Du bist nicht angemeldet.

#1 01.03.2020 09:37:49

Brathorun
Mitglied

Leichteste GUI für ThinkPad und 4k Monitor?

Servus,

vorneweg: bitte keine Glaubensgrundsätze über den Denktop führen. Der Denktop ist mir im großen und ganzen egal. Die GUI soll mir lediglich als Basis für grafische Anwendungen dienen und mir im Alltag nicht im Weg stehen. Vor dem Terminal schreck ich nicht zurück...

Aktuell bin ich mit Gnome unterwegs von Haus aus macht es keine Probleme in Verbindung mit meinem Thinkpad von 2016 und der Dockingstation. Alles läuft sehr flüssig und geschmeidig. Sobald ich aber das Notebook in die Dockingstation stecke bzw. den 4k Monitor anschließe, fühlt sich das ganze einfach nicht mehr gut an.

Es ruckelt wie Teufel. Besonders macht sich das in den Browsern bemerkbar. Wobei es im Firefox noch am erträglichsten wirkt. Das scrollen ist unerträglich und YouTube die Pest... Am Ende schalte ich dann doch wieder mein PC an. Dabei wollte ich das Notebook einsetzen, weil ich die Rechenleistung des PCs nur noch selten brauche.

Daher die Frage: Welche GUI ist, objektiv betrachtet, die sparsamste?

Oder sind meine Probleme tatsächlich in der GUI zu suchen?

Achja - Nachtag:
Wenn die Streams einmal laufen (Youtube, Netflix und co.), dann laufen die Übertragungen flüssig.

Beitrag geändert von Brathorun (01.03.2020 09:45:15)

Offline

#2 01.03.2020 09:46:00

niemand
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Daher die Frage: Welche GUI ist, objektiv betrachtet, die sparsamste?

Was verstehst du unter „GUI“? Windowmanager? Desktop Environment?

Oder sind meine Probleme tatsächlich in der GUI zu suchen?

Unabhängig von der Frage oben: mit höchster Wahrscheinlichkeit hat deine grafische Oberfläche nichts mit dem Problem zu tun. Der Beschreibung nach würde ich am ehesten darauf tippen, dass du den UHD-Monitor (4k ist selten, so dass ich einfach mal UHD unterstelle) mit 30Hz anfährst. Dann fühlt sich alles etwas träge und gummiartig an. Das ist übrigens auch der Grund, warum mein T440 nicht am UHD-Monitor hängt: die Hardware gibt nur 30Hz bei der Auflösung her, und damit mag ich nicht arbeiten.

Herausfinden, mit welchen Parametern der Monitor angesteuert wird, kannst du zum Beispiel mit ›xrandr‹.

Beitrag geändert von niemand (01.03.2020 09:49:38)

Offline

#3 01.03.2020 09:57:46

Brathorun
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Die abfrage mit xrandr bringt folgendes:

Screen 0: minimum 16 x 16, current 3840 x 2160, maximum 32767 x 32767
XWAYLAND1 connected 3840x2160+0+0 (normal left inverted right x axis y axis) 940mm x 530mm
   3840x2160     59.98*+

Offline

#4 01.03.2020 10:06:55

Greg
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Ich würde erst mal versuchen herauszubekommen was da rumbockt wenn die Dockingstation dran ist.
Steht die CPU permanent auf 100% Last? Wie sieht der Ramverbrauch aus? Mit diversen Tasktools wie top kann man das rausbekommen welche Funktion da Resourcen verbraucht. Was für einen Grafiktreiber benutzt du?
Ich denke wenn gnome einmal geladen ist, dann wird der eigentlich nicht der große Bremser sein.
XFCE4, LXDE sind beides im Vergleich zu gnome Leichtgewichte.
Noch leichter gehts mit diversen Windowmanagern. Da steht einiges im Wiki zu den Desktops und Windowmanagern.
Du kannst aber auch einen Leichtgewichtigen Desktop installieren und damit testen. Ohne gnome gleich runterzuschmeißen.
Auch ein schneller test. Installier dir mal fluxbox. Da wird kaum was installiert und du kannst damit schnell mal testen. Ist auch ruckzuck wieder deinstalliert.
Gruß aus DN
Greg

Offline

#5 01.03.2020 11:07:55

Brathorun
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Die CPU schwankt zwischen 1% und 95%...

Aber ich hab eine Akzeptable Lösung gefunden. Ich stelle die Bildwiederholrate auf 50. Damit wird das surfen deutlich angenehmer.

Das muss doch irgend etwas damit zu tun haben. Das Notebook scheint mit den 4k@60fps zu kämpfen!?

EDIT:
Ich bin komplett ratlos!
Vergesst das mit den 50 fps.

Das surf-Verhalten ist von der Größe des Browser-Fensters Abhängig! hmm

Beitrag geändert von Brathorun (01.03.2020 11:13:29)

Offline

#6 01.03.2020 11:44:41

brikler
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

rein vom browser her, wenn ers hergibt, würde ich hardware unterstützung einschalten, dann kümmert sich die graka drum und die cpu hat ruhe.
für den ff: https://wiki.archlinux.org/index.php/Fi … erformance

layers.acceleration.force-enabled => true

Offline

#7 01.03.2020 12:12:23

Brathorun
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Mit dieser Einstellung verbessert sich zwar das Scrollen. Jedoch ist die CPU hier auf YouTube fast permanent auf Anschlag und die Stream ruckeln. Hab die Einstellung wieder rückgängig machen müssen.

Übrigens hab ich keine Grafiktreiber für den Intelchip installiert...

Offline

#8 01.03.2020 12:14:18

niemand
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Übrigens hab ich keine Grafiktreiber für den Intelchip installiert.

Wenn das stimmen sollte, also das Modul für den Grafikchip nicht geladen ist, wundert mich allenfalls, dass es überhaupt bedienbar ist.

Offline

#9 01.03.2020 12:24:41

Brathorun
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

niemand schrieb:

Übrigens hab ich keine Grafiktreiber für den Intelchip installiert.

Wenn das stimmen sollte, also das Modul für den Grafikchip nicht geladen ist, wundert mich allenfalls, dass es überhaupt bedienbar ist.

Wie meinst du das?
Der Grafiktreiber für Intel ist doch schon im Kernel implementiert?!

Offline

#10 01.03.2020 12:48:19

Greg
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Brathorun schrieb:

Die CPU schwankt zwischen 1% und 95%......

Was ist denn nu für ein Grafiktreiber installiert?
lspci |grep VGA bitte mal posten.
Dann eine xorg.log auch mal hier posten.
Wenn das Ganze per Vesa oder fb so läuft, dann wundert es mich garnicht, dass die CPU alles machen muß.
Eine journalctl könnte auch interessant sein.

Offline

#11 01.03.2020 13:10:43

Brathorun
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

$lspci |grep VGA
00:02.0 VGA compatible controller: Intel Corporation Skylake GT2 [HD Graphics 520] (rev 07)

