Hallo,
ich habe ein Dell XPS15 Notebook mit Intel Prozessor, der sich auch um die Grafik kümmert. Zum Arbeiten hänge ich ihn per HDMI (was anscheinend intern zu DP wird) an einen 4k-Monitor. Das funktioniert auch ohne Probleme, wenn ich nur eine 1920x1080 Auflösung nutze. Stelle ich sie aber per xrandr auf die default Auflösung von 3840x2160 wird der Bildschirm schwarz und der Monitor erkennt kein Signal mehr. Die xrandr-Ausgabe sieht dann so aus:
Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767
eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 340mm x 190mm
1920x1080 60.00*+ 59.93
1680x1050 59.88
1400x1050 59.98
1600x900 60.00 59.95 59.82
1280x1024 60.02
1400x900 59.96 59.88
1280x960 60.00
1368x768 60.00 59.88 59.85
1280x800 59.81 59.91
1280x720 59.86 60.00 59.74
1024x768 60.00
1024x576 60.00 59.90 59.82
960x540 60.00 59.63 59.82
800x600 60.32 56.25
864x486 60.00 59.92 59.57
640x480 59.94
720x405 59.51 60.00 58.99
640x360 59.84 59.32 60.00
DP1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 700mm x 390mm
3840x2160 60.00*+ 60.00 50.00 59.94 30.00 25.00 24.00 29.97 23.98
2560x1600 59.94
2560x1440 59.95
1920x1080 60.00 60.00 50.00 59.94 30.00 25.00 24.00 29.97 23.98
1920x1080i 60.00 50.00 59.94
1680x1050 59.88
1600x900 60.00
1280x1024 75.02 60.02
1280x800 59.91
1152x864 75.00
1280x720 60.00 50.00 59.94
1024x768 75.03 60.00
832x624 74.55
800x600 75.00 60.32
720x576 50.00
720x480 60.00 59.94
640x480 75.00 60.00 59.94
720x400 70.08
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Hat da jemand eine Idee, woran das liegen könnte? Generell funktioniert das Setup, nur derzeit unter Arch nicht.