1-8.1: Manufacturer: PixArt
[  585.023060] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0015/input/input38
[  585.023441] hid-generic 0003:093A:2530.0015: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  615.387423] usb 1-8.1: USB disconnect, device number 25
[  616.640218] usb 1-8.1: new full-speed USB device number 26 using xhci_hcd
[  616.992787] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  616.992792] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  616.992795] usb 1-8.1: Product: Gaming Mouse
[  616.992797] usb 1-8.1: Manufacturer: PixArt
[  617.030011] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0016/input/input39
[  617.030512] hid-generic 0003:093A:2530.0016: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  647.388663] usb 1-8.1: USB disconnect, device number 26
[  648.893540] usb 1-8.1: new full-speed USB device number 27 using xhci_hcd
[  649.239028] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  649.239032] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  649.239035] usb 1-8.1: Product: Gaming Mouse
[  649.239037] usb 1-8.1: Manufacturer: PixArt
[  649.276518] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0017/input/input40
[  649.276801] hid-generic 0003:093A:2530.0017: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  679.389906] usb 1-8.1: USB disconnect, device number 27
[  680.896863] usb 1-8.1: new full-speed USB device number 28 using xhci_hcd
[  681.249274] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  681.249278] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  681.249281] usb 1-8.1: Product: Gaming Mouse
[  681.249283] usb 1-8.1: Manufacturer: PixArt
[  681.286499] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0018/input/input41
[  681.287087] hid-generic 0003:093A:2530.0018: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  711.647154] usb 1-8.1: USB disconnect, device number 28
[  712.903524] usb 1-8.1: new full-speed USB device number 29 using xhci_hcd
[  713.255516] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  713.255520] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  713.255523] usb 1-8.1: Product: Gaming Mouse
[  713.255525] usb 1-8.1: Manufacturer: PixArt
[  713.292921] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0019/input/input42
[  713.293656] hid-generic 0003:093A:2530.0019: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  743.648396] usb 1-8.1: USB disconnect, device number 29
[  744.900186] usb 1-8.1: new full-speed USB device number 30 using xhci_hcd
[  745.245893] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  745.245898] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  745.245901] usb 1-8.1: Product: Gaming Mouse
[  745.245903] usb 1-8.1: Manufacturer: PixArt
[  745.283146] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.001A/input/input43
[  745.283934] hid-generic 0003:093A:2530.001A: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  775.393622] usb 1-8.1: USB disconnect, device number 30
[  776.903507] usb 1-8.1: new full-speed USB device number 31 using xhci_hcd
[  777.249003] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  777.249007] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  777.249010] usb 1-8.1: Product: Gaming Mouse
[  777.249012] usb 1-8.1: Manufacturer: PixArt
[  777.286395] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.001B/input/input44
[  777.286629] hid-generic 0003:093A:2530.001B: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  807.394872] usb 1-8.1: USB disconnect, device number 31
[  808.906841] usb 1-8.1: new full-speed USB device number 32 using xhci_hcd
[  809.259239] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  809.259244] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  809.259246] usb 1-8.1: Product: Gaming Mouse
[  809.259248] usb 1-8.1: Manufacturer: PixArt
[  809.296749] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.001C/input/input45
[  809.297226] hid-generic 0003:093A:2530.001C: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  839.396119] usb 1-8.1: USB disconnect, device number 32
[  840.910159] usb 1-8.1: new full-speed USB device number 33 using xhci_hcd
[  841.262593] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  841.262598] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  841.262601] usb 1-8.1: Product: Gaming Mouse
[  841.262603] usb 1-8.1: Manufacturer: PixArt
[  841.299711] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.001D/input/input46
[  841.300025] hid-generic 0003:093A:2530.001D: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  843.159299] usb 1-4: USB disconnect, device number 17
[  871.653373] usb 1-8.1: USB disconnect, device number 33
[  873.160153] usb 1-8.1: new full-speed USB device number 34 using xhci_hcd
[  873.505749] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  873.505753] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  873.505756] usb 1-8.1: Product: Gaming Mouse
[  873.505758] usb 1-8.1: Manufacturer: PixArt