$ journalctl
-- Logs begin at Sat 2020-02-22 13:18:52 CET, end at Sun 2020-03-01 12:06:15 CET. --
Feb 22 13:18:52 freespace kernel: microcode: microcode updated early to revision 0xd6, date = 2019-10-03
Feb 22 13:18:52 freespace kernel: Linux version 5.5.5-arch1-1 (linux@archlinux) (gcc version 9.2.1 20200130 (Arch Linux 9.2.1+20200130-2)) #1 SMP PREEMPT Thu, 20 Feb 2020 18:23:09 +0000
Feb 22 13:18:52 freespace kernel: Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ff4ed541-3255-4c9a-8395-26d616c988dd rw loglevel=3 quiet
Feb 22 13:18:52 freespace kernel: KERNEL supported cpus:
Feb 22 13:18:52 freespace kernel:   Intel GenuineIntel
Feb 22 13:18:52 freespace kernel:   AMD AuthenticAMD
Feb 22 13:18:52 freespace kernel:   Hygon HygonGenuine
Feb 22 13:18:52 freespace kernel:   Centaur CentaurHauls
Feb 22 13:18:52 freespace kernel:   zhaoxin   Shanghai 
Feb 22 13:18:52 freespace kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
Feb 22 13:18:52 freespace kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
Feb 22 13:18:52 freespace kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
Feb 22 13:18:52 freespace kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
Feb 22 13:18:52 freespace kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
Feb 22 13:18:52 freespace kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
Feb 22 13:18:52 freespace kernel: x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
Feb 22 13:18:52 freespace kernel: x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
Feb 22 13:18:52 freespace kernel: x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
Feb 22 13:18:52 freespace kernel: BIOS-provided physical RAM map:
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x000000000009d000-0x00000000000fffff] reserved
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x0000000000100000-0x0000000077c7cfff] usable
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x0000000077c7d000-0x0000000077c7efff] reserved
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x0000000077c7f000-0x0000000077f78fff] usable
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x0000000077f79000-0x0000000077f79fff] reserved
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x0000000077f7a000-0x00000000cca86fff] usable
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x00000000cca87000-0x00000000cca87fff] ACPI NVS
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x00000000cca88000-0x00000000ccab1fff] reserved
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x00000000ccab2000-0x00000000d63b5fff] usable
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x00000000d63b6000-0x00000000d6406fff] type 20
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x00000000d6407000-0x00000000d7f78fff] reserved
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x00000000d7f79000-0x00000000d7fc8fff] ACPI NVS
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x00000000d7fc9000-0x00000000d7ffefff] ACPI data
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x00000000d7fff000-0x00000000d7ffffff] usable
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x00000000d8000000-0x00000000d80fffff] reserved
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x00000000d8600000-0x00000000dc7fffff] reserved
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
Feb 22 13:18:52 freespace kernel: BIOS-e820: [mem 0x0000000100000000-0x00000003217fffff] usable
Feb 22 13:18:52 freespace kernel: NX (Execute Disable) protection: active
Feb 22 13:18:52 freespace kernel: efi: EFI v2.40 by Lenovo
Feb 22 13:18:52 freespace kernel: efi:  SMBIOS=0xd7c03000  ACPI=0xd7ffe000  ACPI 2.0=0xd7ffe014  ESRT=0xd70d1000
Feb 22 13:18:52 freespace kernel: SMBIOS 2.8 present.
Feb 22 13:18:52 freespace kernel: DMI: LENOVO 20FN003PGE/20FN003PGE, BIOS R06ET41W (1.15 ) 09/06/2016
Feb 22 13:18:52 freespace kernel: tsc: Detected 2800.000 MHz processor
Feb 22 13:18:52 freespace kernel: tsc: Detected 2799.927 MHz TSC
Feb 22 13:18:52 freespace kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Feb 22 13:18:52 freespace kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Feb 22 13:18:52 freespace kernel: last_pfn = 0x321800 max_arch_pfn = 0x400000000
Feb 22 13:18:52 freespace kernel: MTRR default type: write-back
Feb 22 13:18:52 freespace kernel: MTRR fixed ranges enabled:
Feb 22 13:18:52 freespace kernel:   00000-9FFFF write-back
Feb 22 13:18:52 freespace kernel:   A0000-BFFFF uncachable
Feb 22 13:18:52 freespace kernel:   C0000-FFFFF write-protect
Feb 22 13:18:52 freespace kernel: MTRR variable ranges enabled:
Feb 22 13:18:52 freespace kernel:   0 base 00E0000000 mask 7FE0000000 uncachable
Feb 22 13:18:52 freespace kernel:   1 base 00DC000000 mask 7FFC000000 uncachable
Feb 22 13:18:52 freespace kernel:   2 base 00DA000000 mask 7FFE000000 uncachable
Feb 22 13:18:52 freespace kernel:   3 disabled
Feb 22 13:18:52 freespace kernel:   4 disabled
Feb 22 13:18:52 freespace kernel:   5 disabled
Feb 22 13:18:52 freespace kernel:   6 disabled
Feb 22 13:18:52 freespace kernel:   7 disabled
Feb 22 13:18:52 freespace kernel:   8 disabled
Feb 22 13:18:52 freespace kernel:   9 disabled
Feb 22 13:18:52 freespace kernel: x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
Feb 22 13:18:52 freespace kernel: last_pfn = 0xd8000 max_arch_pfn = 0x400000000
Feb 22 13:18:52 freespace kernel: esrt: Reserving ESRT space from 0x00000000d70d1000 to 0x00000000d70d1060.
Feb 22 13:18:52 freespace kernel: check: Scanning 1 areas for low memory corruption
Feb 22 13:18:52 freespace kernel: Using GB pages for direct mapping
Feb 22 13:18:52 freespace kernel: BRK [0x1de001000, 0x1de001fff] PGTABLE
Feb 22 13:18:52 freespace kernel: BRK [0x1de002000, 0x1de002fff] PGTABLE
Feb 22 13:18:52 freespace kernel: BRK [0x1de003000, 0x1de003fff] PGTABLE
Feb 22 13:18:52 freespace kernel: BRK [0x1de004000, 0x1de004fff] PGTABLE
Feb 22 13:18:52 freespace kernel: BRK [0x1de005000, 0x1de005fff] PGTABLE
Feb 22 13:18:52 freespace kernel: BRK [0x1de006000, 0x1de006fff] PGTABLE
Feb 22 13:18:52 freespace kernel: BRK [0x1de007000, 0x1de007fff] PGTABLE
Feb 22 13:18:52 freespace kernel: BRK [0x1de008000, 0x1de008fff] PGTABLE
Feb 22 13:18:52 freespace kernel: BRK [0x1de009000, 0x1de009fff] PGTABLE
Feb 22 13:18:52 freespace kernel: BRK [0x1de00a000, 0x1de00afff] PGTABLE
Feb 22 13:18:52 freespace kernel: BRK [0x1de00b000, 0x1de00bfff] PGTABLE
Feb 22 13:18:52 freespace kernel: BRK [0x1de00c000, 0x1de00cfff] PGTABLE
Feb 22 13:18:52 freespace kernel: Secure boot could not be determined
Feb 22 13:18:52 freespace kernel: RAMDISK: [mem 0x3681f000-0x37406fff]
Feb 22 13:18:52 freespace kernel: ACPI: Early table checksum verification disabled
Feb 22 13:18:52 freespace kernel: ACPI: RSDP 0x00000000D7FFE014 000024 (v02 LENOVO)
Feb 22 13:18:52 freespace kernel: ACPI: XSDT 0x00000000D7FD0188 0000EC (v01 LENOVO TP-R06   00000000 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: FACP 0x00000000D7FF4000 0000F4 (v05 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: DSDT 0x00000000D7FDD000 0125B5 (v02 LENOVO TP-R06   00001150 INTL 20141107)
Feb 22 13:18:52 freespace kernel: ACPI: FACS 0x00000000D7F94000 000040
Feb 22 13:18:52 freespace kernel: ACPI: TCPA 0x00000000D7FFC000 000032 (v02 LENOVO TP-R06   00000002 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: SSDT 0x00000000D7FFB000 0003A2 (v02 LENOVO TcgTable 00001000 INTL 20141107)
Feb 22 13:18:52 freespace kernel: ACPI: UEFI 0x00000000D7FAB000 000042 (v01 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: SSDT 0x00000000D7FF6000 004E2E (v02 LENOVO SaSsdt   00003000 INTL 20141107)
Feb 22 13:18:52 freespace kernel: ACPI: SSDT 0x00000000D7FF5000 0005C5 (v02 LENOVO PerfTune 00001000 INTL 20141107)
Feb 22 13:18:52 freespace kernel: ACPI: ECDT 0x00000000D7FF3000 000052 (v01 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: HPET 0x00000000D7FF2000 000038 (v01 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: APIC 0x00000000D7FF1000 0000BC (v03 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: MCFG 0x00000000D7FF0000 00003C (v01 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: SSDT 0x00000000D7FDB000 0018D2 (v01 LENOVO SataAhci 00001000 INTL 20141107)
Feb 22 13:18:52 freespace kernel: ACPI: SSDT 0x00000000D7FDA000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20141107)
Feb 22 13:18:52 freespace kernel: ACPI: DBGP 0x00000000D7FD9000 000034 (v01 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: DBG2 0x00000000D7FD8000 000054 (v00 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: BOOT 0x00000000D7FD7000 000028 (v01 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: BATB 0x00000000D7FD6000 000046 (v01 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: SLIC 0x00000000D7FD5000 000176 (v01 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: SSDT 0x00000000D7FD4000 000E73 (v02 LENOVO CpuSsdt  00003000 INTL 20141107)
Feb 22 13:18:52 freespace kernel: ACPI: SSDT 0x00000000D7FD3000 0003D9 (v02 LENOVO CtdpB    00001000 INTL 20141107)
Feb 22 13:18:52 freespace kernel: ACPI: MSDM 0x00000000D7FD2000 000055 (v03 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: DMAR 0x00000000D7FD1000 0000A8 (v01 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: ASF! 0x00000000D7FFD000 0000A5 (v32 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: FPDT 0x00000000D7FCF000 000044 (v01 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: BGRT 0x00000000D7FCE000 000038 (v01 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: UEFI 0x00000000D7F92000 00013E (v01 LENOVO TP-R06   00001150 PTEC 00000002)
Feb 22 13:18:52 freespace kernel: ACPI: Local APIC address 0xfee00000
Feb 22 13:18:52 freespace kernel: No NUMA configuration found
Feb 22 13:18:52 freespace kernel: Faking a node at [mem 0x0000000000000000-0x00000003217fffff]
Feb 22 13:18:52 freespace kernel: NODE_DATA(0) allocated [mem 0x3217fc000-0x3217fffff]
[...]

