Tag zusammen,
ich habe Probleme meinen W-Lan/ Bluetooth (Broadcom BCM43228 802.11 a/b/g/n) Adapter zum laufen zu bekommen. Bei einer nackten Arch Installation bekomme ich beim starten folgende Fehler:
b43-phy ERROR: Firmware file "b43/ucode30_mimo.fw" not found
b43-phy ERROR: Firmware file b43-open/ucode30_mimo.fw not found
Daraufhin hatte ich über aur b43-firmware installiert und als Abhängigkeit installeirt mir aur noch b43-fwcutter. Neustart, jetzt läuft die Hardware an sich, jedoch braucht er eine gefühlte Ewigkeit um den Network Manager zu starten. In der dmesg finde ich folgendes:
[ 4.929831] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 4.930043] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21f1.hcd failed with error -2
Am Ende meines Beitrags findet ihr noch meine komplette dmesg. Die fehlende Datei hatte ich mal von
https://github.com/winterheart/broadcom-bt-firmware/blob/master/brcm/BCM20702A1-0a5c-21f1.hcd heruntergeladen und manuell in
/lib/firmware/brcm
reinkopiert. Auch dies ohne Erfolg. Laut der Webseite des b43-Projektes
http://linuxwireless.sipsolutions.net/en/users/Drivers/b43/ wird meine Karte komplett unterstützt.
Weiß von euch eienr vll. was?
Schönen Gruß und Danke
Hier meine komplette dmesg:
[ 0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21
[ 0.000000] Linux version 4.16.8-1-ARCH (builduser@heftig-7043) (gcc version 8.1.0 (GCC)) #1 SMP PREEMPT Wed May 9 11:25:02 UTC 2018
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=LABEL=p_arch rw
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000097fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000098000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009cb7efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009cb7f000-0x000000009de7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009de7f000-0x000000009df7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009df7f000-0x000000009dffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009dfff000-0x000000009dffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff810000-0x00000000ff82efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x91b7e018-0x91b8e057] usable ==> usable
[ 0.000000] e820: update [mem 0x91b7e018-0x91b8e057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000097fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000098000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000091b7e017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000091b7e018-0x0000000091b8e057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000091b8e058-0x000000009cb7efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009cb7f000-0x000000009de7efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009de7f000-0x000000009df7efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009df7f000-0x000000009dffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009dfff000-0x000000009dffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff810000-0x00000000ff82efff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000043fdfffff] usable
[ 0.000000] efi: EFI v2.10 by HPQ
[ 0.000000] efi: ACPI=0x9dffe000 ACPI 2.0=0x9dffe014 SMBIOS=0x9d32e198
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP ProBook 640 G1/1993, BIOS L77 Ver. 01.20 07/17/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x43fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect
[ 0.000000] 1 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 2 base 0080000000 mask 7FE0000000 write-back
[ 0.000000] 3 base 009F000000 mask 7FFF000000 uncachable
[ 0.000000] 4 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 5 base 0200000000 mask 7E00000000 write-back
[ 0.000000] 6 base 0400000000 mask 7FC0000000 write-back
[ 0.000000] 7 base 043FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 77000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x20c655000, 0x20c655fff] PGTABLE
[ 0.000000] BRK [0x20c656000, 0x20c656fff] PGTABLE
[ 0.000000] BRK [0x20c657000, 0x20c657fff] PGTABLE
[ 0.000000] BRK [0x20c658000, 0x20c658fff] PGTABLE
[ 0.000000] BRK [0x20c659000, 0x20c659fff] PGTABLE
[ 0.000000] BRK [0x20c65a000, 0x20c65afff] PGTABLE
[ 0.000000] BRK [0x20c65b000, 0x20c65bfff] PGTABLE
[ 0.000000] BRK [0x20c65c000, 0x20c65cfff] PGTABLE
[ 0.000000] Secure boot disabled
[ 0.000000] RAMDISK: [mem 0x7f70e000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009DFFE014 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x000000009DFFE120 0000A4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000009DFFC000 00010C (v05 HPQOEM 1993 00000001 HP 00000001)
[ 0.000000] ACPI: DSDT 0x000000009DFD2000 024BB9 (v02 HPQOEM 1993 00000001 INTL 20110112)
[ 0.000000] ACPI: FACS 0x000000009DE31000 000040
[ 0.000000] ACPI: FACS 0x000000009DE31000 000040
[ 0.000000] ACPI: HPET 0x000000009DFFB000 000038 (v01 HPQOEM 1993 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 0x000000009DFFA000 0000BC (v01 HPQOEM 1993 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0x000000009DFF9000 00003C (v01 HPQOEM 1993 00000001 HP 00000001)