[  873.543152] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.001E/input/input47
[  873.543375] hid-generic 0003:093A:2530.001E: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  903.654614] usb 1-8.1: USB disconnect, device number 34
[  903.669584] audit: type=1130 audit(1587073263.535:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  903.669592] audit: type=1131 audit(1587073263.535:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  905.163478] usb 1-8.1: new full-speed USB device number 35 using xhci_hcd
[  905.515982] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  905.515987] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  905.515989] usb 1-8.1: Product: Gaming Mouse
[  905.515991] usb 1-8.1: Manufacturer: PixArt
[  905.553396] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.001F/input/input48
[  905.553835] hid-generic 0003:093A:2530.001F: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  935.911869] usb 1-8.1: USB disconnect, device number 35
[  937.166803] usb 1-8.1: new full-speed USB device number 36 using xhci_hcd
[  937.519294] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  937.519299] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  937.519301] usb 1-8.1: Product: Gaming Mouse
[  937.519303] usb 1-8.1: Manufacturer: PixArt
[  937.556638] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0020/input/input49
[  937.557315] hid-generic 0003:093A:2530.0020: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  967.657103] usb 1-8.1: USB disconnect, device number 36
[  969.170134] usb 1-8.1: new full-speed USB device number 37 using xhci_hcd
[  969.515476] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[  969.515481] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  969.515483] usb 1-8.1: Product: Gaming Mouse
[  969.515485] usb 1-8.1: Manufacturer: PixArt
[  969.552892] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0021/input/input50
[  969.553343] hid-generic 0003:093A:2530.0021: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[  991.197811] fuse: init (API version 7.31)
[  991.197877] *** VALIDATE fuse ***
[  991.197882] *** VALIDATE fuse ***
[  999.658349] usb 1-8.1: USB disconnect, device number 37
[ 1001.170129] usb 1-8.1: new full-speed USB device number 38 using xhci_hcd
[ 1001.515723] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[ 1001.515727] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1001.515731] usb 1-8.1: Product: Gaming Mouse
[ 1001.515732] usb 1-8.1: Manufacturer: PixArt
[ 1001.552844] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0022/input/input51
[ 1001.553022] hid-generic 0003:093A:2530.0022: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[ 1031.915605] usb 1-8.1: USB disconnect, device number 38
[ 1033.173449] usb 1-8.1: new full-speed USB device number 39 using xhci_hcd
[ 1033.518672] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[ 1033.518676] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1033.518678] usb 1-8.1: Product: Gaming Mouse
[ 1033.518680] usb 1-8.1: Manufacturer: PixArt
[ 1033.556360] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0023/input/input52
[ 1033.556690] hid-generic 0003:093A:2530.0023: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[ 1063.916823] usb 1-8.1: USB disconnect, device number 39
[ 1065.166780] usb 1-8.1: new full-speed USB device number 40 using xhci_hcd
[ 1065.519202] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[ 1065.519206] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1065.519209] usb 1-8.1: Product: Gaming Mouse
[ 1065.519211] usb 1-8.1: Manufacturer: PixArt
[ 1065.556621] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0024/input/input53
[ 1065.556837] hid-generic 0003:093A:2530.0024: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[ 1095.918096] usb 1-8.1: USB disconnect, device number 40
[ 1097.170107] usb 1-8.1: new full-speed USB device number 41 using xhci_hcd
[ 1097.519452] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[ 1097.519456] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1097.519459] usb 1-8.1: Product: Gaming Mouse
[ 1097.519461] usb 1-8.1: Manufacturer: PixArt
[ 1097.557011] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0025/input/input54
[ 1097.557235] hid-generic 0003:093A:2530.0025: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[ 1127.919344] usb 1-8.1: USB disconnect, device number 41
[ 1129.430094] usb 1-8.1: new full-speed USB device number 42 using xhci_hcd
[ 1129.775718] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[ 1129.775722] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1129.775725] usb 1-8.1: Product: Gaming Mouse
[ 1129.775727] usb 1-8.1: Manufacturer: PixArt
[ 1129.813144] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0026/input/input55
[ 1129.813383] hid-generic 0003:093A:2530.0026: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[ 1159.920586] usb 1-8.1: USB disconnect, device number 42
[ 1161.433420] usb 1-8.1: new full-speed USB device number 43 using xhci_hcd