Unter /var/log/ findet sich kein xorg.log File...

Offline

#12 01.03.2020 13:53:11

Greg
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Brathorun schrieb:

lspci |grep VGA
00:02.0 VGA compatible controller: Intel Corporation Skylake GT2 [HD Graphics 520] (rev 07)

Dann brauchst du den i915.
steht alles hier:
https://wiki.archlinux.de/title/Intel
Das die HD520 eine ziemlich schlappe GPU ist, könnte dann das Problem bei 4K Monitoren schon sein.
Technische Daten:
https://www.intel.de/content/www/de/de/ … s-520.html

Die xorg.log befindet sich in ~.local/share/xorg/Xorg.0.log

Beitrag geändert von Greg (01.03.2020 14:00:04)

Offline

#13 01.03.2020 14:29:12

Brathorun
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Der wechsel des Treibers hat nichts gebracht...

Hier mal die log Datei: ganz unter dem Motto: "your system is too slow"

[    64.457] (--) Log file renamed from "/home/USERXXX/.local/share/xorg/Xorg.pid-1585.log" to "/home/USERXXX/.local/share/xorg/Xorg.0.log"
[    64.458] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    64.458]
X.Org X Server 1.20.7
X Protocol Version 11, Revision 0
[    64.458] Build Operating System: Linux Arch Linux
[    64.458] Current Operating System: Linux freespace 5.5.5-arch1-1 #1 SMP PREEMPT Thu, 20 Feb 2020 18:23:09 +0000 x86_64
[    64.458] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ff4ed541-3255-4c9a-8395-26d616c988dd rw loglevel=3 quiet
[    64.458] Build Date: 14 January 2020  07:13:52AM
[    64.458] 
[    64.458] Current version of pixman: 0.38.4
[    64.458]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    64.458] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    64.458] (==) Log file: "/home/USERXXX/.local/share/xorg/Xorg.0.log", Time: Sun Mar  1 13:05:54 2020
[    64.458] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    64.458] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    64.459] (==) No Layout section.  Using the first Screen section.
[    64.459] (==) No screen section available. Using defaults.
[    64.459] (**) |-->Screen "Default Screen Section" (0)
[    64.459] (**) |   |-->Monitor "<default monitor>"
[    64.460] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    64.460] (==) Automatically adding devices
[    64.460] (==) Automatically enabling devices
[    64.460] (==) Automatically adding GPU devices
[    64.460] (==) Automatically binding GPU devices
[    64.460] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    64.460] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    64.460]     Entry deleted from font path.
[    64.460] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    64.460]     Entry deleted from font path.
[    64.460] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    64.460]     Entry deleted from font path.
[    64.460] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    64.460]     Entry deleted from font path.
[    64.460] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    64.460]     Entry deleted from font path.
[    64.460] (==) FontPath set to:
    /usr/share/fonts/TTF
[    64.460] (==) ModulePath set to "/usr/lib/xorg/modules"
[    64.460] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    64.460] (II) Module ABI versions:
[    64.460]     X.Org ANSI C Emulation: 0.4
[    64.460]     X.Org Video Driver: 24.1
[    64.460]     X.Org XInput driver : 24.1
[    64.460]     X.Org Server Extension : 10.0
[    64.461] (++) using VT number 2