[ 0.000000] ACPI: ASF! 0x000000009DFF8000 0000A5 (v32 HPQOEM 1993 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 0x000000009DFF7000 000032 (v02 HPQOEM 1993 00000000 HP 00000001)
[ 0.000000] ACPI: SSDT 0x000000009DFCF000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0x000000009DFCE000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[ 0.000000] ACPI: SLIC 0x000000009DFCD000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: MSDM 0x000000009DFCC000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP 00000001)
[ 0.000000] ACPI: FPDT 0x000000009DFCB000 000044 (v01 HPQOEM 1993 00000001 HP 00000001)
[ 0.000000] ACPI: BGRT 0x000000009DFCA000 000038 (v00 HPQOEM 1993 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 0x000000009DFC6000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0x000000009DFC5000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0x000000009DFC4000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0x000000009DFC3000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x43fdfc000-0x43fdfffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x0000000000097fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009cb7efff]
[ 0.000000] node 0: [mem 0x000000009dfff000-0x000000009dffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fdfffff]
[ 0.000000] On node 0 totalpages: 4049174
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 1072 pages reserved
[ 0.000000] DMA zone: 3990 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9966 pages used for memmap
[ 0.000000] DMA32 zone: 637824 pages, LIFO batch:31
[ 0.000000] Normal zone: 53240 pages used for memmap
[ 0.000000] Normal zone: 3407360 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 100 pages
[ 0.000000] Reserving Intel graphics memory at [mem 0x9f200000-0xbf1fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x91b7e000-0x91b7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x91b8e000-0x91b8efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cb7f000-0x9de7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9de7f000-0x9df7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9df7f000-0x9dffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9f1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f200000-0xbf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xe00f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff80ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff810000-0xff82efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff82f000-0xffffffff]
[ 0.000000] e820: [mem 0xbf200000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x4da with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3984832
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=LABEL=p_arch rw
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 15749096K/16196696K available (10252K kernel code, 1262K rwdata, 3404K rodata, 1460K init, 640K bss, 447600K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 31738 entries in 124 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: .
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180105
[ 0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.016666] tsc: Fast TSC calibration using PIT
[ 0.019999] tsc: Detected 2494.312 MHz processor
[ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f43ca33b3, max_idle_ns: 440795321532 ns
[ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.48 BogoMIPS (lpj=8314373)
[ 0.019999] pid_max: default: 32768 minimum: 301
[ 0.029128] Security Framework initialized
[ 0.029130] Yama: becoming mindful.
[ 0.031424] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.032593] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.032642] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.032679] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.032875] CPU: Physical Processor ID: 0
[ 0.032875] CPU: Processor Core ID: 0
[ 0.032881] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.032881] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.032885] mce: CPU supports 7 MCE banks
[ 0.032894] CPU0: Thermal monitoring enabled (TM1)
[ 0.032904] process: using mwait in idle threads
[ 0.032907] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.032908] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.032909] Spectre V2 : Mitigation: Full generic retpoline
[ 0.032910] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.032910] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.033120] Freeing SMP alternatives memory: 24K
[ 0.039016] TSC deadline timer enabled
[ 0.039019] smpboot: CPU0: Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.050007] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.050042] ... version: 3
[ 0.050042] ... bit width: 48
[ 0.050043] ... generic registers: 4
[ 0.050044] ... value mask: 0000ffffffffffff
[ 0.050044] ... max period: 00007fffffffffff
[ 0.050045] ... fixed-purpose events: 3
[ 0.050046] ... event mask: 000000070000000f
[ 0.056669] Hierarchical SRCU implementation.
[ 0.076904] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.083336] smp: Bringing up secondary CPUs ...
