oha, sehr kompliziert ... du scheinst da mehr ahnung von zu haben ...
der openvpn server rennt auf der fritzbox ( freetz ). die clients sind alle linux rechner und nein, keine firewall an. habe zwar auf der fritzbox iptables installiert aber keine regeln gesetzt. iptable --list, zeigt nix an.
ich habe auch keine bridge-config installiert auch wenn das freetz-frontend es zu läßt. hatte das auch mal probiert, macht leider keinen unterschied, also bei mir ...
ich kann dir diesen link geben:
https://freetz.github.io/wiki/packages/openvpn
so habe ich das gemacht, vielleicht ist es mit screenshots besser. ich habe die tap variante genutzt.
und ich weiß nicht ob es wichtig ist... habe den server als UPD eingerichtet. so weit ich das gelesen habe, wäre das nicht weiter schlimm. hatte ihn aber auch mal als TCP laufen, machte aber auch keinen unterschied.
ip a
root@fritz:/var/mod/root# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: tunl0: <NOARP> mtu 1480 qdisc noop
link/ipip 0.0.0.0 brd 0.0.0.0
3: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
4: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP300> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 34:31:c4:e7:e8:27 brd ff:ff:ff:ff:ff:ff
5: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP200> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 34:31:c4:e7:e8:29 brd ff:ff:ff:ff:ff:ff
6: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP200> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 34:31:c4:e7:e8:2f brd ff:ff:ff:ff:ff:ff
7: eth3: <NO-CARRIER,BROADCAST,MULTICAST,UP200> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 34:31:c4:e7:e8:30 brd ff:ff:ff:ff:ff:ff
8: ptm_vr9: <BROADCAST,MULTICAST,UP,LOWER_UP100> mtu 1500 qdisc tbf qlen 1000
link/ether 34:31:c4:e7:e8:2d brd ff:ff:ff:ff:ff:ff
9: adsl: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 2000 qdisc pfifo_fast qlen 32
link/[19]
10: lan: <BROADCAST,MULTICAST,UP,LOWER_UP200> mtu 1500 qdisc noqueue
link/ether 34:31:c4:e7:e8:27 brd ff:ff:ff:ff:ff:ff
inet 192.168.10.1/24 brd 192.168.10.255 scope global lan
inet 169.254.1.1/16 brd 169.254.255.255 scope global lan:0
inet6 fe80::3631:c4ff:fee7:e827/64 scope link
valid_lft forever preferred_lft forever
11: guest: <BROADCAST,MULTICAST,UP,LOWER_UP200> mtu 1500 qdisc noqueue
link/ether 34:31:c4:e7:e8:27 brd ff:ff:ff:ff:ff:ff
inet 192.168.181.1/24 brd 192.168.181.255 scope global guest
inet6 fe80::3631:c4ff:fee7:e827/64 scope link
valid_lft forever preferred_lft forever
12: dsl: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP200> mtu 1500 qdisc pfifo_fast qlen 100
link/ppp
inet 192.168.10.1/32 scope global dsl
13: wifi0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 511
link/ieee802.11 34:31:c4:e7:e8:2b brd ff:ff:ff:ff:ff:ff
14: ath0: <BROADCAST,UP,LOWER_UP200> mtu 1500 qdisc noqueue
link/ether 34:31:c4:e7:e8:2b brd ff:ff:ff:ff:ff:ff
48: tap1: <BROADCAST,MULTICAST,UP,LOWER_UP200> mtu 1500 qdisc pfifo_fast qlen 100
link/ether 32:a2:1e:b1:d3:33 brd ff:ff:ff:ff:ff:ff
inet 192.168.11.1/24 brd 192.168.11.255 scope global tap1
root@fritz:/var/mod/root#
ip r
root@fritz:/var/mod/root# ip r
8.8.4.4 dev dsl metric 2
185.55.75.158 dev dsl metric 2
192.168.180.1 dev dsl scope link metric 2
192.168.180.2 dev dsl scope link metric 2
8.8.8.8 dev dsl metric 2
192.168.181.0/24 dev guest scope link src 192.168.181.1
192.168.11.0/24 dev tap1 scope link src 192.168.11.1
192.168.10.0/24 dev lan scope link src 192.168.10.1
169.254.0.0/16 dev lan scope link src 169.254.1.1
default dev dsl scope link metric 2
root@fritz:/var/mod/root#