[    64.465] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[    64.467] (II) xfree86: Adding drm device (/dev/dri/card0)
[    64.468] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[    64.470] (--) PCI:*(0@0:2:0) 8086:1916:17aa:5053 rev 7, Mem @ 0xf0000000/16777216, 0xe0000000/268435456, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072
[    64.470] (II) Open ACPI successful (/var/run/acpid.socket)
[    64.470] (II) LoadModule: "glx"
[    64.471] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    64.474] (II) Module glx: vendor="X.Org Foundation"
[    64.474]     compiled for 1.20.7, module version = 1.0.0
[    64.474]     ABI class: X.Org Server Extension, version 10.0
[    64.474] (==) Matched intel as autoconfigured driver 0
[    64.474] (==) Matched modesetting as autoconfigured driver 1
[    64.474] (==) Matched fbdev as autoconfigured driver 2
[    64.474] (==) Matched vesa as autoconfigured driver 3
[    64.474] (==) Assigned the driver to the xf86ConfigLayout
[    64.474] (II) LoadModule: "intel"
[    64.474] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    64.476] (II) Module intel: vendor="X.Org Foundation"
[    64.476]     compiled for 1.20.6, module version = 2.99.917
[    64.476]     Module class: X.Org Video Driver
[    64.476]     ABI class: X.Org Video Driver, version 24.0
[    64.476] (II) LoadModule: "modesetting"
[    64.476] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    64.477] (II) Module modesetting: vendor="X.Org Foundation"
[    64.477]     compiled for 1.20.7, module version = 1.20.7
[    64.477]     Module class: X.Org Video Driver
[    64.477]     ABI class: X.Org Video Driver, version 24.1
[    64.477] (II) LoadModule: "fbdev"
[    64.478] (WW) Warning, couldn't open module fbdev
[    64.478] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    64.478] (II) LoadModule: "vesa"
[    64.478] (WW) Warning, couldn't open module vesa
[    64.478] (EE) Failed to load module "vesa" (module does not exist, 0)
[    64.478] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    64.478] (II) intel: Driver for Intel(R) HD Graphics
[    64.478] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    64.478] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    64.478] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    64.479] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    64.479] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20191101
[    64.479] (II) intel(0): SNA compiled from 2.99.917-899-gf66d3954
[    64.497] (WW) Falling back to old probe method for modesetting
[    64.497] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    64.498] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 520
[    64.498] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[    64.498] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    64.498] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    64.498] (==) intel(0): RGB weight 888
[    64.498] (==) intel(0): Default visual is TrueColor
[    64.499] (II) intel(0): Output eDP1 has no monitor section
[    64.499] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    64.499] (II) intel(0): Enabled output eDP1
[    64.499] (II) intel(0): Output DP1 has no monitor section
[    64.500] (II) intel(0): Enabled output DP1
[    64.500] (II) intel(0): Output HDMI1 has no monitor section
[    64.500] (II) intel(0): Enabled output HDMI1
[    64.500] (II) intel(0): Output DP2 has no monitor section
[    64.500] (II) intel(0): Enabled output DP2
[    64.500] (II) intel(0): Output HDMI2 has no monitor section
[    64.500] (II) intel(0): Enabled output HDMI2
[    64.500] (II) intel(0): Output DP2-1 has no monitor section
[    64.500] (II) intel(0): Enabled output DP2-1
[    64.500] (II) intel(0): Output DP2-2 has no monitor section
[    64.500] (II) intel(0): Enabled output DP2-2
[    64.500] (II) intel(0): Output DP2-3 has no monitor section
[    64.501] (II) intel(0): Enabled output DP2-3
[    64.501] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    64.501] (II) intel(0): Output VIRTUAL1 has no monitor section
[    64.501] (II) intel(0): Enabled output VIRTUAL1
[    64.501] (--) intel(0): Output DP2-1 using initial mode 3840x2160 on pipe 1
[    64.501] (==) intel(0): TearFree disabled
[    64.501] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    64.501] (==) intel(0): DPI set to (96, 96)
[    64.501] (II) Loading sub module "dri3"
[    64.501] (II) LoadModule: "dri3"
[    64.501] (II) Module "dri3" already built-in
[    64.501] (II) Loading sub module "dri2"
[    64.501] (II) LoadModule: "dri2"
[    64.501] (II) Module "dri2" already built-in
[    64.501] (II) Loading sub module "present"
[    64.501] (II) LoadModule: "present"
[    64.501] (II) Module "present" already built-in
[    64.502] (II) UnloadModule: "modesetting"
[    64.502] (II) Unloading modesetting
[    64.505] (II) intel(0): SNA initialized with Skylake (gen9) backend
[    64.505] (==) intel(0): Backing store enabled
[    64.505] (==) intel(0): Silken mouse disabled
[    64.505] (II) intel(0): HW Cursor enabled
[    64.506] (==) intel(0): DPMS enabled
[    64.506] (==) intel(0): Display hotplug detection enabled
[    64.506] (II) intel(0): [DRI2] Setup complete
[    64.506] (II) intel(0): [DRI2]   DRI driver: i965
[    64.506] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    64.506] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[    64.506] (II) intel(0): hardware support for Present enabled
[    64.506] (II) Initializing extension Generic Event Extension
[    64.507] (II) Initializing extension SHAPE
[    64.507] (II) Initializing extension MIT-SHM
[    64.507] (II) Initializing extension XInputExtension
[    64.507] (II) Initializing extension XTEST
[    64.507] (II) Initializing extension BIG-REQUESTS
[    64.507] (II) Initializing extension SYNC
[    64.507] (II) Initializing extension XKEYBOARD
[    64.507] (II) Initializing extension XC-MISC
[    64.507] (II) Initializing extension SECURITY
[    64.507] (II) Initializing extension XFIXES
[    64.507] (II) Initializing extension RENDER
[    64.507] (II) Initializing extension RANDR
[    64.507] (II) Initializing extension COMPOSITE
[    64.507] (II) Initializing extension DAMAGE
[    64.507] (II) Initializing extension MIT-SCREEN-SAVER
[    64.507] (II) Initializing extension DOUBLE-BUFFER
[    64.507] (II) Initializing extension RECORD
[    64.507] (II) Initializing extension DPMS
[    64.507] (II) Initializing extension Present
[    64.507] (II) Initializing extension DRI3
[    64.507] (II) Initializing extension X-Resource
[    64.507] (II) Initializing extension XVideo
[    64.507] (II) Initializing extension XVideo-MotionCompensation
[    64.507] (II) Initializing extension GLX
[    64.517] (II) AIGLX: Loaded and initialized i965
[    64.517] (II) GLX: Initialized DRI2 GL provider for screen 0
[    64.517] (II) Initializing extension XFree86-VidModeExtension
[    64.517] (II) Initializing extension XFree86-DGA
[    64.517] (II) Initializing extension XFree86-DRI
[    64.517] (II) Initializing extension DRI2
[    64.529] (II) intel(0): switch to mode 3840x2160@60.0 on DP2-1 using pipe 1, position (0, 0), rotation normal, reflection none
[    64.537] (II) intel(0): Setting screen physical size to 1016 x 571
[    64.572] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    64.572] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    64.572] (**) Power Button: Applying InputClass "system-keyboard"
[    64.572] (II) LoadModule: "libinput"
[    64.572] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    64.574] (II) Module libinput: vendor="X.Org Foundation"
[    64.574]     compiled for 1.20.5, module version = 0.29.0
[    64.574]     Module class: X.Org XInput Driver
[    64.574]     ABI class: X.Org XInput driver, version 24.1
[    64.574] (II) Using input driver 'libinput' for 'Power Button'
[    64.576] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 18 paused 0
[    64.576] (**) Power Button: always reports core events
[    64.576] (**) Option "Device" "/dev/input/event2"
[    64.576] (**) Option "_source" "server/udev"
[    64.579] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    64.579] (II) event2  - Power Button: device is a keyboard
[    64.579] (II) event2  - Power Button: device removed
[    64.579] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    64.579] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    64.579] (**) Option "xkb_layout" "de"
[    64.597] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    64.598] (II) event2  - Power Button: device is a keyboard
[    64.598] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    64.598] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    64.598] (**) Video Bus: Applying InputClass "system-keyboard"
[    64.598] (II) Using input driver 'libinput' for 'Video Bus'
[    64.599] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 21 paused 0
[    64.599] (**) Video Bus: always reports core events
[    64.599] (**) Option "Device" "/dev/input/event3"
[    64.599] (**) Option "_source" "server/udev"
[    64.600] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[    64.600] (II) event3  - Video Bus: device is a keyboard
[    64.600] (II) event3  - Video Bus: device removed
[    64.600] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[    64.600] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    64.600] (**) Option "xkb_layout" "de"
[    64.602] (II) event3  - Video Bus: is tagged by udev as: Keyboard
[    64.602] (II) event3  - Video Bus: device is a keyboard
[    64.602] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    64.602] (II) No input driver specified, ignoring this device.
[    64.602] (II) This device may have been added with another device file.
[    64.603] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    64.603] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    64.603] (**) Sleep Button: Applying InputClass "system-keyboard"
[    64.603] (II) Using input driver 'libinput' for 'Sleep Button'
[    64.603] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 22 paused 0
[    64.603] (**) Sleep Button: always reports core events
[    64.603] (**) Option "Device" "/dev/input/event1"
[    64.603] (**) Option "_source" "server/udev"
[    64.605] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    64.605] (II) event1  - Sleep Button: device is a keyboard
[    64.605] (II) event1  - Sleep Button: device removed
[    64.605] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    64.605] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    64.605] (**) Option "xkb_layout" "de"
[    64.607] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[    64.607] (II) event1  - Sleep Button: device is a keyboard
[    64.608] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event19)
[    64.608] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[    64.608] (**) Integrated Camera: Integrated C: Applying InputClass "system-keyboard"
[    64.608] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[    64.609] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 23 paused 0
[    64.609] (**) Integrated Camera: Integrated C: always reports core events
[    64.609] (**) Option "Device" "/dev/input/event19"
[    64.609] (**) Option "_source" "server/udev"
[    64.611] (II) event19 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[    64.611] (II) event19 - Integrated Camera: Integrated C: device is a keyboard
[    64.611] (II) event19 - Integrated Camera: Integrated C: device removed
[    64.611] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/input/input20/event19"
[    64.611] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 9)
[    64.611] (**) Option "xkb_layout" "de"
[    64.613] (II) event19 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[    64.613] (II) event19 - Integrated Camera: Integrated C: device is a keyboard
[    64.615] (II) config/udev: Adding input device CORSAIR CORSAIR K63 Wireless USB Receiver (/dev/input/event20)
[    64.615] (**) CORSAIR CORSAIR K63 Wireless USB Receiver: Applying InputClass "libinput keyboard catchall"
[    64.615] (**) CORSAIR CORSAIR K63 Wireless USB Receiver: Applying InputClass "system-keyboard"
[    64.615] (II) Using input driver 'libinput' for 'CORSAIR CORSAIR K63 Wireless USB Receiver'
[    64.616] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 24 paused 0
[    64.617] (**) CORSAIR CORSAIR K63 Wireless USB Receiver: always reports core events
[    64.617] (**) Option "Device" "/dev/input/event20"
[    64.617] (**) Option "_source" "server/udev"