[ 0.113345] x86: Booting SMP configuration:
[ 0.113346] .... node #0, CPUs: #1 #2 #3
[ 0.173648] smp: Brought up 1 node, 4 CPUs
[ 0.173648] smpboot: Max logical packages: 2
[ 0.173648] smpboot: Total of 4 processors activated (19962.93 BogoMIPS)
[ 0.177067] devtmpfs: initialized
[ 0.177067] x86/mm: Memory block size: 128MB
[ 0.177757] PM: Registering ACPI NVS region [mem 0x9de7f000-0x9df7efff] (1048576 bytes)
[ 0.177757] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.177757] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.177757] pinctrl core: initialized pinctrl subsystem
[ 0.177757] RTC time: 10:59:40, date: 05/16/18
[ 0.177757] NET: Registered protocol family 16
[ 0.177757] cpuidle: using governor ladder
[ 0.183343] cpuidle: using governor menu
[ 0.183371] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.183372] ACPI: bus type PCI registered
[ 0.183373] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.183437] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.183442] PCI: not using MMCONFIG
[ 0.183442] PCI: Using configuration type 1 for base access
[ 0.183445] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.184243] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.184243] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.184243] ACPI: Added _OSI(Module Device)
[ 0.184243] ACPI: Added _OSI(Processor Device)
[ 0.184243] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.184243] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.195232] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.202768] ACPI: Dynamic OEM Table Load:
[ 0.202776] ACPI: SSDT 0xFFFF89A46DADB800 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
[ 0.203306] ACPI: Dynamic OEM Table Load:
[ 0.203312] ACPI: SSDT 0xFFFF89A46D8A5800 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
[ 0.203882] ACPI: Dynamic OEM Table Load:
[ 0.203887] ACPI: SSDT 0xFFFF89A46DAB4600 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
[ 0.205051] ACPI: EC: EC started
[ 0.205052] ACPI: EC: interrupt blocked
[ 1.693733] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 1.693736] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.693737] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 1.693738] ACPI: Interpreter enabled
[ 1.693764] ACPI: (supports S0 S3 S4 S5)
[ 1.693766] ACPI: Using IOAPIC for interrupt routing
[ 1.693789] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.694254] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.694267] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.694574] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 1.696623] ACPI: Power Resource [APPR] (off)
[ 1.699875] ACPI: Power Resource [COMP] (off)
[ 1.700540] ACPI: Power Resource [LPP] (on)
[ 1.704934] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.704939] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.707323] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 1.707324] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 1.708012] PCI host bridge to bus 0000:00
[ 1.708015] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 1.708016] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 1.708017] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 1.708019] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window]
[ 1.708020] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
[ 1.708021] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window]
[ 1.708022] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[ 1.708024] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 1.708032] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 1.708169] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 1.708180] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[ 1.708185] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.708189] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 1.708205] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 1.708338] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 1.708347] pci 0000:00:03.0: reg 0x10: [mem 0xd0730000-0xd0733fff 64bit]
[ 1.708494] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 1.708513] pci 0000:00:14.0: reg 0x10: [mem 0xd0720000-0xd072ffff 64bit]
[ 1.708569] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.708683] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 1.708704] pci 0000:00:16.0: reg 0x10: [mem 0xd0739000-0xd073900f 64bit]
[ 1.708772] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.708885] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[ 1.708903] pci 0000:00:19.0: reg 0x10: [mem 0xd0700000-0xd071ffff]
[ 1.708911] pci 0000:00:19.0: reg 0x14: [mem 0xd073f000-0xd073ffff]
[ 1.708919] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
[ 1.708984] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.709097] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 1.709118] pci 0000:00:1a.0: reg 0x10: [mem 0xd073e000-0xd073e3ff]
[ 1.709205] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.709319] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 1.709337] pci 0000:00:1b.0: reg 0x10: [mem 0xd0734000-0xd0737fff 64bit]
[ 1.709401] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.709519] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 1.709598] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.709768] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 1.709847] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 1.710012] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
[ 1.710092] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.710258] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 1.710279] pci 0000:00:1d.0: reg 0x10: [mem 0xd073d000-0xd073d3ff]
[ 1.710367] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.710483] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[ 1.710701] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 1.710718] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
[ 1.710725] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
[ 1.710732] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
[ 1.710740] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
[ 1.710747] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 1.710754] pci 0000:00:1f.2: reg 0x24: [mem 0xd073c000-0xd073c7ff]
[ 1.710796] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.710904] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 1.710920] pci 0000:00:1f.3: reg 0x10: [mem 0xd0738000-0xd07380ff 64bit]
[ 1.710934] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
[ 1.711094] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.711099] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
[ 1.711161] pci 0000:02:00.0: [14e4:4359] type 00 class 0x028000
[ 1.711196] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0503fff 64bit]
[ 1.711244] pci 0000:02:00.0: enabling Extended Tags
