Hi,
Edward d'Eath schriebIst der Monitor (LG Flatron L1710S) ein CRT- oder TFT-Monitor?
also der LG Monitor ist ein 17" TFT der über VGA angeschlossen ist.
Edward d'Eath schriebLief X vor der Installation von FluxBox korrekt?
Der XServer läuft wie gesagt mit der Modeline Zeile in der korrekten Auflösung, ansonsten läuft der XServer zwar, allerdings mit der niedrigeren Auflösung die auch in der Konsole genutzt wird seit das "vga=" aus der Grub Config weg ist.
Edward d'Eath schriebWie werden X und FluxBox gestartet?
Gestartet wird Fluxbox über ~/.xinitrc. X Starte ich momentan noch per Hand indem ich startx nach dem Login eingebe. Einen grafischen Loginmanager habe ich noch nicht installiert.
Meine ~/.xinitrc: (entspricht auch der Ausgabe von cat ~/.xinitrc)
exec startfluxbox
Die Ausgabe der Befehel die du vorgeschlagen hast:
grep -e WW -e EE /var/log/Xorg.0.log
[ 427.827] Current Operating System: Linux HomeSock 2.6.37-ARCH #1 SMP PREEMPT Fri Feb 18 16:58:42 UTC 2011 i686 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 427.837] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 427.837] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 427.840] (II) Loading extension MIT-SCREEN-SAVER
lspci -nnk | grep -i vga -A2
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV11 [GeForce2 MX/MX 400] [10de:0110] (rev a1)
Subsystem: Guillemot Corporation Device [14af:7101]
Kernel driver in use: nouveau
lsmod | grep -i nouveau
nouveau 498133 1
ttm 44512 1 nouveau
drm_kms_helper 23703 1 nouveau
drm 141488 3 nouveau, ttm, drm_kms_helper
i2c_algo_bit 4191 1 nouveau
i2c_core 16029 5 i2c_viapro, nouveau, drm_kms_helper, drm, i2c_algo_bit
video 10367 1 nouveau
button 3881 1 nouveau
lsmod | grep -i nvidia
(Gibt keine Ausgabe)
dmesg | grep -i nouveau
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x011000a1)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:01:00.0: ... appears to be valid
[drm] nouveau 0000:01:00.0: BMP BIOS found
[drm] nouveau 0000:01:00.0: BMP version 5.16
[drm] nouveau 0000:01:00.0: Bios version 03.11.00.08
[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 1.1
[drm] nouveau 0000:01:00.0: No useful information in BIOS output table; adding all possible outputs
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x0780
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x0E0A
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x079B
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x0DB1
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x0821
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0x091E
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0x084F
[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0x08B9
[drm] nouveau 0000:01:00.0: 0 available performance level(s)
[drm] nouveau 0000:01:00.0: c: memory 182MHz core 174MHz
[drm] nouveau 0000:01:00.0: Detected 32MiB VRAM
[drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[drm] nouveau 0000:01:00.0: Saving VGA fonts
[drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
nouveau 0000:01:00.0: VGA-1: EDID block 0 invalid.
[drm] nouveau 0000:01:00.0: DDC responded, but no EDID for VGA-1
[drm] nouveau 0000:01:00.0: Load detected on head A
[drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x48000, bo f5ba3200
[drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
Modules linked in: ipv6 ext2 snd_seq_dummy snd_seq_oss snd_seq_midi_event usb_storage snd_seq snd_pcm_oss joydev snd_mixer_oss hid_logitech ff_memless snd_cmipci usbhid gameport hid snd_pcm snd_page_alloc snd_opl3_lib snd_timer snd_hwdep snd_mpu401_uart i2c_viapro ppdev via_ircc parport_pc snd_rawmidi snd_seq_device firewire_ohci shpchp lp processor uhci_hcd floppy evdev irda snd pci_hotplug tulip pcspkr parport serio_raw ehci_hcd firewire_core sg soundcore crc_ccitt via_agp crc_itu_t ndiswrapper usbcore ext3 jbd mbcache sr_mod sd_mod cdrom pata_via pata_acpi libata scsi_mod nouveau ttm drm_kms_helper drm agpgart i2c_algo_bit i2c_core video output button
dmesg | grep -i nvidia
(Gibt keine Ausgabe)
Die Wikis habe ich zu Rate gezogen. Inzwischen habe ich es geschafft wenn ich startx eingebe das Fluxbox auch startet. Zwar sehe ich eine Menge Fehlermeldungen von Fluxbox, aber das liegt wahrscheinlich daran das ich außer
pacman -S fluxbox
nichts getan habe und keine Einstellungen in der Config gemacht habe. Ich würde ja gerne die Fehlermeldungen hier posten, aber ich weiß leider nicht wie ich diese in eine Datei umleiten kann oder in welcher Log Datei diese abgelegt werden (falls sie geloggt werden).
Das System ist auf dem aktuellen Stand:
pacman -Syu
:: Synchronisiere Paketdatenbanken...
core ist aktuell
extra ist aktuell
community ist aktuell
:: Starte komplette Systemaktualisierung...
Es gibt nichts zu tun
Da Fluxbox inzwischen startet würde es mich hauptsächlich interessieren warum das Kernel-Mode-Setting bei mir nicht korrekt funktioniert. Der Workaround mit der Modeline Zeile gefällt mir persönlich nicht so wirklich.
Nachtrag:
Den Fehlermeldungen kann ich soweit entnehmen das wie ich vermutet hab die EDID Meldunge des Monitors nicht gelesen werden kann oder überhaupt keine kommt.