[    64.619] (II) event20 - CORSAIR CORSAIR K63 Wireless USB Receiver: is tagged by udev as: Keyboard
[    64.619] (II) event20 - CORSAIR CORSAIR K63 Wireless USB Receiver: device is a keyboard
[    64.620] (II) event20 - CORSAIR CORSAIR K63 Wireless USB Receiver: device removed
[    64.620] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.0/0003:1B1C:1B50.0001/input/input21/event20"
[    64.620] (II) XINPUT: Adding extended input device "CORSAIR CORSAIR K63 Wireless USB Receiver" (type: KEYBOARD, id 10)
[    64.620] (**) Option "xkb_layout" "de"
[    64.621] (II) event20 - CORSAIR CORSAIR K63 Wireless USB Receiver: is tagged by udev as: Keyboard
[    64.622] (II) event20 - CORSAIR CORSAIR K63 Wireless USB Receiver: device is a keyboard
[    64.623] (II) config/udev: Adding input device CORSAIR CORSAIR K63 Wireless USB Receiver Keyboard (/dev/input/event21)
[    64.623] (**) CORSAIR CORSAIR K63 Wireless USB Receiver Keyboard: Applying InputClass "libinput keyboard catchall"
[    64.623] (**) CORSAIR CORSAIR K63 Wireless USB Receiver Keyboard: Applying InputClass "system-keyboard"
[    64.623] (II) Using input driver 'libinput' for 'CORSAIR CORSAIR K63 Wireless USB Receiver Keyboard'
[    64.623] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 25 paused 0
[    64.623] (**) CORSAIR CORSAIR K63 Wireless USB Receiver Keyboard: always reports core events
[    64.623] (**) Option "Device" "/dev/input/event21"
[    64.623] (**) Option "_source" "server/udev"
[    64.626] (II) event21 - CORSAIR CORSAIR K63 Wireless USB Receiver Keyboard: is tagged by udev as: Keyboard
[    64.626] (II) event21 - CORSAIR CORSAIR K63 Wireless USB Receiver Keyboard: device is a keyboard
[    64.627] (II) event21 - CORSAIR CORSAIR K63 Wireless USB Receiver Keyboard: device removed
[    64.627] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.1/0003:1B1C:1B50.0002/input/input22/event21"
[    64.627] (II) XINPUT: Adding extended input device "CORSAIR CORSAIR K63 Wireless USB Receiver Keyboard" (type: KEYBOARD, id 11)
[    64.627] (**) Option "xkb_layout" "de"
[    64.629] (II) event21 - CORSAIR CORSAIR K63 Wireless USB Receiver Keyboard: is tagged by udev as: Keyboard
[    64.629] (II) event21 - CORSAIR CORSAIR K63 Wireless USB Receiver Keyboard: device is a keyboard
[    64.630] (II) config/udev: Adding input device CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control (/dev/input/event22)
[    64.630] (**) CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[    64.630] (**) CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[    64.630] (II) Using input driver 'libinput' for 'CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control'
[    64.631] (II) systemd-logind: got fd for /dev/input/event22 13:86 fd 26 paused 0
[    64.631] (**) CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: always reports core events
[    64.631] (**) Option "Device" "/dev/input/event22"
[    64.631] (**) Option "_source" "server/udev"
[    64.632] (II) event22 - CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: is tagged by udev as: Keyboard
[    64.633] (II) event22 - CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: device is a keyboard
[    64.633] (II) event22 - CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: device removed
[    64.633] (II) libinput: CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: needs a virtual subdevice
[    64.633] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.1/0003:1B1C:1B50.0002/input/input23/event22"
[    64.633] (II) XINPUT: Adding extended input device "CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control" (type: MOUSE, id 12)
[    64.633] (**) Option "AccelerationScheme" "none"
[    64.633] (**) CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: (accel) selected scheme none/0
[    64.633] (**) CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: (accel) acceleration factor: 2.000
[    64.633] (**) CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: (accel) acceleration threshold: 4
[    64.635] (II) event22 - CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: is tagged by udev as: Keyboard
[    64.635] (II) event22 - CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: device is a keyboard
[    64.636] (II) config/udev: Adding input device CORSAIR CORSAIR K63 Wireless USB Receiver (/dev/input/event23)
[    64.636] (II) No input driver specified, ignoring this device.
[    64.636] (II) This device may have been added with another device file.
[    64.637] (II) config/udev: Adding input device CORSAIR CORSAIR K63 Wireless USB Receiver (/dev/input/event24)
[    64.637] (II) No input driver specified, ignoring this device.
[    64.637] (II) This device may have been added with another device file.
[    64.638] (II) config/udev: Adding input device CORSAIR CORSAIR K63 Wireless USB Receiver System Control (/dev/input/event25)
[    64.638] (**) CORSAIR CORSAIR K63 Wireless USB Receiver System Control: Applying InputClass "libinput keyboard catchall"
[    64.638] (**) CORSAIR CORSAIR K63 Wireless USB Receiver System Control: Applying InputClass "system-keyboard"
[    64.638] (II) Using input driver 'libinput' for 'CORSAIR CORSAIR K63 Wireless USB Receiver System Control'
[    64.638] (II) systemd-logind: got fd for /dev/input/event25 13:89 fd 27 paused 0
[    64.638] (**) CORSAIR CORSAIR K63 Wireless USB Receiver System Control: always reports core events
[    64.638] (**) Option "Device" "/dev/input/event25"
[    64.639] (**) Option "_source" "server/udev"
[    64.640] (II) event25 - CORSAIR CORSAIR K63 Wireless USB Receiver System Control: is tagged by udev as: Keyboard
[    64.640] (II) event25 - CORSAIR CORSAIR K63 Wireless USB Receiver System Control: device is a keyboard
[    64.640] (II) event25 - CORSAIR CORSAIR K63 Wireless USB Receiver System Control: device removed
[    64.641] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.1/0003:1B1C:1B50.0002/input/input26/event25"
[    64.641] (II) XINPUT: Adding extended input device "CORSAIR CORSAIR K63 Wireless USB Receiver System Control" (type: KEYBOARD, id 13)
[    64.641] (**) Option "xkb_layout" "de"
[    64.642] (II) event25 - CORSAIR CORSAIR K63 Wireless USB Receiver System Control: is tagged by udev as: Keyboard
[    64.642] (II) event25 - CORSAIR CORSAIR K63 Wireless USB Receiver System Control: device is a keyboard
[    64.643] (II) config/udev: Adding input device Logitech G603 (/dev/input/event26)
[    64.643] (**) Logitech G603: Applying InputClass "libinput pointer catchall"
[    64.643] (**) Logitech G603: Applying InputClass "libinput keyboard catchall"
[    64.643] (**) Logitech G603: Applying InputClass "system-keyboard"
[    64.643] (II) Using input driver 'libinput' for 'Logitech G603'
[    64.644] (II) systemd-logind: got fd for /dev/input/event26 13:90 fd 28 paused 0
[    64.644] (**) Logitech G603: always reports core events
[    64.644] (**) Option "Device" "/dev/input/event26"
[    64.644] (**) Option "_source" "server/udev"
[    64.646] (II) event26 - Logitech G603: is tagged by udev as: Keyboard Mouse
[    64.646] (II) event26 - Logitech G603: device is a pointer
[    64.646] (II) event26 - Logitech G603: device is a keyboard
[    64.646] (II) event26 - Logitech G603: device removed
[    64.646] (II) libinput: Logitech G603: needs a virtual subdevice
[    64.646] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.2/1-4.1.2:1.2/0003:046D:C539.0005/0003:046D:406C.0007/input/input38/event26"
[    64.646] (II) XINPUT: Adding extended input device "Logitech G603" (type: MOUSE, id 14)
[    64.647] (**) Option "AccelerationScheme" "none"
[    64.647] (**) Logitech G603: (accel) selected scheme none/0
[    64.647] (**) Logitech G603: (accel) acceleration factor: 2.000
[    64.647] (**) Logitech G603: (accel) acceleration threshold: 4
[    64.648] (II) event26 - Logitech G603: is tagged by udev as: Keyboard Mouse
[    64.648] (II) event26 - Logitech G603: device is a pointer
[    64.648] (II) event26 - Logitech G603: device is a keyboard
[    64.649] (II) config/udev: Adding input device Logitech G603 (/dev/input/mouse2)
[    64.649] (**) Logitech G603: Applying InputClass "system-keyboard"
[    64.649] (II) No input driver specified, ignoring this device.
[    64.649] (II) This device may have been added with another device file.
[    64.650] (II) config/udev: Adding input device FiiO DigiHug USB Audio (/dev/input/event30)
[    64.650] (**) FiiO DigiHug USB Audio: Applying InputClass "libinput keyboard catchall"
[    64.650] (**) FiiO DigiHug USB Audio: Applying InputClass "system-keyboard"
[    64.650] (II) Using input driver 'libinput' for 'FiiO DigiHug USB Audio'
[    64.653] (II) systemd-logind: got fd for /dev/input/event30 13:94 fd 29 paused 0
[    64.653] (**) FiiO DigiHug USB Audio: always reports core events
[    64.653] (**) Option "Device" "/dev/input/event30"
[    64.653] (**) Option "_source" "server/udev"
[    64.655] (II) event30 - FiiO DigiHug USB Audio: is tagged by udev as: Keyboard
[    64.655] (II) event30 - FiiO DigiHug USB Audio: device is a keyboard
[    64.655] (II) event30 - FiiO DigiHug USB Audio: device removed
[    64.655] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.3/1-4.1.3:1.0/0003:1852:7022.0006/input/input32/event30"
[    64.655] (II) XINPUT: Adding extended input device "FiiO DigiHug USB Audio" (type: KEYBOARD, id 15)
[    64.655] (**) Option "xkb_layout" "de"
[    64.657] (II) event30 - FiiO DigiHug USB Audio: is tagged by udev as: Keyboard
[    64.657] (II) event30 - FiiO DigiHug USB Audio: device is a keyboard
[    64.657] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event8)
[    64.657] (II) No input driver specified, ignoring this device.
[    64.657] (II) This device may have been added with another device file.
[    64.658] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    64.658] (II) No input driver specified, ignoring this device.
[    64.658] (II) This device may have been added with another device file.
[    64.658] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event10)
[    64.658] (II) No input driver specified, ignoring this device.
[    64.658] (II) This device may have been added with another device file.
[    64.658] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[    64.658] (II) No input driver specified, ignoring this device.
[    64.658] (II) This device may have been added with another device file.
[    64.659] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[    64.659] (II) No input driver specified, ignoring this device.
[    64.659] (II) This device may have been added with another device file.
[    64.659] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[    64.659] (II) No input driver specified, ignoring this device.
[    64.659] (II) This device may have been added with another device file.
[    64.659] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[    64.659] (II) No input driver specified, ignoring this device.
[    64.659] (II) This device may have been added with another device file.
[    64.660] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event15)
[    64.660] (II) No input driver specified, ignoring this device.
[    64.660] (II) This device may have been added with another device file.
[    64.660] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event16)
[    64.660] (II) No input driver specified, ignoring this device.
[    64.660] (II) This device may have been added with another device file.
[    64.660] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[    64.660] (II) No input driver specified, ignoring this device.
[    64.660] (II) This device may have been added with another device file.
[    64.661] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[    64.661] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    64.661] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    64.661] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    64.662] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 30 paused 0
[    64.662] (**) AT Translated Set 2 keyboard: always reports core events
[    64.662] (**) Option "Device" "/dev/input/event4"
[    64.662] (**) Option "_source" "server/udev"
[    64.663] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    64.663] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    64.664] (II) event4  - AT Translated Set 2 keyboard: device removed
[    64.664] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[    64.664] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[    64.664] (**) Option "xkb_layout" "de"