[ 1.711335] pci 0000:02:00.0: supports D1 D2
[ 1.711337] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.720026] pci 0000:00:1c.6: PCI bridge to [bus 02]
[ 1.720030] pci 0000:00:1c.6: bridge window [mem 0xd0500000-0xd05fffff]
[ 1.720095] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
[ 1.720195] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd0400fff]
[ 1.720655] pci 0000:03:00.0: supports D1 D2
[ 1.720656] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 1.730033] pci 0000:00:1c.7: PCI bridge to [bus 03]
[ 1.730038] pci 0000:00:1c.7: bridge window [mem 0xd0400000-0xd04fffff]
[ 1.731222] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.731284] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.731344] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.731404] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.731463] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.731524] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.731583] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.731642] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.732038] ACPI: EC: interrupt unblocked
[ 1.732044] ACPI: EC: event unblocked
[ 1.732050] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.732052] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 1.732111] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 1.732111] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.732111] pci 0000:00:02.0: vgaarb: bridge control possible
[ 1.732111] vgaarb: loaded
[ 1.732111] EDAC MC: Ver: 3.0.0
[ 1.732111] Registered efivars operations
[ 1.862734] PCI: Using ACPI for IRQ routing
[ 1.868294] PCI: pci_cache_line_size set to 64 bytes
[ 1.868352] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 1.868353] e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]
[ 1.868354] e820: reserve RAM buffer [mem 0x91b7e018-0x93ffffff]
[ 1.868355] e820: reserve RAM buffer [mem 0x9cb7f000-0x9fffffff]
[ 1.868356] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
[ 1.868357] e820: reserve RAM buffer [mem 0x43fe00000-0x43fffffff]
[ 1.868446] NetLabel: Initializing
[ 1.868446] NetLabel: domain hash size = 128
[ 1.868447] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.868460] NetLabel: unlabeled traffic allowed by default
[ 1.868463] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.868463] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.870018] clocksource: Switched to clocksource tsc-early
[ 1.879114] VFS: Disk quotas dquot_6.6.0
[ 1.879133] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.879199] pnp: PnP ACPI init
[ 1.879494] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.879497] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.879498] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.879500] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.879501] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
[ 1.879503] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.879504] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.879506] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.879507] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.879509] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved
[ 1.879514] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.879756] system 00:01: [io 0x0200-0x027f] has been reserved
[ 1.879758] system 00:01: [io 0xffff] has been reserved
[ 1.879760] system 00:01: [io 0xffff] has been reserved
[ 1.879761] system 00:01: [io 0xffff] has been reserved
[ 1.879762] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 1.879764] system 00:01: [io 0xef80-0xef9f] has been reserved
[ 1.879768] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.879818] system 00:02: [io 0x0800-0x087f] has been reserved
[ 1.879821] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.879843] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.880399] pnp 00:04: [dma 0 disabled]
[ 1.880476] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 1.880496] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 1.880515] pnp 00:06: Plug and Play ACPI device, IDs SYN3002 SYN0100 SYN0002 PNP0f13 (active)
[ 1.880879] system 00:07: [mem 0x20000000-0x201fffff] could not be reserved
[ 1.880881] system 00:07: [mem 0x40004000-0x40004fff] could not be reserved
[ 1.880884] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.881143] pnp 00:08: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 1.881163] pnp: PnP ACPI: found 9 devices
[ 1.887008] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.887033] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 1.887035] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 1.887045] pci 0000:00:1c.7: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref]
[ 1.887048] pci 0000:00:1c.7: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.887050] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.887056] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
[ 1.887063] pci 0000:00:1c.6: PCI bridge to [bus 02]
[ 1.887068] pci 0000:00:1c.6: bridge window [mem 0xd0500000-0xd05fffff]
[ 1.887075] pci 0000:00:1c.7: PCI bridge to [bus 03]
[ 1.887077] pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff]
[ 1.887082] pci 0000:00:1c.7: bridge window [mem 0xd0400000-0xd04fffff]
[ 1.887086] pci 0000:00:1c.7: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref]
[ 1.887092] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.887093] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.887094] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.887096] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window]
[ 1.887097] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window]
[ 1.887098] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window]
[ 1.887100] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window]
[ 1.887101] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
[ 1.887103] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
[ 1.887104] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.887105] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
[ 1.887107] pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref]
[ 1.887226] NET: Registered protocol family 2
[ 1.887362] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 1.887411] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.887560] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.887668] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.887707] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.887745] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.887813] NET: Registered protocol family 1
[ 1.887825] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.887834] pci 0000:00:14.0: enabling device (0000 -> 0002)
[ 1.888656] PCI: CLS 64 bytes, default 64
[ 1.888688] Unpacking initramfs...