[ 1161.783628] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[ 1161.783630] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1161.783631] usb 1-8.1: Product: Gaming Mouse
[ 1161.783632] usb 1-8.1: Manufacturer: PixArt
[ 1161.820004] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0027/input/input56
[ 1161.820273] hid-generic 0003:093A:2530.0027: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[ 1177.956851] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1177.958313] ata6.00: irq_stat 0x40000001
[ 1177.959473] ata6.00: failed command: FLUSH CACHE EXT
[ 1177.960651] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 12
                        res 71/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1177.963541] ata6.00: status: { DRDY DF ERR }
[ 1177.965261] ata6.00: error: { ABRT }
[ 1177.967346] ata6.00: configured for UDMA/133
[ 1177.967349] ata6.00: device reported invalid CHS sector 0
[ 1177.967356] ata6: EH complete
[ 1177.979805] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1177.981531] ata6.00: irq_stat 0x40000001
[ 1177.982788] ata6.00: failed command: FLUSH CACHE EXT
[ 1177.984465] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 21
                        res 71/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1177.987853] ata6.00: status: { DRDY DF ERR }
[ 1177.989537] ata6.00: error: { ABRT }
[ 1177.991548] ata6.00: configured for UDMA/133
[ 1177.991551] ata6.00: device reported invalid CHS sector 0
[ 1177.991555] ata6: EH complete
[ 1178.003135] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1178.004540] ata6.00: irq_stat 0x40000001
[ 1178.005433] ata6.00: failed command: FLUSH CACHE EXT
[ 1178.006327] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 29
                        res 71/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1178.008132] ata6.00: status: { DRDY DF ERR }
[ 1178.008969] ata6.00: error: { ABRT }
[ 1178.009912] ata6.00: configured for UDMA/133
[ 1178.009914] ata6.00: device reported invalid CHS sector 0
[ 1178.009915] ata6: EH complete
[ 1178.039790] ata6.00: NCQ disabled due to excessive errors
[ 1178.039792] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1178.040702] ata6.00: irq_stat 0x40000001
[ 1178.041606] ata6.00: failed command: FLUSH CACHE EXT
[ 1178.042507] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 15
                        res 71/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1178.044315] ata6.00: status: { DRDY DF ERR }
[ 1178.045217] ata6.00: error: { ABRT }
[ 1178.046341] ata6.00: configured for UDMA/133
[ 1178.046342] ata6.00: device reported invalid CHS sector 0
[ 1178.046344] ata6: EH complete
[ 1178.079794] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1178.081229] ata6.00: irq_stat 0x40000001
[ 1178.082349] ata6.00: failed command: FLUSH CACHE EXT
[ 1178.083471] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 28
                        res 71/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1178.085686] ata6.00: status: { DRDY DF ERR }
[ 1178.086782] ata6.00: error: { ABRT }
[ 1178.088226] ata6.00: configured for UDMA/133
[ 1178.088228] ata6.00: device reported invalid CHS sector 0
[ 1178.088231] ata6: EH complete
[ 1178.099797] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1178.100640] ata6.00: irq_stat 0x40000001
[ 1178.101469] ata6.00: failed command: FLUSH CACHE EXT
[ 1178.102298] ata6.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 9
                        res 71/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1178.104278] ata6.00: status: { DRDY DF ERR }
[ 1178.105375] ata6.00: error: { ABRT }
[ 1178.107621] ata6.00: configured for UDMA/133
[ 1178.107626] ata6.00: device reported invalid CHS sector 0
[ 1178.107636] sd 5:0:0:0: [sda] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1178.107640] sd 5:0:0:0: [sda] tag#9 Sense Key : Illegal Request [current] 
[ 1178.107644] sd 5:0:0:0: [sda] tag#9 Add. Sense: Unaligned write command
[ 1178.107648] sd 5:0:0:0: [sda] tag#9 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[ 1178.107654] blk_update_request: I/O error, dev sda, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[ 1178.109291] ata6: EH complete
[ 1191.921836] usb 1-8.1: USB disconnect, device number 43
[ 1193.426751] usb 1-8.1: new full-speed USB device number 44 using xhci_hcd
[ 1193.776204] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[ 1193.776209] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1193.776212] usb 1-8.1: Product: Gaming Mouse
[ 1193.776214] usb 1-8.1: Manufacturer: PixArt
[ 1193.813722] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0028/input/input57
[ 1193.813912] hid-generic 0003:093A:2530.0028: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[ 1223.923096] usb 1-8.1: USB disconnect, device number 44
[ 1225.430074] usb 1-8.1: new full-speed USB device number 45 using xhci_hcd
[ 1225.782451] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[ 1225.782455] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1225.782458] usb 1-8.1: Product: Gaming Mouse