[    64.665] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    64.665] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[    64.667] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[    64.667] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    64.667] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    64.669] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 31 paused 0
[    64.669] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    64.669] (**) Option "Device" "/dev/input/event17"
[    64.669] (**) Option "_source" "server/udev"
[    64.670] (II) event17 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    64.672] (II) event17 - SynPS/2 Synaptics TouchPad: device is a touchpad
[    64.672] (II) event17 - SynPS/2 Synaptics TouchPad: device removed
[    64.672] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event17"
[    64.672] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 17)
[    64.673] (**) Option "AccelerationScheme" "none"
[    64.673] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    64.673] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    64.673] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    64.674] (II) event17 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[    64.675] (II) event17 - SynPS/2 Synaptics TouchPad: device is a touchpad
[    64.676] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    64.676] (II) No input driver specified, ignoring this device.
[    64.676] (II) This device may have been added with another device file.
[    64.676] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event18)
[    64.676] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[    64.676] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[    64.677] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 32 paused 0
[    64.677] (**) TPPS/2 IBM TrackPoint: always reports core events
[    64.677] (**) Option "Device" "/dev/input/event18"
[    64.677] (**) Option "_source" "server/udev"
[    64.679] (II) event18 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[    64.679] (II) event18 - TPPS/2 IBM TrackPoint: device is a pointer
[    64.680] (II) event18 - TPPS/2 IBM TrackPoint: device removed
[    64.680] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input19/event18"
[    64.680] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 18)
[    64.680] (**) Option "AccelerationScheme" "none"
[    64.680] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[    64.680] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    64.680] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    64.681] (II) event18 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[    64.682] (II) event18 - TPPS/2 IBM TrackPoint: device is a pointer
[    64.683] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[    64.683] (II) No input driver specified, ignoring this device.
[    64.683] (II) This device may have been added with another device file.
[    64.684] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    64.684] (II) No input driver specified, ignoring this device.
[    64.684] (II) This device may have been added with another device file.
[    64.684] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[    64.684] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[    64.684] (**) ThinkPad Extra Buttons: Applying InputClass "system-keyboard"
[    64.684] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[    64.685] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 33 paused 0
[    64.685] (**) ThinkPad Extra Buttons: always reports core events
[    64.685] (**) Option "Device" "/dev/input/event6"
[    64.685] (**) Option "_source" "server/udev"
[    64.686] (II) event6  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[    64.686] (II) event6  - ThinkPad Extra Buttons: device is a keyboard
[    64.686] (II) event6  - ThinkPad Extra Buttons: device removed
[    64.686] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input8/event6"
[    64.686] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 19)
[    64.686] (**) Option "xkb_layout" "de"
[    64.687] (II) event6  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[    64.687] (II) event6  - ThinkPad Extra Buttons: device is a keyboard
[    64.704] (**) CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: Applying InputClass "libinput keyboard catchall"
[    64.704] (**) CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: Applying InputClass "system-keyboard"
[    64.704] (II) Using input driver 'libinput' for 'CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control'
[    64.704] (II) systemd-logind: returning pre-existing fd for /dev/input/event22 13:86
[    64.704] (**) CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: always reports core events
[    64.704] (**) Option "Device" "/dev/input/event22"
[    64.704] (**) Option "_source" "_driver/libinput"
[    64.704] (II) libinput: CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control: is a virtual subdevice
[    64.704] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.1/0003:1B1C:1B50.0002/input/input23/event22"
[    64.704] (II) XINPUT: Adding extended input device "CORSAIR CORSAIR K63 Wireless USB Receiver Consumer Control" (type: KEYBOARD, id 20)
[    64.704] (**) Option "xkb_layout" "de"
[    64.705] (**) Logitech G603: Applying InputClass "libinput pointer catchall"
[    64.705] (**) Logitech G603: Applying InputClass "libinput keyboard catchall"
[    64.705] (**) Logitech G603: Applying InputClass "system-keyboard"
[    64.705] (II) Using input driver 'libinput' for 'Logitech G603'
[    64.705] (II) systemd-logind: returning pre-existing fd for /dev/input/event26 13:90
[    64.705] (**) Logitech G603: always reports core events
[    64.705] (**) Option "Device" "/dev/input/event26"
[    64.705] (**) Option "_source" "_driver/libinput"
[    64.705] (II) libinput: Logitech G603: is a virtual subdevice
[    64.705] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1.2/1-4.1.2:1.2/0003:046D:C539.0005/0003:046D:406C.0007/input/input38/event26"
[    64.705] (II) XINPUT: Adding extended input device "Logitech G603" (type: KEYBOARD, id 21)
[    64.705] (**) Option "xkb_layout" "de"
[    65.260] (II) intel(0): EDID vendor "LGD", prod id 1313
[    65.260] (II) intel(0): Printing DDC gathered Modelines:
[    65.260] (II) intel(0): Modeline "1920x1080"x0.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[    65.260] (II) intel(0): Modeline "1920x1080"x0.0  110.92  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (53.3 kHz e)
[    65.273] (--) intel(0): HDMI max TMDS frequency 600000KHz
[    65.457] (II) event26 - Logitech G603: SYN_DROPPED event - some input events have been lost.
[    65.498] (II) intel(0): resizing framebuffer to 5760x2160
[    65.538] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    65.797] (II) intel(0): switch to mode 3840x2160@60.0 on DP2-1 using pipe 1, position (1920, 0), rotation normal, reflection none
[    67.588] (--) intel(0): HDMI max TMDS frequency 600000KHz
[    69.665] (II) intel(0): resizing framebuffer to 3840x2160
[    69.667] (II) intel(0): switch to mode 3840x2160@60.0 on DP2-1 using pipe 1, position (0, 0), rotation normal, reflection none
[    69.864] (--) intel(0): HDMI max TMDS frequency 600000KHz
[   176.677] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-408ms), your system is too slow
[   176.677] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-422ms), your system is too slow
[   179.828] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-437ms), your system is too slow
[   179.828] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-450ms), your system is too slow
[   188.010] (--) intel(0): HDMI max TMDS frequency 600000KHz
[   188.194] (II) event26 - Logitech G603: SYN_DROPPED event - some input events have been lost.
[   213.285] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-567ms), your system is too slow
[   213.285] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-580ms), your system is too slow
[   271.277] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-1266ms), your system is too slow
[   271.277] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-1279ms), your system is too slow
[   285.938] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-6ms), your system is too slow
[   321.803] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-5ms), your system is too slow
[   337.987] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-189ms), your system is too slow
[   337.987] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-202ms), your system is too slow
[   360.000] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-276ms), your system is too slow
[   360.000] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-289ms), your system is too slow
[   406.499] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-401ms), your system is too slow
[   406.499] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-414ms), your system is too slow
[   429.288] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-323ms), your system is too slow
[   429.288] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-336ms), your system is too slow
[   430.861] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-223ms), your system is too slow
[   430.861] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-236ms), your system is too slow
[   444.542] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-1311ms), your system is too slow
[   444.542] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-1324ms), your system is too slow
[   454.973] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-402ms), your system is too slow
[   454.973] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-415ms), your system is too slow
[   476.778] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-7ms), your system is too slow
[   476.779] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-20ms), your system is too slow
[   508.447] (II) event26 - Logitech G603: SYN_DROPPED event - some input events have been lost.
[   517.642] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-2300ms), your system is too slow
[   517.642] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-2313ms), your system is too slow
[   598.863] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-728ms), your system is too slow
[   598.863] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-741ms), your system is too slow
[   617.227] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-542ms), your system is too slow
[   617.227] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-556ms), your system is too slow
[   712.649] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-185ms), your system is too slow
[   712.650] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-198ms), your system is too slow
[   715.246] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-255ms), your system is too slow
[   715.247] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-268ms), your system is too slow
[   776.034] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-645ms), your system is too slow
[   776.034] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-659ms), your system is too slow
[   777.163] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-19ms), your system is too slow
[   777.163] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-32ms), your system is too slow
[   786.196] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-441ms), your system is too slow
[   786.196] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-455ms), your system is too slow
[   792.854] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-413ms), your system is too slow
[   792.854] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-426ms), your system is too slow
[   796.664] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-246ms), your system is too slow
[   796.665] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-260ms), your system is too slow
[   831.864] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-909ms), your system is too slow
[   831.864] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-922ms), your system is too slow
[   946.337] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-85ms), your system is too slow
[   946.337] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-99ms), your system is too slow
[   997.900] (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-808ms), your system is too slow
[   997.900] (EE) client bug: timer event26 debounce short: scheduled expiry is in the past (-821ms), your system is too slow