[ 1.996798] Freeing initrd memory: 9156K
[ 1.996800] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.996803] software IO TLB [mem 0x953c4000-0x993c4000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 1.996914] Scanning for low memory corruption every 60 seconds
[ 1.997394] Initialise system trusted keyrings
[ 1.997403] Key type blacklist registered
[ 1.997451] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 1.998485] zbud: loaded
[ 1.999694] Key type asymmetric registered
[ 1.999696] Asymmetric key parser 'x509' registered
[ 1.999729] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.999762] io scheduler noop registered
[ 1.999763] io scheduler deadline registered
[ 1.999800] io scheduler cfq registered (default)
[ 1.999801] io scheduler mq-deadline registered
[ 1.999801] io scheduler kyber registered
[ 1.999806] io scheduler bfq registered
[ 2.000663] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[ 2.000684] pcieport 0000:00:1c.6: Signaling PME with IRQ 25
[ 2.000702] pcieport 0000:00:1c.7: Signaling PME with IRQ 26
[ 2.000720] pciehp 0000:00:1c.7:pcie004: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 2.000791] efifb: probing for efifb
[ 2.000803] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[ 2.000804] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 2.000804] efifb: scrolling: redraw
[ 2.000806] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.002250] Console: switching to colour frame buffer device 128x48
[ 2.003624] fb0: EFI VGA frame buffer device
[ 2.003632] intel_idle: MWAIT substates: 0x42120
[ 2.003633] intel_idle: v0.4.1 model 0x3C
[ 2.003783] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.003847] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 2.003854] ACPI: Sleep Button [SLPB]
[ 2.003884] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 2.003890] ACPI: Lid Switch [LID]
[ 2.003919] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.003938] ACPI: Power Button [PWRF]
[ 2.028686] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.028688] ACPI: Thermal Zone [CPUZ] (39 C)
[ 2.052895] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.052898] ACPI: Thermal Zone [GFXZ] (0 C)
[ 2.067980] thermal LNXTHERM:02: registered as thermal_zone2
[ 2.067983] ACPI: Thermal Zone [EXTZ] (26 C)
[ 2.083112] thermal LNXTHERM:03: registered as thermal_zone3
[ 2.083114] ACPI: Thermal Zone [LOCZ] (31 C)
[ 2.098281] thermal LNXTHERM:04: registered as thermal_zone4
[ 2.098284] ACPI: Thermal Zone [BATZ] (20 C)
[ 2.098692] thermal LNXTHERM:05: registered as thermal_zone5
[ 2.098694] ACPI: Thermal Zone [PCHZ] (114 C)
[ 2.098892] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.099879] intel_pstate: Intel P-state driver initializing
[ 2.100046] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.100673] NET: Registered protocol family 10
[ 2.109760] Segment Routing with IPv6
[ 2.109811] NET: Registered protocol family 17
[ 2.110426] RAS: Correctable Errors collector initialized.
[ 2.110504] microcode: sig=0x306c3, pf=0x10, revision=0x24
[ 2.110676] microcode: Microcode Update Driver: v2.2.
[ 2.110699] sched_clock: Marking stable (2110663195, 0)->(2114155578, -3492383)
[ 2.111243] registered taskstats version 1
[ 2.111257] Loading compiled-in X.509 certificates
[ 2.111303] zswap: loaded using pool lzo/zbud
[ 2.115382] Key type big_key registered
[ 2.115908] Magic number: 2:697:982
[ 2.115972] hctosys: unable to open rtc device (rtc0)
[ 2.117851] Freeing unused kernel memory: 1460K
[ 2.117853] Write protecting the kernel read-only data: 16384k
[ 2.118382] Freeing unused kernel memory: 2016K
[ 2.120258] Freeing unused kernel memory: 692K
[ 2.414439] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.415682] i8042: Detected active multiplexing controller, rev 1.1
[ 2.416801] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.416808] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.416810] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.416811] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.416813] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.422729] ACPI: bus type USB registered
[ 2.422807] usbcore: registered new interface driver usbfs
[ 2.422819] usbcore: registered new interface driver hub
[ 2.422930] usbcore: registered new device driver usb
[ 2.424399] SCSI subsystem initialized
[ 2.429250] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.429477] ehci-pci: EHCI PCI platform driver
[ 2.429507] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.429513] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.430054] libata version 3.00 loaded.