[ 1225.782460] usb 1-8.1: Manufacturer: PixArt
[ 1225.819871] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.0029/input/input58
[ 1225.820373] hid-generic 0003:093A:2530.0029: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[ 1232.070064] usb 1-4: new high-speed USB device number 46 using xhci_hcd
[ 1232.110414] usb 1-4: New USB device found, idVendor=1307, idProduct=0165, bcdDevice= 1.00
[ 1232.110418] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1232.110420] usb 1-4: Product: USB Mass Storage Device
[ 1232.110422] usb 1-4: Manufacturer: USBest Technology
[ 1232.110424] usb 1-4: SerialNumber: 00000000002000
[ 1232.119459] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 1232.120048] scsi host10: usb-storage 1-4:1.0
[ 1233.150427] scsi 10:0:0:0: Direct-Access     Ut165    USB2FlashStorage 0.00 PQ: 0 ANSI: 2
[ 1233.151209] sd 10:0:0:0: [sdc] 7897088 512-byte logical blocks: (4.04 GB/3.77 GiB)
[ 1233.151579] sd 10:0:0:0: [sdc] Write Protect is off
[ 1233.151581] sd 10:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 1233.151951] sd 10:0:0:0: [sdc] Asking for cache data failed
[ 1233.154323] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[ 1233.354192]  sdc:
[ 1233.555401] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[ 1255.924327] usb 1-8.1: USB disconnect, device number 45
[ 1257.028941] FAT-fs (sdc): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1257.430078] usb 1-8.1: new full-speed USB device number 47 using xhci_hcd
[ 1257.778696] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[ 1257.778700] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1257.778703] usb 1-8.1: Product: Gaming Mouse
[ 1257.778705] usb 1-8.1: Manufacturer: PixArt
[ 1257.815821] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.002A/input/input59
[ 1257.816042] hid-generic 0003:093A:2530.002A: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[ 1287.925572] usb 1-8.1: USB disconnect, device number 47
[ 1289.433391] usb 1-8.1: new full-speed USB device number 48 using xhci_hcd
[ 1289.779044] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[ 1289.779048] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1289.779051] usb 1-8.1: Product: Gaming Mouse
[ 1289.779053] usb 1-8.1: Manufacturer: PixArt
[ 1289.816055] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.002B/input/input60
[ 1289.816239] hid-generic 0003:093A:2530.002B: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[ 1319.926793] usb 1-8.1: USB disconnect, device number 48
[ 1321.436719] usb 1-8.1: new full-speed USB device number 49 using xhci_hcd
[ 1321.786183] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[ 1321.786188] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1321.786191] usb 1-8.1: Product: Gaming Mouse
[ 1321.786193] usb 1-8.1: Manufacturer: PixArt
[ 1321.823585] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.002C/input/input61
[ 1321.823816] hid-generic 0003:093A:2530.002C: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[ 1352.184076] usb 1-8.1: USB disconnect, device number 49
[ 1353.440038] usb 1-8.1: new full-speed USB device number 50 using xhci_hcd
[ 1353.785442] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[ 1353.785447] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1353.785450] usb 1-8.1: Product: Gaming Mouse
[ 1353.785451] usb 1-8.1: Manufacturer: PixArt
[ 1353.822833] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.002D/input/input62
[ 1353.823056] hid-generic 0003:093A:2530.002D: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[ 1384.185324] usb 1-8.1: USB disconnect, device number 50
[ 1385.443373] usb 1-8.1: new full-speed USB device number 51 using xhci_hcd
[ 1385.795739] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[ 1385.795743] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1385.795746] usb 1-8.1: Product: Gaming Mouse
[ 1385.795748] usb 1-8.1: Manufacturer: PixArt
[ 1385.833103] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.002E/input/input63
[ 1385.833323] hid-generic 0003:093A:2530.002E: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0
[ 1416.186546] usb 1-8.1: USB disconnect, device number 51
[ 1417.443383] usb 1-8.1: new full-speed USB device number 52 using xhci_hcd
[ 1417.788931] usb 1-8.1: New USB device found, idVendor=093a, idProduct=2530, bcdDevice= 1.00
[ 1417.788936] usb 1-8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1417.788939] usb 1-8.1: Product: Gaming Mouse
[ 1417.788941] usb 1-8.1: Manufacturer: PixArt
[ 1417.826368] input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:093A:2530.002F/input/input64
[ 1417.826770] hid-generic 0003:093A:2530.002F: input,hidraw0: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:15:00.0-8.1/input0

Habt ihr eine Idee, was das SSD-Problem ist? Ist die SSD im Eimer, oder kann man da noch etwas reparieren und neu installieren?

Offline

Schnellantwort auf dieses Thema

Schreibe deinen Beitrag und versende ihn
Deine Antwort

Fußzeile des Forums