Offline

#14 01.03.2020 14:56:34

Brathorun
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Greg schrieb:

Das die HD520 eine ziemlich schlappe GPU ist, könnte dann das Problem bei 4K Monitoren schon sein.
Technische Daten:
https://www.intel.de/content/www/de/de/ … s-520.html

Aber dieses Urteil wäre auch sehr ... unschön. Denn mit Windows habe ich diese Performance-Probleme nicht...

Offline

#15 01.03.2020 15:33:09

Greg
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Brathorun schrieb:

...Aber dieses Urteil wäre auch sehr ... unschön. Denn mit Windows habe ich diese Performance-Probleme nicht...

Herrje ist das wieder ein Mist.
Wenn bei Windoof kein Problem macht, dann macht es bei Linux auch kein Problem.
Es gibt noch ein Kapitel wie das hier:
https://wiki.archlinux.org/index.php/Ha … celeration
Da deine CPU geprügelt wird, könnte es ja daran liegen, das der Hardware Videodekoder also die GPU garnicht benutzt wird. Und die GPU kann das wesentlich besser als die CPU.
https://www.archlinux.org/packages/comm … ia-driver/
Sieh mal in deinen Mediaplayer nach, ob man den dann auch noch umstellen muß.
Vielleicht noch erst mal ein Video runterladen, mit z.B. mpv einstellen und abspielen.
https://wiki.archlinux.de/title/Mpv
Wenn dann die 4k Videos mit 60hz abgespielt werden ist die Erste Hürde geschafft.
Wie man den Internetbrowser damit auch noch umbiegen kann, weiß ich nicht.

Deine xorg.log ist was den Grafiktreiber betrifft nichts Negatives drin.

Dein event26:
64.646] (II) event26 - Logitech G603: is tagged by udev as: Keyboard Mouse
Deine Logitech Ratte, warum da was zu langsam ist, keine Ahnung. (EE) client bug: timer event26 debounce: scheduled expiry is in the past (-402ms), your system is too slow
Vielleicht, du machst was mit der Ratte (Tastendruck, am Rad drehen) und die Aktion kann erst nach 402ms ausgeführt werden.
Viel Glück!!

Beitrag geändert von Greg (01.03.2020 15:43:29)

Offline

#16 01.03.2020 16:37:08

Brathorun
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

So... hab jetzt Installiert/Aktiviert:

[xf86-video-intel] - keine Verbesserung erkennbar.

4k Videos wird nicht mit 60 FPS abgespielt

[intel-media-driver] und [libva-intel-driver] - 4k läuft mit 60 FPS ab CPU Last in Spitze bei 50%

[libva-vdpau-driver] - deutlich angenehmeres surfen unter Chromium im Vergleich zu Firefox

100% zufrieden bin ich nicht. Aber gut, kann jetzt damit leben.

Offline

#17 02.03.2020 13:05:32

niemand
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

OT: könntest du so Ausgaben bitte in code-Tags, statt in quote-Tags stellen? Dann würd’s nicht in meterlangen Threads ausarten smile

Offline

#18 04.03.2020 20:44:54

MarkusK
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Kann es eventuell am Wayland-Grafiktreiber liegen, den Gnome ja mitbringt? Wie sieht es unter beispielsweise xfce aus?

Offline

#19 11.03.2020 16:33:42

Brathorun
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Servus, nach etwas längerer Zeit...

Via try and error hab ich diverse Pakete ausprobiert und folgende sind auf meinem System:
intel-gmmlib
intel-media-driver
intel-tbb
intel-ucode
libva
libva-intel-driver
libva-utils
libva-vdpau-driver
libvdpau

Welche davon jetzt nötig sind oder zur Lösung des Problems beitragen, kann ich natürlich leider nicht 100% sagen. Die deutlichste Verbesserung trat nach der Installation des Pakets "libva-vdpau-driver" ein. Hiernach kann ich ein 4k Video ruckefrei abspielen.
Beim 4k Video steigt die CPU-Last nicht über 25%. Auf dem Desktop funktioniert auch alles gut und ohne ruckler.

Nur der verdammte Browser macht ärger. Scrollen ruckelt. Videos werden abgespielt - ruckelfrei - jedoch steigt die CPU-Last immer noch zeitweise auf bis zu 80% an.

Hier noch einmal einige Infos, mit denen Ihr hoffentlich etwas anfangen könnt:

$ xrandr
Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767
eDP1 connected (normal left inverted right x axis y axis)
   1920x1080     60.02 +  59.93    48.00  
   1680x1050     59.88  
   1400x1050     59.98  
   1600x900      60.00    59.95    59.82  
   1280x1024     60.02  
   1400x900      59.96    59.88  
   1280x960      60.00  
   1368x768      60.00    59.88    59.85  
   1280x800      59.81    59.91  
   1280x720      59.86    60.00    59.74  
   1024x768      60.00  
   1024x576      60.00    59.90    59.82  
   960x540       60.00    59.63    59.82  
   800x600       60.32    56.25  
   864x486       60.00    59.92    59.57  
   640x480       59.94  
   720x405       59.51    60.00    58.99  
   640x360       59.84    59.32    60.00  
DP1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP2-1 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 940mm x 530mm
   3840x2160     60.00*+  60.00    50.00    59.94    30.00  
   1920x2160     59.99  
   2560x1440     59.95  
   1920x1080     60.00    50.00    59.94  
   1680x1050     59.95  
   1280x1024     60.02  
   1440x900      59.89  
   1280x960      60.00  
   1280x720      60.00    50.00    59.94  
   1024x768      60.00  
   800x600       60.32    56.25  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       60.00    59.94  
DP2-2 disconnected (normal left inverted right x axis y axis)
DP2-3 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
$ lspci -v
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
	Subsystem: Lenovo Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers
	Flags: bus master, fast devsel, latency 0
	Capabilities: <access denied>
	Kernel driver in use: skl_uncore

00:02.0 VGA compatible controller: Intel Corporation Skylake GT2 [HD Graphics 520] (rev 07) (prog-if 00 [VGA controller])
	Subsystem: Lenovo Skylake GT2 [HD Graphics 520]
	Flags: bus master, fast devsel, latency 0, IRQ 124
	Memory at f0000000 (64-bit, non-prefetchable) [size=16M]
	Memory at e0000000 (64-bit, prefetchable) [size=256M]
	I/O ports at e000 [size=64]
	Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21) (prog-if 30 [XHCI])
	Subsystem: Lenovo Sunrise Point-LP USB 3.0 xHCI Controller
	Flags: bus master, medium devsel, latency 0, IRQ 126
	Memory at f1220000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
	Subsystem: Lenovo Sunrise Point-LP Thermal subsystem
	Flags: fast devsel, IRQ 18
	Memory at f124a000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel_pch_thermal
	Kernel modules: intel_pch_thermal