[ 2.430581] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 2.430586] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.430808] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.430810] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.430812] usb usb1: Product: xHCI Host Controller
[ 2.430814] usb usb1: Manufacturer: Linux 4.16.8-1-ARCH xhci-hcd
[ 2.430815] usb usb1: SerialNumber: 0000:00:14.0
[ 2.430950] hub 1-0:1.0: USB hub found
[ 2.430968] hub 1-0:1.0: 14 ports detected
[ 2.431902] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.431907] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.431957] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.431960] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.431961] usb usb2: Product: xHCI Host Controller
[ 2.431963] usb usb2: Manufacturer: Linux 4.16.8-1-ARCH xhci-hcd
[ 2.431964] usb usb2: SerialNumber: 0000:00:14.0
[ 2.432089] hub 2-0:1.0: USB hub found
[ 2.432105] hub 2-0:1.0: 6 ports detected
[ 2.432564] usb: port power management may be unreliable
[ 2.433376] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.433382] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.433394] ehci-pci 0000:00:1a.0: debug port 2
[ 2.437426] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.437444] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd073e000
[ 2.450022] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.450090] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.450092] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.450093] usb usb3: Product: EHCI Host Controller
[ 2.450094] usb usb3: Manufacturer: Linux 4.16.8-1-ARCH ehci_hcd
[ 2.450096] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.450219] hub 3-0:1.0: USB hub found
[ 2.450225] hub 3-0:1.0: 2 ports detected
[ 2.450588] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.450593] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.450604] ehci-pci 0000:00:1d.0: debug port 2
[ 2.454496] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.454509] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000
[ 2.462419] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.466678] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.466718] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.466720] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.466721] usb usb4: Product: EHCI Host Controller
[ 2.466723] usb usb4: Manufacturer: Linux 4.16.8-1-ARCH ehci_hcd
[ 2.466724] usb usb4: SerialNumber: 0000:00:1d.0
[ 2.466912] hub 4-0:1.0: USB hub found
[ 2.466918] hub 4-0:1.0: 2 ports detected
[ 2.467110] ahci 0000:00:1f.2: version 3.0
[ 2.467487] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.467524] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x35 impl SATA mode
[ 2.467529] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 2.498225] scsi host0: ahci
[ 2.498626] scsi host1: ahci
[ 2.498954] scsi host2: ahci
[ 2.499254] scsi host3: ahci
[ 2.499519] scsi host4: ahci
[ 2.499781] scsi host5: ahci
[ 2.499937] ata1: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c100 irq 29
[ 2.499942] ata2: DUMMY
[ 2.499948] ata3: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c200 irq 29
[ 2.499951] ata4: DUMMY
[ 2.499957] ata5: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c300 irq 29
[ 2.499964] ata6: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c380 irq 29
[ 2.760113] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ 2.783441] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.800113] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 2.814624] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.815939] ata1.00: NCQ Send/Recv Log not supported
[ 2.815945] ata1.00: ATA-9: Samsung SSD 840 Series, DXT06B0Q, max UDMA/133
[ 2.815950] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.816074] ata1.00: READ LOG DMA EXT failed, trying PIO
[ 2.816193] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 2.816903] ata1.00: NCQ Send/Recv Log not supported
[ 2.816948] ata1.00: failed to get Identify Device Data, Emask 0x1
[ 2.816956] ata1.00: configured for UDMA/133
[ 2.827442] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5
[ 2.901891] usb 1-5: New USB device found, idVendor=138a, idProduct=003f
[ 2.901899] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 2.901904] usb 1-5: SerialNumber: 00b07c01df94
[ 2.930839] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
[ 2.930847] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.931388] hub 3-1:1.0: USB hub found
[ 2.931486] hub 3-1:1.0: 6 ports detected
[ 2.947372] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
[ 2.947379] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.947837] hub 4-1:1.0: USB hub found
[ 2.948009] hub 4-1:1.0: 8 ports detected
[ 3.010114] tsc: Refined TSC clocksource calibration: 2494.210 MHz
[ 3.010139] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3dc117a2, max_idle_ns: 440795222026 ns
[ 3.010200] clocksource: Switched to clocksource tsc
[ 3.023450] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[ 3.144334] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.218608] usb 1-7: New USB device found, idVendor=04ca, idProduct=7034
[ 3.218616] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.218620] usb 1-7: Product: HP HD Webcam
[ 3.218625] usb 1-7: Manufacturer: DDMDH02UI6S7C3
[ 3.218628] usb 1-7: SerialNumber: 200901010001
[ 3.343452] usb 1-12: new full-speed USB device number 4 using xhci_hcd
[ 3.458010] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.486585] usb 1-12: New USB device found, idVendor=0a5c, idProduct=21f1
[ 3.486591] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.486596] usb 1-12: Product: BCM20702A0
[ 3.486600] usb 1-12: Manufacturer: Broadcom Corp
[ 3.486603] usb 1-12: SerialNumber: 3010B3A53262
[ 3.771358] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.782984] ata1.00: Enabling discard_zeroes_data
[ 3.783220] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 3.783304] sd 0:0:0:0: [sda] Write Protect is off
[ 3.783312] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.783421] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.783785] ata1.00: Enabling discard_zeroes_data
[ 3.787584] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 3.788380] ata1.00: Enabling discard_zeroes_data
[ 3.788797] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.813122] random: fast init done
[ 3.957233] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.092282] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 4.107077] systemd[1]: Detected architecture x86-64.
[ 4.113360] systemd[1]: Set hostname to <quiddi-hp-640>.
[ 4.259847] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.259876] systemd[1]: Reached target Login Prompts.
[ 4.265015] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.265046] systemd[1]: Reached target Remote File Systems.
[ 4.265249] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.267539] systemd[1]: Created slice User and Session Slice.
[ 4.267763] systemd[1]: Reached target Slices.
[ 4.268064] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.268406] systemd[1]: Listening on udev Control Socket.
[ 4.268773] systemd[1]: Listening on Journal Socket.
[ 4.318124] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 4.492865] systemd-journald[230]: Received request to flush runtime journal from PID 1
[ 4.567104] ACPI: AC Adapter [AC] (on-line)
[ 4.567246] input: HP Wireless hotkeys as /devices/virtual/input/input8
[ 4.580509] ACPI: Battery Slot [BAT0] (battery absent)
[ 4.624221] rtc_cmos 00:03: RTC can wake from S4
[ 4.624467] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.624502] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 4.634842] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4.635623] hp_accel: hardware type HPB64xx found
[ 4.637500] pps_core: LinuxPPS API ver. 1 registered
[ 4.637501] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.640717] EDAC ie31200: No ECC support
[ 4.640822] PTP clock support registered
[ 4.653240] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.675713] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002)
[ 4.675834] bcma: bus0: Found chip with id 43228, rev 0x00 and package 0x08
[ 4.675863] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
[ 4.675886] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
[ 4.675932] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0)
[ 4.675955] bcma: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0)
[ 4.678512] media: Linux media interface: v0.10
[ 4.678514] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 4.678516] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.680935] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20180105/utaddress-247)
[ 4.680944] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.680952] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20180105/utaddress-247)
[ 4.680958] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.681005] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20180105/utaddress-247)
[ 4.681010] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20180105/utaddress-247)
[ 4.681015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.681020] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20180105/utaddress-247)
[ 4.681024] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPIO) (20180105/utaddress-247)
[ 4.681028] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20180105/utaddress-247)
[ 4.681032] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000080F (\IO_T) (20180105/utaddress-247)
[ 4.681037] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.681038] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.683363] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.685836] Linux agpgart interface v0.103
[ 4.693050] parport_pc 00:04: reported by Plug and Play ACPI
[ 4.693113] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[ 4.696149] bcma: bus0: Bus registered
[ 4.704354] Linux video capture interface: v2.00
[ 4.760337] Bluetooth: Core ver 2.22
[ 4.760355] NET: Registered protocol family 31
[ 4.760355] Bluetooth: HCI device and connection manager initialized
[ 4.760359] Bluetooth: HCI socket layer initialized
[ 4.760362] Bluetooth: L2CAP socket layer initialized
[ 4.760368] Bluetooth: SCO socket layer initialized
[ 4.766059] lis3lv02d: 8 bits 3DC sensor found
[ 4.779695] uvcvideo: Found UVC 1.00 device HP HD Webcam (04ca:7034)
[ 4.783109] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 4.788273] uvcvideo 1-7:1.0: Entity type for entity Extension 5 was not initialized!
[ 4.788276] uvcvideo 1-7:1.0: Entity type for entity Extension 2 was not initialized!
[ 4.788278] uvcvideo 1-7:1.0: Entity type for entity Processing 3 was not initialized!