00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
	Subsystem: Lenovo Sunrise Point-LP CSME HECI
	Flags: bus master, fast devsel, latency 0, IRQ 128
	Memory at f124b000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:16.3 Serial controller: Intel Corporation Sunrise Point-LP Active Management Technology - SOL (rev 21) (prog-if 02 [16550])
	Subsystem: Lenovo Sunrise Point-LP Active Management Technology - SOL
	Flags: 66MHz, fast devsel, IRQ 19
	I/O ports at e080 [size=8]
	Memory at f124f000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: serial

00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21) (prog-if 01 [AHCI 1.0])
	Subsystem: Lenovo Sunrise Point-LP SATA Controller [AHCI mode]
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 127
	Memory at f1248000 (32-bit, non-prefetchable) [size=8K]
	Memory at f124e000 (32-bit, non-prefetchable) [size=256]
	I/O ports at e088 [size=8]
	I/O ports at e090 [size=4]
	I/O ports at e060 [size=32]
	Memory at f124c000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 122
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: [disabled]
	Memory behind bridge: f1100000-f11fffff [size=1M]
	Prefetchable memory behind bridge: [disabled]
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #3 (rev f1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0, IRQ 123
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: [disabled]
	Memory behind bridge: f1000000-f10fffff [size=1M]
	Prefetchable memory behind bridge: [disabled]
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
	Subsystem: Lenovo Sunrise Point-LP LPC Controller
	Flags: bus master, medium devsel, latency 0

00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
	Subsystem: Lenovo Sunrise Point-LP PMC
	Flags: fast devsel
	Memory at f1244000 (32-bit, non-prefetchable) [disabled] [size=16K]

00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
	Subsystem: Lenovo Sunrise Point-LP HD Audio
	Flags: bus master, fast devsel, latency 64, IRQ 131
	Memory at f1240000 (64-bit, non-prefetchable) [size=16K]
	Memory at f1230000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel, snd_soc_skl

00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
	Subsystem: Lenovo Sunrise Point-LP SMBus
	Flags: medium devsel, IRQ 16
	Memory at f124d000 (64-bit, non-prefetchable) [size=256]
	I/O ports at efa0 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection I219-LM (rev 21)
	Subsystem: Lenovo Ethernet Connection I219-LM
	Flags: bus master, fast devsel, latency 0, IRQ 129
	Memory at f1200000 (32-bit, non-prefetchable) [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: e1000e
	Kernel modules: e1000e

02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS522A PCI Express Card Reader (rev 01)
	Subsystem: Lenovo RTS522A PCI Express Card Reader
	Flags: bus master, fast devsel, latency 0, IRQ 125
	Memory at f1100000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: rtsx_pci
	Kernel modules: rtsx_pci

04:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)
	Subsystem: Intel Corporation Wireless 8260
	Flags: bus master, fast devsel, latency 0, IRQ 130
	Memory at f1000000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi
	Kernel modules: iwlwifi
$ glxinfo | grep OpenGL
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) HD Graphics 520 (Skylake GT2) 
OpenGL core profile version string: 4.6 (Core Profile) Mesa 19.3.4
OpenGL core profile shading language version string: 4.60
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 19.3.4
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.2 Mesa 19.3.4
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
OpenGL ES profile extensions:

Mit Xfce ist das Problem übrigens nicht behoben - ist eher schlimmer geworden, was aber wohl auch an meinen fehlenden Kentnissen liegen mag. Xfce(goodies) selbst kommt ja nochmal sehr minimalistisch daher währen Gnome sehr "komplett" zu sein scheint...

Unter Gnome sehe ich zwischen Wayland und Xorg keine Unterschiede.

Beitrag geändert von Brathorun (11.03.2020 16:36:20)

Offline

#20 11.03.2020 17:45:41

brikler
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Brathorun schrieb:

Nur der verdammte Browser macht ärger. Scrollen ruckelt. Videos werden abgespielt - ruckelfrei - jedoch steigt die CPU-Last immer noch zeitweise auf bis zu 80% an.

zum video schaun, benutze ich die kombination aus mpv + youtube-dl und mit hardware unterstützung rückelt selbst bei meinem alten intel core2 nichts.

#mpv + youtube-dl
mpv --vo=gpu --hwdec=auto --profile=gpu-hq <adresseZumVideo>

https://mpv.io/manual/stable/

Offline

#21 11.03.2020 18:35:25

Brathorun
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Wenn ich also ein Video anschauen möchte, führt mein Weg über den Browser - in die Konsole/mpv? Etwas umständlich?!

Gibt es eine Möglichkeit, den Browser bei Netflix und Prime zu umgehen - unter Linux?

Ansonsten ist es noch immer schwer zu glauben, das unter Windows alles läuft wie es laufen soll und unter Linux eben nicht...

Offline

#22 11.03.2020 19:26:49

brikler
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Brathorun schrieb:

Wenn ich also ein Video anschauen möchte, führt mein Weg über den Browser - in die Konsole/mpv? Etwas umständlich?!

Gibt es eine Möglichkeit, den Browser bei Netflix und Prime zu umgehen - unter Linux?

ich finds nicht umständlich (dank strg+l strg+c alt+tap strg+shift+v) eine konsole hab ich eh immer auf und die url ist schnell kopiert und eingefügt…
ob es mit netflix oder prime funktioniert weiß ich nicht, müsstest hald ausprobieren.

mpv kann man (angeblich) auch in den FF einbetten https://wiki.archlinux.org/index.php/Mp … ser_plugin

ich würde beim ff auch mal schaun was mit mp4 und h264 zui tun hat und gegebenenfalls einschalten

media.mediasource.mp4.enabled;true
media.mp4.enabled;true
media.navigator.mediadatadecoder_h264_enabled;true

Offline

#23 11.03.2020 21:02:58

Brathorun
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

Okay, danke für den Tipp!
Werde mpv ab jetzt definitiv regelmäßig nutzen!

Mit mpv bleibt die CPU unter 50%.
In Netflix im Firefox ist die CPU-Last ebenfalls unter 50%!

Bei den Livestreams (ARD, ZDF, ARTE) muss ich das ganze nochmal beobachten. Aber auch hier vorerst selbes Bild: im Browser 90% - MPV 50%

Offline

#24 11.03.2020 21:17:53

brikler
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

wo kontrollierst du die cpu last? blos bei den graphen oder in der prozesstabelle? 50% erscheint mir für den prozess ein bissl hoch.

dbei einer intel graka, kannst du vaapi nutzen, libva-vdpau-driverund libvdpau  solltest du eigentlich nicht brauchen

mpv --vo=gpu --hwdec=vaapi --profile=gpu-hq <adresseZumVideo>

du kannst auch einiges in threads "auslagern", das sollte auch noch mal leistung sparen

--vd-lavc-threads=<N>
    Number of threads to use for decoding. Whether threading is actually supported depends on codec (default: 0). 0 means autodetect number of cores on the machine and use that, up to the maximum of 16. You can set more than 16 threads manually.
--ad-lavc-threads=<0-16>
    Number of threads to use for decoding. Whether threading is actually supported depends on codec. As of this writing, it's supported for some lossless codecs only. 0 means autodetect number of cores on the machine and use that, up to the maximum of 16 (default: 1).

Offline

#25 11.03.2020 22:29:19

Brathorun
Mitglied

Re: Leichteste GUI für ThinkPad und 4k Monitor?

brikler schrieb:

wo kontrollierst du die cpu last? blos bei den graphen oder in der prozesstabelle? 50% erscheint mir für den prozess ein bissl hoch.

Mit htop. 50 % sind Spitzen(gesamt-)werte auf einem CPU-Kern - meist bleibt es bei unter 30% (man kann doch sicher einen Zeitraum aufzeichnen und einen Durchschnittswert ermitteln?! Wie funktioniert das?)

Bin aber offengestanden etwas überrumpelt, das die Browser so viel Leistung ziehen (Chromium kann ich beispielsweise überhaupt nicht nutzen - zumindest nicht, ohne wieder etwas spezielles einzustellen).

Man kann damit arbeiten, so wie es jetzt ist. Schmecken tuts mir aber nicht...

Beitrag geändert von Brathorun (11.03.2020 22:31:35)

Offline

Schnellantwort auf dieses Thema

Schreibe deinen Beitrag und versende ihn
Deine Antwort

Fußzeile des Forums