[ 4.788280] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
[ 4.788474] input: HP HD Webcam: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input13
[ 4.788618] usbcore: registered new interface driver uvcvideo
[ 4.788619] USB Video Class driver (1.1.1)
[ 4.790316] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 4.790318] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 4.790319] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 4.790320] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 4.790321] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 4.793486] usbcore: registered new interface driver btusb
[ 4.804599] cryptd: max_cpu_qlen set to 1000
[ 4.817360] AVX2 version of gcm_enc/dec engaged.
[ 4.817361] AES CTR mode by8 optimization enabled
[ 4.853184] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 4.911830] Bluetooth: hci0: BCM: chip id 63
[ 4.912828] Bluetooth: hci0: BCM: features 0x07
[ 4.928836] Bluetooth: hci0: BCM20702A
[ 4.929831] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 4.930043] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21f1.hcd failed with error -2
[ 4.930046] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21f1.hcd not found
[ 4.946986] ppdev: user-space parallel port driver
[ 4.964017] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 34:64:a9:d5:5a:54
[ 4.965187] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.965233] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 4.965279] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
[ 4.968402] iTCO_vendor_support: vendor-support=0
[ 4.972286] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.972345] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 4.973823] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.991019] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 4.991050] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.992918] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 4.993171] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 4.993822] hp_wmi: query 0xd returned error 0x5
[ 4.993876] input: HP WMI hotkeys as /devices/virtual/input/input14
[ 5.032600] intel-spi intel-spi: mx25l12805d (16384 Kbytes)
[ 5.034143] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[ 5.034147] snd_hda_codec_idt hdaudioC1D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 5.034149] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 5.034150] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0
[ 5.034152] snd_hda_codec_idt hdaudioC1D0: inputs:
[ 5.034154] snd_hda_codec_idt hdaudioC1D0: Mic=0xc
[ 5.034156] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11
[ 5.034157] snd_hda_codec_idt hdaudioC1D0: Line=0xf
[ 5.044370] Creating 1 MTD partitions on "intel-spi":
[ 5.044374] 0x000000000000-0x000001000000 : "BIOS"
[ 5.052686] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 5.081859] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 5.082510] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 5.082566] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 5.082621] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 5.082676] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 5.098138] intel_rapl: Found RAPL domain package
[ 5.098141] intel_rapl: Found RAPL domain core
[ 5.098142] intel_rapl: Found RAPL domain uncore
[ 5.098143] intel_rapl: Found RAPL domain dram
[ 5.107283] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 5.107286] fb: switching to inteldrmfb from EFI VGA
[ 5.107346] Console: switching to colour dummy device 80x25
[ 5.108042] [drm] Replacing VGA console driver
[ 5.109227] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.109228] [drm] Driver supports precise vblank timestamp query.
[ 5.109611] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.112849] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.114983] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.115014] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 5.115015] cfg80211: failed to load regulatory.db
[ 5.135683] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[ 5.194622] b43-phy0: Broadcom 43228 WLAN found (core revision 30)
[ 5.195016] b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 16
[ 5.195024] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1
[ 5.195550] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 5.202702] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.204535] b43 bcma0:1 wlp2s0b1: renamed from wlan0
[ 5.250179] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 5.473759] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 5.478017] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 5.513747] psmouse serio3: synaptics: queried max coordinates: x [..5672], y [..4826]
[ 5.547001] psmouse serio3: synaptics: queried min coordinates: x [1336..], y [1070..]
[ 5.547006] psmouse serio3: synaptics: Your touchpad (PNP: SYN3002 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 5.604467] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2758, fw id: 1530444
[ 5.636777] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 5.641856] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input11
[ 5.646249] mousedev: PS/2 mouse device common for all mice
[ 5.791001] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 6.000142] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 6.126924] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input21
[ 6.132570] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.133376] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input22
[ 6.133707] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.153247] fbcon: inteldrmfb (fb0) is primary device
[ 6.153428] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 6.250282] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 6.961198] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 6.961205] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[ 6.961261] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[ 7.259543] Console: switching to colour frame buffer device 200x56
[ 7.284117] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.349520] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[ 7.349572] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[ 7.349633] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25
[ 7.349686] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input26
[ 7.349738] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input27
[ 30.697553] random: crng init done
[ 30.697558] random: 7 urandom warning(s) missed due to ratelimiting
[ 351.253316] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 351.406688] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 667.243303] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 667.396816] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready
[ 983.269889] b43-phy0: Loading firmware version 784.2 (2012-08-15 21:35:19)
[ 983.423323] IPv6: ADDRCONF(NETDEV_UP): wlp2s0b1: link is not ready